VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB400TII — Guidon et commandes

Fresh grips and sound upper clamps address two different parts of the Hawk II cockpit. The available grips are 130 mm stock-style replacements for 7/8-inch bars, while the clamp set renews the upper holders. Check the fitted bar and throttle arrangement before ordering.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1978 Honda CB400TII Hawk II · Handlebar Controls Buying guide

Choose the grip ends and inspect the holders

Closed-end grips give a sealed outer end; the open-end version includes separate plugs. The upper clamp set is another purchase, so inspect the bar holders and their hardware while planning your cockpit refresh.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack stock-style rubber grips for 7/8-inch handlebars, 130 mm long, with closed ends.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica gripsBlack 130 mm grips for 7/8-inch handlebars. Open ends and separate end plugs let you choose the end finish.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black upper handlebar clampsTwo black upper clamps for 7/8-inch handlebars, replacing reference 95014-22200. Mounting hardware is separate.Voir la pièce

Select the end arrangement you actually need

Both grip choices are black replicas for 7/8-inch handlebars and use a 130 mm length. Choose closed ends for a covered bar end or the open-end version when you need removable plugs. Compare any bar-end accessories with the fitted bar before assuming they will share the space.

Inspect the upper clamps independently

The black clamp set contains two upper holders and references 95014-22200. Its mounting hardware is separate. Check the lower holders and the bar’s clamping area before replacement, then use the correct Honda assembly procedure instead of tightening damaged or mismatched pieces together.

Common buying questions

Are the grips genuine Honda?

These are stock-style replica rubber grips. Their Honda reference numbers identify the application, but they are not sold as genuine Honda grips; both choices are black and 130 mm long.

Which grips include end plugs?

The open-end version includes separate end plugs. The closed-end grips have molded closed ends, so decide which arrangement suits your handlebars and any accessories already fitted at the ends.

Does the clamp set include its mounting bolts?

Mounting hardware is separate from the two-clamp set. Inspect the existing bolts and lower holders before ordering, particularly if the motorcycle has been fitted with a different bar or upper bridge.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB400TII

Votre panier

×