Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Supports, caoutchoucs et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 / CB550 / CB500 Speedometer / Tachometer Internal Rubber Seal

$11.95 USD
49-0255
Replace your gauge internal seal with this Speedometer / Tachometer Internal Rubber Seal. Replaces the ripped, dried, or missing rubber internal seal.Key Features• Speedo...
Épuisé
Honda CB chrome speedometer and tachometer cover set

Honda CB Chrome Speedometer & Tachometer Cover Set

$44.95 USD
02-2480
Dress up your gauge cluster with this Chrome Speedometer & Tachometer Cover Set. These chrome-plated covers fit over your stock speedo and tach to...

Honda CB Speedo/Tachometer Meter Cushion ~ Replaces 37235-323-700

$22.26 USD
73-0096
Replace your speedo / tach meter cushion with this Speedo / Tachometer Meter Cushion, replacing OEM #37235-323-700.Note: 2 used per bike, one for the...

Honda CB750 / CB550 / CB500 Speedometer & Tachometer Replacement Glass Lens Set/2

$44.95 USD
49-0250
Replace scratched or broken gauge glass with this Speedometer & Tachometer 92mm Glass Lens Set of 2. If the glass lens of your gauges...

Honda CB Trip Meter Knob Rubber Grommet

$17.50 USD
49-0256
Replace your trip meter knob grommet with this Day Trip Meter Knob Rubber Grommet. These grommets often dry out and rip; get a new...

1971-78 Honda CB550F / CB550K / CB500K Speedometer & Tachometer Crimp Ring Set/2

$64.95 USD
49-0247
Restore your gauge faces with this Speedometer & Tachometer Crimp Ring Set of 2 for NIPPON SEIKI gauges. When changing the speedometer or tachometer...

1975 Honda CB550F · Instrument Repair Parts Buying guide

Match repair parts to the instrument housing

Glass, closing rings and mounting cushions serve different positions. The featured crimp rings are specified for Nippon Seiki gauges; check the fitted instrument maker and dimensions before choosing parts for a rebuild.

Choose closing parts by maker and dimensions

The glass set contains two 92 mm lenses; the crimp-ring pair is specifically described for Nippon Seiki gauges with 103.4 mm inner and 108.2 mm outer diameters. Check the actual instruments before ordering. A housing changed during an earlier restoration may need different closing parts despite being mounted on a CB550F.

Keep external cushions separate from internal seals

The meter cushion supports the instrument at its mounting; it is not the internal glass seal. The application calls for one cushion at each instrument. The linked trip-meter grommet addresses another position, while the chrome cover set is a cosmetic outer cover with a cutout for the trip reset.

Buying questions

Can I use these crimp rings with any Honda gauge?

No. This pair is specified for Nippon Seiki gauges with the stated 103.4 mm inner and 108.2 mm outer diameters. Check the maker and housing dimensions on the installed instruments rather than relying solely on the motorcycle model.

Are both replacement glass lenses supplied together?

Yes. The glass product is a set of two slightly curved 92 mm lenses. Compare that size with the installed instruments and assess the housing, closing rings and seals before deciding what else the repair requires.

Is the meter cushion the rubber seal inside the gauge?

No. The meter cushion is the instrument mounting rubber, with one used at the speedometer and one at the tachometer in this application. Identify the worn position before ordering; an internal housing seal is a different part.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×