VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1978 Honda CB400A — Poignées

Choose between closed-end and open-end OEM-style rubber grips for the 1978 CB400A. Both have a stated 130 mm length and 7/8-inch handlebar application. The open-end version includes plugs; compare the fitted throttle sleeve and any bar-end accessories before selecting the end design.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1978 Honda CB400A · Handlebar grips Buying guide

Choose the grip ends to suit the fitted handlebars

The meaningful choice here is the end treatment, with the same stated length and bar application. Check the throttle-side fit and surrounding controls, especially where a previous owner has changed the handlebars.

Parts to consider

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack rubber OEM-style replicas for 7/8-inch handlebars, with a stated length of 130 mm.Voir la pièce Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica grips with plugsBlack 130 mm replica grips for 7/8-inch bars. The open-end version includes end plugs.Voir la pièce

Choose replica grips with the right finish at the ends

Both options are black rubber OEM-style replicas. The closed-end version finishes the bar with the grip itself; the open-end version supplies separate plugs. Decide which arrangement suits the motorcycle before ordering, rather than cutting or modifying a new grip to compensate for the wrong choice.

Check the controls as well as the bars

The throttle sleeve and available grip area matter when comparing the 130 mm length. Keep sufficient clearance for the controls and any bar-end accessory, and verify free throttle operation after installation using the service guidance. On the CB400A, the left lever belongs to the parking brake.

Handlebar grips buying questions

Are the open-end grips supplied with plugs?

Yes. The open-end product explicitly includes end plugs. Check the mounting arrangement separately if you plan to use bar-end mirrors or weights; the included plugs do not establish compatibility with a particular accessory.

Are these original Honda parts or reproductions?

They are factory-style replicas, with references 53165-390-780 and 53166-390-780. Both list the 1978 CB400A and have a stated 130 mm length. They are not described here as genuine Honda manufacture.

Will they fit if my motorcycle has different handlebars?

Check the 7/8-inch bar application, usable grip length and throttle sleeve. Also compare clearance around the switches and bar ends. The original-model fitment listing does not verify every aftermarket handlebar and throttle combination.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1978 Honda CB400A

Votre panier

×