VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB550F Supersport — Clignotants, supports, cabochons et réflecteurs

Restore your 1975 Honda CB550F turn signals and reflectors by matching the existing lamp housing and mounts. Lens gaskets, screw sets and screw-on reflectors are separate service choices. For complete lamps, compare front and rear wiring as well as appearance.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 reflector 33741-340-670

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...
Nouveau
Honda CB750 CB550 CB500 CB400 headlight stay headlight reflector bolt 90120-377-000

Honda CB750 / CB550 / CB500 / CB400 Headlight Stay / Headlight Reflector Bolt ~ Replaces 90120-377-000

$8.95 USD
99-4977
Upgrade or restore your classic Honda motorcycle headlight system with this Headlight Stay / Headlight Reflector Bolt — designed to secure the headlight reflector...
Nouveau
Honda CB750 CB550 CB500 headlight reflector rubber base 33743-375-000

Honda CB750 / CB550 / CB500 Headlight Reflector Rubber Base ~ Replaces 33743-375-000

$12.95 USD
99-4976
Replacement rubber base for restoring your CB750's headlight assembly back to proper condition. This is the rubber mount that the headlight reflector attaches to...
Honda CB900 CB750 CB650 CB550 turn signal lamp gasket 33406-377-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33406-377-671

$4.61 USD
11-2084
Replace the gasket on your turn signal with this Turn Signal Lamp Gasket, replacing OEM #33406-377-671. Pairs with our signal lamps #11-2114 and #11-2149...
Honda CB900 CB750 CB650 turn signal lamp lens screw set 93500-04025-0A

Honda CB Turn Signal Lamp Lens Screw Set ~ Replaces 93500-04025-0A

$2.95 USD
73-1034
Replace your turn signal lens screws with this Turn Signal Lamp Lens Screw Set of 2, replacing OEM #93500-04025-0A.Note: also fits our signal lens...
Comparer

1975 Honda CB550F · Signals & Reflectors Buying guide

Match signal fittings before changing the whole lamp

A sound signal housing may only need sealing or retaining hardware. Check its lens profile and screw arrangement first; the screw-on reflector uses its own mounting thread and is a separate component.

Parts to consider

Honda CB Turn Signal Lamp Gasket ~ Replaces 33406-377-671 Turn-signal lens gasketReplacement for reference 33406-377-671; suits the matching stock-style front and rear signal housings.Voir la pièce Honda CB Turn Signal Lamp Lens Screw Set ~ Replaces 93500-04025-0A Lens screw set of twoTwo screws for the matching signal lens and housings; replaces reference 93500-04025-0A.Voir la pièce Honda CB Stock Type Reflector ~ Replaces 33741-340-670 Screw-on reflectorStock-type reflector with a 6 mm mounting thread; replaces reference 33741-340-670.Voir la pièce

Renew the seal and screws together when needed

The featured lens gasket and two-screw set suit the matching stock-style lamps and amber lens. Compare the fitted housing and lens profile before ordering, especially after a signal conversion. A deteriorated gasket and damaged retaining screws can be replaced separately when the housing itself remains usable.

Keep lamp wiring and reflector mounts distinct

When replacing a complete signal lamp, compare its voltage, wire arrangement and mounting with the fitted unit. Front and rear connections can differ, especially after a signal conversion. The featured reflector instead screws onto a 6 mm mount, which should be checked independently of the lamp wiring.

Buying questions

How many signal lens screws are supplied?

The featured screw set contains two screws. It is matched to the stock-style signal housings and amber lens described here. Compare the housing’s retaining arrangement before deciding how many sets your repair requires.

Will the gasket fit a custom signal lamp?

Its application is the matching stock-style housing and lens, not every custom signal. Compare lens shape, gasket profile and retaining positions with the fitted lamp. An aftermarket housing may need a different seal even when it resembles the original.

Are the front and rear replacement lamps wired alike?

No. The front lamp is described as 12-volt with two wires; the rear as 12-volt with one wire. Confirm the fitted position and connection arrangement before choosing a lamp, rather than ordering solely by lens colour.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB550F Supersport

Votre panier

×