VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1977 Honda CB550K — Tubes, ressorts, joints et soufflets de fourche

A fork repair may need more than the visible dust boot. This selection includes oil seals, retaining rings, springs and a genuine Honda internal oil-lock piece. Identify the existing fork assembly and compare each part’s stated application before choosing the repair components.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 fork seals

Honda CB750 / CB650 / CB550 / CB500 Fork Seals

$19.95 USD
27-1007
Replace your fork seals with this Fork Seal Set, 35 x 48 x 10.5 / 11mm. High quality, made in Japan. Key Features• Fork...
Honda CB750 CB650 CB550 CB500 fork seal stopper metal rings (pk 2) 51447-KL4-951

Honda CB750 / CB650 / CB550 / CB500 Fork Seal Stopper Metal Rings (Pk/2) ~ Replaces 51447-KL4-951

$7.95 USD
73-0940
Replace your fork seal stopper metal rings with this Fork Seal Stopper Metal Ring Pk/2, replacing OEM #51447-KL4-951. This is the metal ring above...
Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Honda CB750 CB550 fork dust boot set

1975-78 Honda CB750 / CB550 Fork Dust Boot Set

$24.95 USD
27-1080
Replace your 35mm fork dust boots with this Fork Seal Dust Boot Set of 2 for 35mm fork tubes.Key Features• Fork dust boot set,...
Nouveau
Honda CB750 CB550 CB500 CB400 headlight stay headlight reflector bolt 90120-377-000

Honda CB750 / CB550 / CB500 / CB400 Headlight Stay / Headlight Reflector Bolt ~ Replaces 90120-377-000

$8.95 USD
99-4977
Upgrade or restore your classic Honda motorcycle headlight system with this Headlight Stay / Headlight Reflector Bolt — designed to secure the headlight reflector...
Honda CB750 CB550 CB500 CB450 35mm front fork tube bolt with o-ring 90123-300-000

Honda CB750 / CB550 / CB500 / CB450 35mm Front Fork Tube Bolt with O-Ring ~ Replaces Honda OEM 90123-300-000

$17.95 USD
29-6013
This aftermarket 35mm front fork tube bolt is used as the top cap/bolt on compatible Honda CB 35mm fork tubes. It replaces Honda OEM...
Honda CB750A CB550F CB550K Progressive type front fork springs

1974-78 Honda CB750A / CB550F / CB550K Progressive Type Front Fork Springs

$84.95 USD
33-0005
Upgrade your fork performance with this Progressive Type Front Fork Spring Set of 2, including 10" pipe and washers. Progressive springs improve handling and...
Honda CB750 CB650 CB550 front fork damper valve set

Honda CB750 / CB650 / CB550 Front Fork Damper Valve Set

$79.95 USD
27-1886
Upgrade your 35mm rod-style front forks to perform like modern cartridge forks with this Front Fork Damper Valve Set of 2. These tunable valves...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Honda CB900 CB750 CB650 CB550 front fork oil lock piece 51432-371-003

Honda CB900 / CB750 / CB650 / CB550 Front Fork Oil Lock Piece ~ Genuine Honda 51432-371-003

$29.95 USD
99-5318
This genuine Honda front fork oil lock piece fits inside the front fork assembly on the Honda CB models listed below. It works with...
Comparer

1977 Honda CB550K · Fork Tubes, Springs, Seals & Boots Buying guide

Separate the outer boot from the internal fork parts

Dust boots, oil seals, retaining rings and the oil-lock piece have different roles. Check what is fitted and what needs replacement before ordering several similarly named fork parts as though they were one complete kit.

Parts to consider

1975-78 Honda CB750 / CB550 Fork Dust Boot Set Fork dust-boot pairTwo boots for the listed 35 mm fork-tube application on 1977–78 CB550K. Compare their profile with the boots and fork fittings already installed.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 Fork Seals Fork oil-seal setOil seals with listed dimensions of 35 × 48 × 10.5/11 mm. Compare the retained seal and application rather than choosing by tube diameter alone.Voir la pièce Honda CB900 / CB750 / CB650 / CB550 Front Fork Oil Lock Piece ~ Genuine Honda 51432-371-003 Honda fork oil-lock pieceGenuine Honda 51432-371-003 internal fork piece, sold individually and listed for 1977–78 CB550K. Match the original part reference and fork assembly.Voir la pièce

Pièces connexes : Fork-seal retaining ring pair · Progressive-type fork spring pair · Fork top cap with O-ring

Order the sealing pieces by their individual roles

The dust-boot pair and oil-seal set are separate purchases. The retaining-ring package contains two metal rings that sit above the fork seals. Compare the removed or retained pieces and check the fork application; do not assume a seal purchase includes boots, rings or internal fittings.

Read the spring application before using loose pieces

The progressive-type kit includes two springs, a pipe and washers, but specifically excludes using the pipe or spacers and washers on CB550K/F. Consult the linked product instructions. That application note should guide the purchase; it does not establish compatibility for other internal fork parts.

Common questions

Does the dust-boot set also include oil seals?

The boot set is described as two dust boots. The oil seals and two-piece retaining-ring package are offered separately, so compare the needed parts before assuming the outer boot purchase covers the internal sealing components.

Is the oil-lock piece a swingarm bushing?

No. Honda 51432-371-003 is identified as an internal front-fork oil-lock piece. Match it to the fork assembly and original reference; it should not be selected as a swingarm pivot or rear shock mounting bushing.

Does a 35 mm fork application tell me the cap wrench size?

No. Tube diameter and the cap’s working hex are separate measurements. Compare the fitted cap with the tool specification; the listed 24 mm wrench is for the stated stock-cap application, not a dimension derived from tube diameter.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1977 Honda CB550K

Votre panier

×