VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB400A — Guidon et commandes

The handlebar fittings offered for the 1978 CB400A include black clamps and two styles of 130 mm replica grips. Confirm the installed bars and throttle sleeve before ordering. On this Hondamatic, the left lever operates the parking brake, so preserve its clearance during a refresh.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Guidon et commandes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Honda CB750 CB550 black handlebar clamp set 2 7 8 in. 95014-22200

Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200

$32.95 USD
73-1120
Secure your handlebars with confidence using this Black Handlebar Clamp Set. Designed for 7/8" bars, these clamps replicate the stock look and function while...
Comparer

1978 Honda CB400A · Handlebar fittings Buying guide

Choose grips and clamps around the fitted controls

Both grip styles suit 7/8-inch bars, but their end treatments differ. The black clamps are a separate mounting choice. Check the actual handlebar, throttle and parking-brake control arrangement before selecting parts.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack rubber OEM-style replicas for 7/8-inch handlebars, with a stated length of 130 mm.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica grips with plugsBlack 130 mm replica grips for 7/8-inch bars. The open-end version includes end plugs.Voir la pièce Honda CB Black Handlebar Clamp Set/2 ~ 7/8 in. ~ Replaces 95014-22200 Black handlebar clamp setSet of two black clamps for 7/8-inch handlebars, with the 1978 CB400A included in the application. Mounting hardware is offered separately.Voir la pièce

Choose the end treatment deliberately

The closed-end grips have a sealed rubber end, while the open-end version includes separate plugs. Both are OEM-style replicas rather than genuine Honda grips. If bar-end accessories are fitted, check their clearance and mounting requirements before assuming an open grip alone makes them compatible.

Preserve the Hondamatic control arrangement

The CB400A left-hand lever operates the parking brake, and the throttle is on the right. Compare grip length and available space around the controls. The clamp set is for 7/8-inch bars, with mounting hardware offered separately; check the upper mounting arrangement if the front end has changed.

Handlebar fittings buying questions

Are these genuine Honda grips?

They are OEM-style replica rubber grips. Both versions list replacement references 53165-390-780 and 53166-390-780, a 7/8-inch handlebar application and 130 mm length. Choose the end design that suits the fitted controls and accessories.

Which grip version includes end plugs?

The open-end version includes plugs. The closed-end version uses a closed rubber end. For bar-end mirrors or other accessories, compare the accessory mounting and clearance rather than assuming either grip package supplies the necessary fittings.

Will the clamps fit an aftermarket top bridge?

The clamps list the original CB400A application and 7/8-inch bars. For an aftermarket or changed top bridge, compare the mounting geometry and fasteners directly. Bar diameter alone does not verify the complete clamp installation.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB400A

Votre panier

×