VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB550SC Nighthawk — Flotteurs et composants de carburateur

The 1983 Honda CB550SC carburetor component choices include a float with pin, individually sold drain screws with O-rings and a twelve-piece throttle-and-choke shaft seal set. Compare the existing carburetor and the specific part being replaced before selecting a package.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB1100 CB1000 CB900 carb felt throttle and choke shaft seal set 12

Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12

$32.95 USD
33-0044
Replace worn or missing felt throttle and choke shaft seals during carburetor service on compatible vintage Honda CB models. These felt seals are used...
Nouveau
Épuisé
Honda CB700SC CB650SC CB550SC carb float 16013-KR3-980

Honda Nighthawk Carb Float with Pin ~ Replaces 16013-KR3-980

$19.95 USD
07-4650
Rebuild your Nighthawk's carburetor with this Carb Float with Pin, replacing OEM #16013-KR3-980 / #16013-MA6-003. A critical float for proper fuel metering on the...
Honda CB1100 CB1000 Keihin pd carb felt throttle shaft seal set 6

Honda CB Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$18.95 USD
33-0043
Replace worn or missing felt throttle shaft seals on Keihin PD carburetors. These felt seals are used during carburetor service or restoration to help...
Comparer

1983 Honda CB550SC · Carb Components Buying guide

Separate the float, bowl hardware and shaft seals

The float includes its pin; the drain screw includes an O-ring; the felt seal set states twelve pieces. These contents identify three different orders, and do not establish a complete carburetor service kit.

Parts to consider

Honda Nighthawk Carb Float with Pin ~ Replaces 16013-KR3-980 Nighthawk float with pinFloat referencing 16013-KR3-980 and 16013-MA6-003, with a pin included.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw Bowl drain screw with O-ringStock-type drain screw, expressly sold each, with an O-ring included.Voir la pièce Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12 Throttle and choke shaft feltsSet of twelve for compatible carburetors; the description includes the 1983 CB550SC.Voir la pièce

Check the drain screw description before counting

The selected stock-type drain screw is sold each and includes an O-ring. A second listing describes the same SKU and application with a different title suffix and photograph. Compare the fitted screw and confirm any difference before assuming that the two listings identify distinct designs.

Choose shaft seals by carburetor application

The twelve-piece set describes throttle and choke shaft felts for compatible constant-vacuum carburetors. Another set is explicitly conditional on Keihin PD carburetors. Check the actual carburetor type before selecting shaft seals; the motorcycle name alone does not resolve those application conditions.

Carb Components questions

Is the float supplied with its pin?

Yes. The float description includes a pin and references OEM 16013-KR3-980 and 16013-MA6-003. It does not give a per-bike count or multi-float package quantity, so confirm the number required separately.

How many felts are in the selected seal set?

The throttle-and-choke shaft seal set is expressly twelve pieces. Its description names compatible constant-vacuum applications and includes the CB550SC; compare the carburetors fitted before treating the model listing as a complete type check.

Does one drain-screw order include four screws?

The selected drain screw is sold each, with an O-ring. The description does not identify a four-screw package. Count the screws needing replacement rather than deriving an order quantity from the number of carburetors.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB550SC Nighthawk

Votre panier

×