VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB450K — Contacteurs et capteurs

Identify the brake-light component being serviced on your 1970 CB450K before choosing a switch or wiring piece. The hydraulic front switch has a stated thread; the rear switch and front sub-harness need their own comparisons with the mounting and wiring actually fitted.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Contacteurs et capteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 rear brake light switch

Honda CB Rear Brake Light Switch

$10.33 USD
12-0008
Replace your rear brake light switch with this Rear Brake Light Stop Switch. Exceptionally broad fitment across the SOHC CB750 lineup and virtually the...
Honda CB750 CB550 CB500 hydraulic stop light switch 35350-300-006

Honda CB Hydraulic Stop Light Switch ~ Replaces 35350-300-006

$24.95 USD
29-7021
Replace your hydraulic brake light switch with this Hydraulic Brake Light / Stop Switch, replacing OEM #35350-300-006 / #35350-300-016. 10mm x M1.25 thread.Key Features•...
Honda CB550 CB500 front brake light switch sub harness 35345-319-000

Honda CB Front Brake Light Switch Sub Harness ~ Replaces 35345-319-000

$7.00 USD
73-0104
Replace your front stop switch sub harness with this Front Stop / Brake Switch Sub Harness, replacing OEM #35345-319-000.Key Features• Front stop / brake...
Comparer

1970 Honda CB450K · Switches & Sensors Buying guide

Compare switch position, thread and wiring separately

The hydraulic switch specifies an M10 × 1.25 thread and front-brake application. The rear switch is separately described. The sub-harness references Honda 35345-319-000; it is a wiring component whose description does not itemize a supplied switch.

Parts to consider

Honda CB Hydraulic Stop Light Switch ~ Replaces 35350-300-006 M10 × 1.25 hydraulic stop switchHydraulic brake light switch referencing Honda 35350-300-006 / 35350-300-016. Its thread is stated as 10mm × 1.25, with front-brake application for the 1970 CB450K. Check the actual hydraulic connection before selecting.Voir la pièce Honda CB Rear Brake Light Switch Rear brake light stop switchRear brake light switch listed for the 1970 CB450K. Compare its mounting and wiring with the fitted switch. The description does not provide a complete thread, lead-length or surrounding-hardware specification.Voir la pièce Honda CB Front Brake Light Switch Sub Harness ~ Replaces 35345-319-000 Front brake-switch sub-harnessFront stop-switch wiring component referencing Honda 35345-319-000. Compare the connectors and route on the motorcycle. It is described as a sub-harness without a switch or complete main wiring loom listed as supplied.Voir la pièce

Use the thread specification with the complete fitted connection

The hydraulic switch’s M10 × 1.25 thread is a defined check, but the product description does not provide every dimension or surrounding fitting requirement. Compare the hydraulic connection and wiring on the motorcycle, particularly if its brake equipment has changed. Confirm any missing detail that determines the installation.

Check the wiring piece independently of the switch

The front sub-harness and hydraulic switch have different Honda references and separate listings. Compare the existing wiring ends before adding either part. A changed harness, switch location or brake assembly may need connection and length checks that the product descriptions alone cannot resolve.

Brake light component questions

Does a matching hydraulic thread settle the switch installation?

The stated M10 × 1.25 thread covers one connection check. Compare the complete fitting and wiring arrangement too, especially on a changed brake system. Confirm any missing dimensional or supplied-hardware detail needed for the installation before ordering.

Does the front sub-harness order also supply the hydraulic switch?

Its description identifies the wiring sub-harness and reference 35345-319-000, without listing a switch as supplied. The hydraulic switch is offered separately under 35350-300 references. Inspect both components before deciding which the repair requires.

What information should I confirm for a relocated rear switch?

Compare the mounting, wiring ends and required reach against the replacement photograph. Its description does not specify lead length or a complete mounting thread dimension. Confirm the measurements needed by the relocated arrangement rather than selecting solely by model year.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB450K

Votre panier

×