VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB400A — Amortisseurs

The shock options in this CB400A category are universal 290 mm custom parts. They include eye-to-clevis and eye-to-eye designs, with different bushing sizes. Treat mounting geometry and usable clearance as the first decisions, before choosing black or chrome finishes.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Amortisseurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1978 Honda CB400A · Custom rear shocks Buying guide

Measure the custom installation before choosing a finish

Identical nominal length does not make the shock designs interchangeable. Establish the required mounting style and bushing dimensions, then assess how a 290 mm shock would work with the motorcycle’s actual rear suspension.

Parts to consider

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm Chrome 290 mm custom shocksCustom eye-to-clevis shocks with a 12 mm ID × 21 mm upper bushing and five-position spring preload. Verify the complete mounting arrangement.Voir la pièce Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm Black shrouded 290 mm custom shocksBlack body, shroud and springs; 290 mm eye-to-clevis, with a 12 mm ID × 21 mm upper bushing. Custom fitment requires measurement.Voir la pièce

Read the mounting specification first

The featured chrome and black shrouded shocks measure 290 mm eye-to-clevis and specify a 12 mm ID × 21 mm upper bushing. The eye-to-eye design in the grid instead specifies 10 mm ID × 21 mm bushings at both ends. Confirm all mounting dimensions before purchasing.

Treat the change as suspension work

The featured sets have five-position spring preload adjustment and progressive-wound springs. Those features do not establish the correct length, load suitability or travel for a particular build. Have the proposed installation checked by someone familiar with motorcycle suspension before ordering; choose the finish only after those checks.

Custom rear shocks buying questions

Are these a direct replacement for the original shocks?

These shocks are sold for custom applications. Compare their 290 mm length with the length needed for the intended installation, then check mounting style, suspension movement and clearance before deciding whether a set suits the motorcycle.

Can an eye-to-eye set replace an eye-to-clevis set?

The mounting ends and bushing specifications differ. The featured eye-to-clevis sets have a 12 mm ID upper bushing, while the eye-to-eye option uses 10 mm ID bushings at both ends. Verify the complete installation rather than matching length alone.

Do the chrome and black shrouded versions use the same listed dimensions?

Both featured shrouded versions specify 290 mm eye-to-clevis length, a 12 mm ID × 21 mm upper bushing and five-position spring preload. Choose the finish after confirming those specifications and the remaining mounting details for your build.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB400A

Votre panier

×