VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB450SC Nighthawk — Jantes, rayons, joints de roue et valves

The 1982 CB450SC Nighthawk wheel selection focuses on the front bearing and rear seal. The bearing is individually sold, with two required at the front wheel; the rear seal supplies one piece. Keep their assembly locations and dimensions separate when building the wheel-service order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Honda CB450SC rear wheel seal 28 x 47.2 x 7

1982-86 Honda CB450SC Rear Wheel Seal ~ 28 x 47.2 x 7

$4.61 USD
27-9111
Replace your CB450SC Nighthawk rear wheel seal with this Rear Wheel Seal, 1 piece, 28 x 47.2 x 7mm. Made in Japan by OEM...
Comparer

1982 Honda CB450SC Nighthawk · Rims, Spokes, Wheel Seals & Tire Valve Stems Buying guide

Count the front bearings separately from the rear seal

The Japan-made 6302-2RS front bearing is one individually sold component. The Nighthawk rear-wheel seal is a separate 28 × 47.2 × 7 mm piece, also made in Japan by an OEM supplier.

Parts to consider

Honda CB 6302-2RS Front Wheel Bearing Individual 6302-2RS front bearingOne front bearing, sold each; two are required per front wheel. The source specifies two synthetic shields and Japanese manufacture.Voir la pièce 1982-86 Honda CB450SC Rear Wheel Seal ~ 28 x 47.2 x 7 Single Nighthawk rear-wheel sealOne 28 × 47.2 × 7 mm rear-wheel seal for the listed CB450SC application, made in Japan by an OEM supplier.Voir la pièce

Use the bearing quantity stated in the source

The front-bearing product is not a two-bearing pack. Two are required per front wheel, so enter an order quantity of two for replacement of both positions. Its two shields describe one bearing’s construction, not the number of bearings supplied.

Treat a swapped wheel as its own application

The source lists the original CB450SC front bearing and rear seal applications. A replacement wheel or hub needs its own bearing identification and seal dimensions checked; the motorcycle’s model name does not establish the requirements of changed wheel hardware.

Useful questions before ordering

Does the 6302-2RS listing supply a complete front-bearing pair?

Each bearing is sold individually, and the source specifies two required per front wheel. Order two pieces to replace both front positions; the two synthetic shields belong to each bearing and do not indicate a two-bearing package.

What identifies the rear seal when combining wheel-service parts?

The rear-wheel seal is one 28 × 47.2 × 7 mm piece for the listed CB450SC Nighthawk application. Keep that dimension and rear-wheel location on the order separately from the individually sold 6302-2RS front bearings.

Can these parts be selected solely by the bike model after a wheel swap?

The listings describe the compatible original front-bearing and rear-seal applications. They do not specify every alternative hub. Identify the changed wheel’s bearing arrangement and seal dimensions separately before using the original Nighthawk application to place the order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB450SC Nighthawk

Votre panier

×