VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1977 Honda CB550K — Pièces de bras oscillant

Swingarm pivot bushings, pivot-end dust caps and rear shock mount bushings are separate parts. Compare the old pieces at their actual mounting positions before ordering. The available bushing pairs do not make the dust caps or pivot locking hardware part of the same purchase.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Pièces de bras oscillant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 swingarm dust seal cap (set 2) 52144-362-000

Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000

$16.95 USD
73-1028
Replace your swingarm dust seal caps with this Swingarm Dust Seal Cap Set of 2. These caps go on the ends of the swingarm...
Nouveau
Honda CB750 CB550 CB500 rear shock swingarm bushing 40548-268-000

Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000

$6.20 USD
28-6918
Rear shock swingarm bushing designed to replace the original Honda component, matching OEM reference 40548-268-000. Fits between the shock and swingarm to provide proper...
Honda CB750 CB550 swingarm pivot bolt locknut w washer 90354-268-000

Honda CB Swingarm Pivot Bolt Locknut with Washer ~ Replaces 90354-268-000

$7.00 USD
29-7022
Replace your swingarm pivot bolt locknut and washer with this Swingarm Pivot Bolt Locknut with Locknut Washer. Replaces OEM #90354-268-000 (locknut) and #90526-268-000 (washer).Key...
Épuisé
Honda CB750 CB650 performance kibblewhite bronze swingarm bushing set 52108-457-300

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300

$69.95 USD
28-1038
Upgrade your swingarm bushings with this Kibblewhite High Performance Bronze Swingarm Bushing Set of 2, replacing OEM #52108-457-300 / #52108-422-300. Made in the USA...
Honda CB900 CB750 CB650 CB550 front fork oil lock piece 51432-371-003

Honda CB900 / CB750 / CB650 / CB550 Front Fork Oil Lock Piece ~ Genuine Honda 51432-371-003

$29.95 USD
99-5318
This genuine Honda front fork oil lock piece fits inside the front fork assembly on the Honda CB models listed below. It works with...
Comparer

1977 Honda CB550K · Swing Arm Parts Buying guide

Identify the pivot parts and shock mount separately

Build the order around the swingarm pivot’s existing pieces, then assess nearby shock mounting hardware independently. A fork oil-lock piece is not a substitute for either pivot bushings or a rear shock bushing.

Parts to consider

Honda CB High Performance Kibblewhite Bronze Swingarm Bushing Set ~ Replaces 52108-457-300 Kibblewhite bronze pivot bushing pairPair of bronze swingarm bushings referencing 52108-457-300 and 52108-422-300. Compare the retained pivot assembly and listed application.Voir la pièce Honda CB Swingarm Dust Seal Cap (Set/2) ~ Replaces 52144-362-000 Swingarm pivot dust-cap pairTwo pivot-end dust caps referencing 52144-362-000. Check the retained end fittings separately from the pivot bushings.Voir la pièce Honda CB Rear Shock Swingarm Bushing ~ Replaces 40548-268-000 Individual rear shock mounting bushingBushing listed at 19 mm long, 22 mm outside diameter and 10 mm inside diameter. This is a shock mounting part, not a pivot bushing pair.Voir la pièce

Pièces connexes : Pivot lock nut and washer

Keep the pivot-end pieces distinct

Both bronze bushing products are described as pairs, while the dust-cap product supplies two separate end caps. Inspect the retained pivot components before choosing replacements. The lock nut and washer are another purchase; their description does not provide a new pivot bolt with them.

Match the nearby shock bushing by measurement

The rear shock bushing has its own stated length and inside and outside diameters. Compare it with the shock mount being repaired rather than ordering it as a swingarm pivot bushing. The location and old part dimensions should both agree with the intended use.

Common questions

Are dust caps included with the bronze bushing pair?

The bushing pair and dust-cap pair are separate products. Compare the existing pivot-end pieces and order the needed parts independently; the bushing descriptions do not establish that dust caps are included.

Does the pivot lock nut set include a new bolt?

It is described as a lock nut with washer, referencing 90354-268-000 and 90526-268-000. A pivot bolt is not identified in those contents, so assess the retained bolt separately before ordering.

Can the Honda fork oil-lock piece repair the swingarm pivot?

No. Honda 51432-371-003 is an internal front-fork piece. For the swingarm pivot, compare the listed pivot bushing pairs, dust caps and locking hardware with the components fitted at that location.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1977 Honda CB550K

Votre panier

×