VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1970 Honda CB450K — Repose-pieds, sélecteurs, kicks et béquilles

Inspect the pegs, gear lever and stand on your 1970 CB450K before ordering rubber coverings or hardware. Passenger rubbers and their pin set are separate purchases. The stand pivot set and stopper rubber replace different components, so build the order from the parts needing attention.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Repose-pieds, sélecteurs, kicks et béquilles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB kick stand stopper rubber 95011-61000

Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000

$2.95 USD
07-4624
Replace a worn kick stand stopper with this Kick Stand Stopper Rubber "A", a direct replacement for OEM #95011-61000. Exceptionally broad fitment across the...
Honda CB1000 CB900 CB750 CB650 side stand spring 95014-72402

Honda CB1000/CB900/CB750/CB650 Side Stand Spring

$3.95 USD
49-0788
Replace your side stand spring with this Side Stand Spring, replacing OEM #95014-72402.Key Features• Side stand spring• Replaces OEM #95014-72402• Honda part name: Spring...
Épuisé
Honda CB gear shift lever rubber 95011-40000

Honda CB Gear Shift Lever Rubber ~ Replaces 95011-40000

$2.95 USD
02-2478
Replace a cracked, hardened, or missing gear shift rubber with this Gear Shift Rubber, a direct replacement for OEM #95011-40000. Fits an exceptionally broad...
Honda CB750 CB650 CB550 side stand pivot bolt and nut set 90108-283-000

Honda CB Side Stand Pivot Bolt & Nut Set ~ Replaces 90108-283-000

$4.61 USD
73-0893
Replace your side stand pivot hardware with this Side Stand Pivot Bolt & Nut Set, used to fasten the side stand in place. Replaces...
Honda CB750 CB550 CB500 CB450 CB350 passenger rear footrest rubber set 95011-31000

Honda CB Passenger Rear Footrest Rubber Set

$14.95 USD
73-0185
Replace your passenger rear footrest rubbers with this Passenger Rear Footrest Rubber Set of 2, replacing OEM #95011-31000.Key Features• Passenger rear footrest rubbers• Set...
Honda CB1000 CB900 CB750 passenger rear footpeg pin and cotter pin set 95015-83000

Honda CB Passenger Rear Footpeg Pin & Cotter Pin Set

$7.00 USD
73-0945
Replace your passenger rear footpeg pins with this Passenger Rear Footpeg Pin & Cotter Pin Set. Includes 2 footpeg pins and 2 cotter pins....
Honda CB750 CB450 CB350 CB175 CB125 footrest rubbers 50661-110-000

Honda CB Footrest Rubbers ~ Replaces 50661-110-000

$22.95 USD
73-0183
Replace your footrest rubbers with this Footrest Rubbers Set of 2, replacing OEM #50661-110-000.Key Features• Footrest rubbers• Set of 2• Replaces OEM #50661-110-000• Honda...
Honda CB750 CB450 CB360 CL450K1 CL450K2 gear change lever with rubber

Honda CB Gear Change Lever with Rubber

$18.95 USD
19-0072
Fit the DOHC / Nighthawk gear change lever with this Gear Change Lever with Rubber. Fits the DOHC 1979-82 CB750K/F, 1982-86 CB750SC Nighthawk, plus...
Comparer

1970 Honda CB450K · Foot Pegs, Gear Lever, Kick Starter, Side Stand & Center Stand Buying guide

Choose coverings, pins and stand components as separate repairs

The passenger pin set supplies two pins and two cotter pins; the passenger rubber set supplies two rubbers. Stand pivot hardware, stopper rubber and the shift covering have separate descriptions and references. Check which pieces the work actually requires.

Parts to consider

Honda CB Passenger Rear Footrest Rubber Set Passenger rear rubbers, set of twoTwo passenger rear footrest rubbers replacing 95011-31000. Compare the original coverings and peg arrangement before selecting replacements.Voir la pièce Honda CB Passenger Rear Footpeg Pin & Cotter Pin Set Passenger peg pins and cotter pinsSet containing two footpeg pins and two cotter pins, referencing 95015-83000. It does not state that rubber coverings or complete pegs are supplied.Voir la pièce Honda CB Side Stand Pivot Bolt & Nut Set ~ Replaces 90108-283-000 Side stand pivot bolt and nutSet replacing bolt 90108-283-000 and nut 94002-10000-0S. Check the stand and bracket separately rather than treating the set as a complete stand assembly.Voir la pièce

Pièces connexes : Stand stopper rubber, reference 95011-61000 · Gear shift lever rubber · Footrest rubbers, reference 50661-110-000

Keep the two footrest rubber references distinct

The passenger rear set references 95011-31000; the other footrest rubber set references 50661-110-000. Both descriptions specify two rubbers, but equal package quantities do not establish equal shapes or positions. Compare the fitted peg and removed covering before substituting one listing for the other.

Check the stand beyond its pivot hardware

The pivot set identifies its bolt and nut, while the stopper rubber replaces 95011-61000. Inspect each component involved in the stand repair. Neither description confirms a complete stand or bracket supplied, and the stopper listing does not clearly state a multi-piece package quantity.

CB450K buying questions

Does buying the passenger pin set renew the rubber coverings?

Its stated contents are two pins and two cotter pins. Passenger rear rubber coverings are a separate two-piece set. Check both the covering and retaining hardware on the fitted pegs before deciding whether the order needs one purchase or both.

Can the two footrest rubber sets be used interchangeably?

Their descriptions give different replacement references: passenger rear 95011-31000 and the other footrest set 50661-110-000. Compare the required rubber shape and fitted peg. Their two-piece package quantities do not establish interchangeability between the two products.

What if the shift lever has been replaced with an aftermarket part?

The shift rubber identifies reference 95011-40000 without internal dimensions. Compare the covering requirements of the lever actually fitted and confirm measurements where necessary. The original motorcycle application does not verify the rubber fit of a changed lever.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1970 Honda CB450K

Votre panier

×