VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1974 Honda CB450K — Pontets et embouts

Identify the upper bar mount on your 1974 CB450K before selecting this black two-clamp set. The listing gives Honda reference 95014-22200 and stock 7/8-inch bar application. Its separate hardware offer still needs a contents and fastening check for the assembly you intend to retain.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pontets et embouts

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1974 Honda CB450K · Clamps & End Plugs Buying guide

Match the mounting arrangement as well as the bar application

Two clamps, black finish and upper triple-clamp use are stated. Bolt-centre spacing and mounting threads are not given. Compare the installed upper assembly directly; the Honda reference does not document every replacement riser or custom mount.

Parts to consider

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Two black clamps, Honda 95014-22200 referenceListed for stock 7/8-inch bars and upper triple-clamp use. Establish the required fastening arrangement; hardware is offered separately rather than itemized with these clamps.Voir la pièce

Compare an altered upper mount directly

A riser change can retain the same bar diameter while changing the fastening interface. Identify the retained upper mount and compare the clamp arrangement against it. The description leaves bolt spacing and thread dimensions unstated, so obtain those details before using the motorcycle application to choose the replacement.

Keep the two clamps separate from fastening contents

The set’s explicit quantity applies to the clamps. It does not tell you the bolt lengths, threads or contents of the separately offered hardware. Determine the fastening pieces required at the actual upper assembly and confirm that other purchase independently, including what existing pieces you intend to retain.

Buying questions

What should I check if the bar fits but the upper mounting history is unknown?

Identify the upper assembly and its fastening arrangement before comparing Honda 95014-22200. Stock 7/8-inch bar fit is one stated requirement, while bolt spacing and threads are not given. Resolve those missing mounting details rather than relying on the bar diameter alone.

How should I choose hardware after finding that some original fasteners are missing?

Record the fastening requirements of the mount and the pieces that must be replaced. Hardware is offered separately, without a complete specification in this clamp description. Confirm the other purchase’s dimensions and contents against that list before finalizing the order.

How many clamps are supplied in the set?

The title specifies a set of two black clamps for stock 7/8-inch handlebars, replacing Honda 95014-22200. Mounting hardware is offered separately. Compare the fitted upper mount and identify its required fastening pieces before choosing the clamps and any additional hardware.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1974 Honda CB450K

Votre panier

×