VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB450K — Suspension et roues

Use the fork and wheel assemblies fitted to your 1970 CB450K as the starting point for suspension purchases. Fork caps and seals have different dimensional checks, while shocks require length and mounting comparisons. Separate the steering, pivot and hub components needed for each planned repair.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 fork gaiters 51611-300-000

Honda CB Stock Type Fork Gaitors ~ Replaces 51611-300-000

$29.95 USD
27-1061
Replace your fork gaitors with this Black Stock Type Fork Gaitors Set of 2, replacing OEM #51611-300-000.Key Features• Stock-type black fork gaitors, set of...
Honda CB1100 CB1000 CB900 type shock absorber washer 90521-292-000

Honda CB OEM Type Shock Absorber Washer ~ Replaces 90521-292-000

$2.95 USD
49-0778
Replace your shock absorber washers with this Shock Absorber Washer, a replica of the OEM type used when installing shocks. Replaces OEM #90521-292-000.Note: 2...
Honda CB1100 CB1000 shock absorber joint rubber set 2 52484-292-000

Honda CB Shock Absorber Joint Rubber Set/2 ~ Replaces 52484-292-000

$6.76 USD
73-0093
Replace your shock joint rubbers with this Shock Absorber Joint Rubber Set of 2, replacing OEM #52484-292-000.Key Features• Shock absorber joint rubbers• Set of...
Honda CB1000 CB900 CB750 CB550 chrome steering stem nut 90304-415-000

Honda CB Chrome Steering Stem Nut ~ Replaces 90304-415-000

$9.95 USD
49-0786
Replace your steering stem nut with this Chrome Steering Stem Nut, hex nut size 30mm, replacing OEM #90304-415-000.Sold each. We also offer the matching...
Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Honda CB750 CB550 CB500 CB450 CB400 fork cap o-ring (set 2) 94608-50000

Honda CB Fork Cap O-Ring (Set/2)

$2.95 USD
49-0790
Replace your fork cap O-rings with this Fork Cap O-Ring Set of 2, replacing OEM #94608-50000 (qty 2).Key Features• Fork cap O-rings• Set of...
Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Honda CB750 CB550 CB500 CB450 CB350 swing arm felt set 2 52145-283-000

Honda CB Swing Arm Felt Set/2 ~ Replaces 52145-283-000

$6.76 USD
73-1129
Protect your swingarm and enhance rear suspension longevity with this OEM-style Swing Arm Felt Set. These felts are designed to sit inside the pivot...
Honda CB750 CB550 front fork top bridge triple tree washer kit 53235-300-000

Honda CB Front Fork Top Bridge / Triple Tree Washer Kit ~ Replaces 53235-300-000

$12.50 USD
73-0833
Avoid broken triple trees with this Front Fork Top Bridge / Triple Tree Washer Kit of 2 washers. These washers are needed in order...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB500 CB450 CL450K5 fork cover rubber set 51601-300-000

Honda CB Fork Cover Rubber Set ~ Replaces 51601-300-000

$29.95 USD
73-0836
Replace your fork cover rubbers with this Fork Cover Rubber Set of 2, replacing OEM #51601-300-000.Key Features• Fork cover rubbers• Set of 2• Replaces...
Nouveau
Honda CB750 CB500 CB450 rear wheel bearing retainer 41231-283-000

Honda CB Rear Wheel Bearing Retainer ~ Replaces 41231-283-000

$26.95 USD
28-4015
Replace your rear wheel bearing retainer with this Rear Wheel Bearing Retainer (sprocket side), replacing OEM #41231-283-000. Used on the sprocket side of the...
Honda CB1000 CB900 CB750 CB550 steering stem washer 90503-283-000

Honda CB Steering Stem Washer ~ Replaces 90503-283-000

$3.50 USD
49-0787
Replace your steering stem washer with this Chrome Steering Stem Washer, replacing OEM #90503-283-000.Sold each, order the quantity you require.Key Features• Chrome steering stem...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Honda CB black 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Black 335mm

$139.95 USD
06-3598
Stick with stock geometry but blacked out with this All-Black Stock-Length Shock Absorber Set. Black body, black progressive-wound heavy-duty springs, and a black end...
Honda CB750 CB650 CB550 CB450 CB400 steering bearing kit (2)

Honda CB Steering Bearing Kit (2)

$69.95 USD
28-2011
Upgrade your steering bearings with this Steering Bearing Kit. Tapered roller steering bearing conversion kit, superior to OEM quality with 10X the contact area...
Honda CB750 CB550 front reflector rubber base 33743-341-670

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...
Solde
Honda CB750 CB550 CB500 bronze thrust bushing set 2 52109-283-300

Honda CB Bronze Thrust Bushing Set/2 ~ Replaces 52109-283-300

$31.72 $24.95 USD
You save $6.77
73-0883
Upgrade your swingarm bushings with this Bronze Thrust Bushing Set of 2. Replace the cheaply made, worn-out factory swingarm bushings with a 2-piece set...
Honda CB750 CB450 CB350 CL350K4 fork spacer trim set 51608-300-000

Honda CB Fork Spacer Trim Set ~ Replaces 51608-300-000

$37.95 USD
27-1112
Restore your chrome fork boot tops with this Chrome Front Fork Spacer Trim Set of 2. These are the chrome ribs that cover the...
Honda CB750 CB500 CB450 CL450K5 steering stem bolt and washer set 92101-10040-0A

Honda CB750 / CB500 / CB450 / CL450K5 Steering Stem Bolt and Washer Set ~ Replaces 92101-10040-0A

$7.00 USD
73-1134
Restore front-end stability and ride confidence with this Steering Stem Bolt and Washer Set for classic Honda models. This precision-fit set includes 2 OEM-style...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Honda CB750 CB450 CL450K0 CL450K2 CL450K3 fork seals 91255-292-003

Honda CB Fork Seals ~ Replaces 91255-292-003

$22.95 USD
27-1077
Replace your earliest CB750K or CB450 fork seals with this Fork Seal Set, 35 x 46 x 11mm, replacing OEM #91255-292-003. Made in Japan...
Honda CB750 CB650 CB550 CB450 CB400 steering bearing kit

Honda CB Steering Bearing Kit

$69.95 USD
28-2011
Upgrade your steering bearings with this Steering Bearing Kit. Tapered roller steering bearing conversion kit, superior to OEM quality with 10X the contact area...
Honda CB750 CB550 CB500 swingarm dust seal cap (set 2) 52144-283-010

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-283-010

$9.95 USD
29-7024
Replace your swingarm dust seal caps with this Swingarm Dust Seal Metal Cap Set of 2. These metal caps fit on the ends of...
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3623
Go with a clean all-chrome stock-length setup without the end-cap detail using this Stock-Length Shock Absorber Set. Chrome body with chrome progressive-wound heavy-duty springs,...
Nouveau
Honda CB chrome 335mm shock absorber set side detail

Honda CB Stock Length Shock Absorber Set ~ Chrome 335mm

$139.95 USD
06-3588
Step up to a clean chromed-out rear end with this All-Chrome Stock-Length Shock Absorber Set. Features a chrome body, chrome progressive-wound heavy-duty springs, and...
Honda CB750K CB450K fork seal backup rings (pk 2) 51452-319-010

1970-72 Honda CB750K / CB450K Fork Seal Backup Rings (Pk/2) ~ Replaces 51452-319-010

$9.95 USD
73-1037
Replace your fork seal backup rings with this Fork Seal Backup Rings Pk/2, replacing OEM #51452-319-010. These rings go above the fork seals.Key Features•...
Honda CB750 CB550 CB500 CB450 35mm front fork tube bolt with o-ring 90123-300-000

Honda CB750 / CB550 / CB500 / CB450 35mm Front Fork Tube Bolt with O-Ring ~ Replaces Honda OEM 90123-300-000

$17.95 USD
29-6013
This aftermarket 35mm front fork tube bolt is used as the top cap/bolt on compatible Honda CB 35mm fork tubes. It replaces Honda OEM...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB750K CB450K fork internal circlip set 94521-50000

1970-72 Honda CB750K / CB450K Fork Internal Circlip Set

$7.95 USD
73-1036
Replace your fork internal circlips with this Fork Internal Circlip (50mm) Set of 2, replacing OEM #94521-50000.Key Features• Fork internal circlips• 50mm• Set of...
Honda CB black and chrome 335mm stock length shock absorber set

Honda CB Stock Length Shock Absorber Set ~ Black / Chrome 335mm

$139.95 USD
06-3603
Mix a blacked-out body with chromed-out springs using this Stock-Length Shock Absorber Set. Black body paired with chrome progressive-wound heavy-duty springs, a sharp two-tone...
Honda CB750 CB550 CB500 CB450 CL450K5 fork gaiters 51611-300-000

Honda CB Fork Gaitors ~ Replaces 51611-300-000

$29.95 USD
27-1089
Replace your fork gaitors with this Black Fork Gaitors Set of 2, replacing OEM #51611-300-000.Note: these are about 1.75" shorter than the stock type...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Honda CB650 CB550 CB500 CB450 rear wheel seal 34 x 55 x 9

Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9

$5.95 USD
27-9042
Replace your CB650, CB500T/CB550, or CB450K rear wheel seal with this Rear Wheel Seal, 1 piece, 34 x 55 x 9mm. Made in Japan...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Honda CB750 CB550 black steering stem nut joker machine 90304-415-000

Honda CB Black Steering Stem Nut ~ Joker Machine ~ Replaces 90304-415-000

$47.95 USD
12-0073
Dress up your steering stem with this Joker Machine Black Steering Stem Nut, 30mm hex, replacing OEM #90304-415-000. High-quality CNC-machined and made in the...
Honda CB500 CB550 CB450 CB350 stock design shock absorber set 321mm 52400-455-670XW

Honda CB Stock Design Shock Absorber Set ~ Chrome 321mm

$139.95 USD
06-3642
Restore factory-look rear suspension with this Stock-Design Shock Absorber Set, modelled after the original OEM shocks on a range of CB500, CB550, CB450/CL450, and...
Honda CB750 CB550 CB500 CB450 type black fork caps (set 2) joker machine 90123-300-000

Honda CB750 / CB550 / CB500 / CB450 Type Black Fork Caps (Set/2) ~ Joker Machine ~ Replaces 90123-300-000

$99.95 USD
73-1064
Top off your forks with these Joker Machine Brand Custom Black Fork Caps, set of 2, with O-rings. Replaces OEM #90123-300-000.High-quality CNC-machined from billet...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1970 Honda CB450K · Suspension & Wheel Buying guide

Choose from dimensions and references for the installed assemblies

The fork top bolt gives an M28 × 1.5 thread specification and includes an O-ring. Fork seals measure 35 × 46 × 11mm. Rear shock families have different stated lengths, which need checking independently of stock-related product names.

Parts to consider

Honda CB750 / CB550 / CB500 / CB450 35mm Front Fork Tube Bolt with O-Ring ~ Replaces Honda OEM 90123-300-000 35mm fork tube top bolt with O-ringAftermarket top bolt replacing 90123-300-000, with M28 × 1.5 thread and included O-ring. Sold individually; compare the installed fork before choosing quantity.Voir la pièce Honda CB Fork Seals ~ Replaces 91255-292-003 Fork seals, 35 × 46 × 11mmSeal set replacing 91255-292-003. Match the fitted fork and confirm the supplied piece count; the description does not explicitly give the number in the set.Voir la pièce Honda CB Stock Design Shock Absorber Set ~ Chrome 321mm Chrome 321mm stock-design shock setChrome body, cover and springs, with five preload positions and a 321mm center-of-eye-to-clevis measurement. Compare the installed mounts, measurement and applicable replacement references.Voir la pièce

Pièces connexes : Tapered steering bearing conversion kit · 6302-2RS front wheel bearing · Bronze pivot thrust bushings

Keep cap thread dimensions separate from fork size

The top bolt description states a 35mm fork application and M28 × 1.5 thread, referencing 90123-300-000. Those are different checks. Compare the thread, original reference and fork fitted before ordering; a nominal fork-size match alone cannot verify an altered fork’s cap requirements.

Treat shock names as product descriptions to investigate

The catalog’s stock-design family lists 321mm, while other stock-length sets list 335mm and custom shorty sets list 290mm. Compare each measurement and mounting style with the intended setup. The names do not establish one factory CB450K length or guarantee that a different set preserves existing geometry.

CB450K buying questions

Does a 35mm fork application confirm the top bolt thread?

The top bolt separately specifies M28 × 1.5 and reference 90123-300-000. Compare those details as well as fork size with the installed assembly. A changed fork must be identified from its own components rather than the original motorcycle year.

Can the front bearing’s required quantity be read as supplied pack size?

The 6302-2RS front bearing description states two used per front wheel but does not clearly state supplied quantity per order. Confirm the package count before buying for both positions. Keep that requirement separate from explicit quantities in other products.

Do the stock-related shock names prove one original CB450K length?

The listed stock-design and stock-length products state different dimensions, 321mm and 335mm. Check the installed shocks, measurement method, mounts and replacement references before choosing. The product names alone do not resolve an original or previously modified CB450K setup.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB450K

Votre panier

×