Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Câbles

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Speedometer Cable ~ Replaces 44830-425-870

$22.66 USD
51-2304
Replace your CB speedometer cable with this Speedometer Cable in black, replacing OEM #44830-425-870. End-to-end length 38.5". Made in Japan.Key Features• Speedometer cable, black•...

Honda CB1000/CB900/CB750/CB650 Speedo Gear Plug

$43.95 USD
29-0538
Keep your speedo drive gear clean with this Speedo Gear Plug, 15mm outer diameter, 22mm long.Key Features• Speedo gear plug• 15mm outer diameter, 22mm...

1978 Honda CB400TII Hawk II · Speedometer Cable Buying guide

Confirm the length and both ends of the cable

This Japanese-made mechanical cable connects the speedometer system. Its total length is useful for comparison, but a successful choice also depends on the drive ends and the route around the fork and instruments.

Inspect the system before choosing a cable

Look for damage at the sheath and drive ends, and compare the existing routing with the Honda manual. A cable problem and a fault inside the instrument or wheel drive can present differently. Identify the failed component so the replacement order addresses the actual source.

Allow a natural path to the instrument

The cable’s 38.5-inch end-to-end length is a product specification, not permission to force a tight route. Changed handlebars or gauge brackets can alter the path. Match the end connections and check for a smooth, unstrained route through the steering range before returning the motorcycle to use.

Common buying questions

How long is this replacement cable?

It measures 38.5 inches end to end. Compare your existing cable using the same overall measurement, then check both drive fittings and the route needed by the instruments currently fitted.

Will it fit after fitting a custom speedometer?

A custom gauge may change the cable connection and routing. Check the instrument’s drive fitting, bracket position and required cable path before assuming the original-model replacement length is suitable.

Should I order by the length of the outer sheath alone?

Use the stated end-to-end measurement for comparison and inspect both fittings as well. Measuring only the sheath can give a different result, and changed gauge positions may require a different cable route.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×