Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1978 Honda CB400A · Starting & Charging Buying guide
Compare the standard six-wire regulator with the lithium-only Rick’s unit before ordering. The relay and starter service rubbers perform separate jobs. Identify the electrical fault and the actual battery rather than buying a matched-looking group.
Six-wire rectifier/regulatorTwo connector blocks: three yellow wires in one, three wires in a four-space block.Voir la pièce
Lithium-only Rick’s regulator14 V ±0.2 set point; omits the black signal wire and is not for standard lead-acid batteries.Voir la pièce
Starter solenoid relay1978 CB400A application referencing 35850-375-000 and 35850-286-027.Voir la pièce
Pièces connexes : 60 × 1.4 starter seal · 24.4 × 3.1 starter seal · Starter terminal boot
The six-wire regulator has three yellow wires in one block and three wires in a four-space block. The lithium-only Rick’s unit omits the black signal wire and specifies 14 V ±0.2. Confirm battery-maker requirements before choosing the latter.
The linked starter seals have different sizes: 60 × 1.4 and 24.4 × 3.1. Identify their locations in the applicable Honda documentation before ordering. The terminal boot protects the external connection, while the relay is a separate electrical component; neither replaces those seals.
No. That Rick’s unit is expressly for lithium-ion batteries and is not for standard lead-acid batteries. Its 14 V ±0.2 set point must also match the lithium battery manufacturer’s requirements.
It has three yellow wires in one connector block and three other wires in a four-space block. Compare terminal positions and the installed harness as well as the connector housings before ordering.
They are different specified sizes: 60 × 1.4 and 24.4 × 3.1. Match the removed seal and its service-manual position. Do not substitute one simply because both are listed under starter motor sealing.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.