VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB550F Supersport — Outils pour moteur, direction et embrayage

The useful service choices for your 1975 Honda CB550F here cover fork caps, fork seals and converted spin-on oil filters. Those jobs use different tool dimensions and connections. Measure the cap and identify the fork and filter arrangement before purchasing.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 oil filter wrench

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD
35-9022
Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...
Honda CB750 CB650 CB550 CB500 35 36mm fork seal driver

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD
35-4299
Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...
Honda CB750 CB550 fork cap wrench 24mm

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD
35-9116
Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...
Universal motorcycle fork cap wrench 35mm

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD
35-9113
Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles.  Key Features Aftermarket part Sold as: Each Fitment...
Voir les détails
Comparer

1975 Honda CB550F · Fork & Filter Tools Buying guide

Keep cap size, seal-driver size and filter type separate

A fork-cap hex measurement is not a fork-tube diameter, and a spin-on wrench is not a stock filter-bolt tool. Identify the service point first so the tool’s working connection matches the assembly on your motorcycle.

Parts to consider

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm 24 mm non-marring fork-cap wrenchFor a 24 mm fork-cap hex; listed for original CB550F applications.Voir la pièce Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver 35/36 mm split fork-seal driverSplit-design tool for installing seals on the specified fork sizes.Voir la pièce Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench Three-eighths-drive spin-on filter wrenchTripod wrench for the listed aftermarket spin-on cartridge filter; not a paper-element housing tool.Voir la pièce

Measure the fork fittings independently

The stock-application cap wrench is specified at 24 mm, while the seal driver is for 35 or 36 mm fork sizes. These dimensions describe different tool connections. Check the fitted cap and fork before selecting either tool, especially when replacement front-end components have been installed.

Identify a converted oil-filter system

The tripod oil-filter wrench uses a three-eighths drive and is intended for aftermarket spin-on cartridge filters. It does not turn the original paper-filter housing bolt. Look at the filter installed on the engine before buying so a conversion-specific tool is not mistaken for an original-housing service wrench.

Common buying questions

Can I use the 35/36 mm seal driver on a fork cap?

No. The split seal driver is for installing fork seals and its size relates to the fork. A cap wrench engages the cap’s hex; measure that separate fitting before choosing the wrench.

Which cap-wrench size is listed for the original fork?

The 24 mm non-marring cap wrench is the stated stock CB550F application. Measure the fitted cap before purchasing because replacement forks or aftermarket caps can change the tool size required for the job.

Does the filter wrench work on the stock filter bolt?

The tripod wrench is specified for aftermarket spin-on cartridge filters. The original paper-element housing uses a different fastening arrangement; choose the service tool for the filter system actually fitted to the engine.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB550F Supersport

Votre panier

×