VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB500K Four — Joints et fixations

For a 1972 Honda CB500K header repair, check the gasket and retaining parts separately. The chrome clamp has a stated mounting-hole measurement, and the stud set has defined contents. Port gaskets can be bought one at a time or in a ten-pack.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Joints et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB kick stand stopper rubber 95011-61000

Honda CB Kick Stand Stopper Rubber ~ Replaces 95011-61000

$2.95 USD
07-4624
Replace a worn kick stand stopper with this Kick Stand Stopper Rubber "A", a direct replacement for OEM #95011-61000. Exceptionally broad fitment across the...
Honda CB550 CB500 CB200 exhaust headpipe gasket (each) 18291-216-000

Honda CB Exhaust Headpipe Gasket (Each) ~ Replaces 18291-216-000

$4.13 USD
17-2816
Replace one exhaust port gasket on your CB500/CB550 or smaller Honda with this Exhaust Port Gasket, 1 piece, replacing OEM #18291-216-000 / #18291-MN5-650. Fits...
Honda CB550F CB550K CB500K exhaust stud set

1971-78 Honda CB550F / CB550K / CB500K Exhaust Stud Set

$34.95 USD
73-1137
Restore secure and leak-free exhaust mounting on your vintage Honda with this premium Exhaust Stud Set. Designed for CB500K, CB550K, and CB550F models, this...
Honda CB550 CB500 CB400 CB350 CB100 chrome exhaust clamp 18231-323-000

Honda CB Chrome Exhaust Clamp ~ Replaces 18231-323-000

$24.95 USD
73-0090
Replace your exhaust clamp with this Chrome Exhaust Clamp, 14-fin type. Center-to-center mounting hole diameter 55mm. Replaces OEM #18231-323-000 / #18231-323-010 / #18231-333-010.Key Features•...
Honda CB550K CB500K muffler connecting tube 18473-323-000

1971-76 Honda CB550K / CB500K Muffler Connecting Tube ~ Genuine Honda 18473-323-000

$34.95 USD
99-5452
This genuine Honda muffler connecting tube fits original-style exhaust assemblies on the Honda CB500K and CB550K Four models listed below. It sits at the...
Honda CB550 CB500 CB200 exhaust headpipe gaskets (pk 10) 18291-216-000

Honda CB Exhaust Headpipe Gaskets ~ (Pk/10) ~ Replaces 18291-216-000

$32.95 USD
17-3816
Stock up on exhaust port gaskets for your CB500/CB550 or smaller twins with this 10-pack, replacing OEM #18291-216-000 / #18291-MN5-650.Key Features• Exhaust port gaskets,...
Comparer

1972 Honda CB500K · Gaskets & Mounting Hardware Buying guide

Check the clamp fit and the hardware package first

A fresh port gasket does not supply damaged fasteners, and a stud set does not supply the gasket. The current selections let you compare the clamp, complete listed stud hardware and larger gasket pack.

Parts to consider

Honda CB Chrome Exhaust Clamp ~ Replaces 18231-323-000 14-fin chrome header clampHeader-retaining clamp with 55mm center-to-center mounting holes. Listed replacements are 18231-323-000, 18231-323-010 and 18231-333-010; match the existing flange arrangement.Voir la pièce 1971-78 Honda CB550F / CB550K / CB500K Exhaust Stud Set Eight-stud exhaust hardware setListed package contains eight exhaust studs, eight washers and eight nuts for the CB500K application. Port gaskets and finned header clamps are not part of these listed contents.Voir la pièce Honda CB Exhaust Headpipe Gaskets ~ (Pk/10) ~ Replaces 18291-216-000 Ten-pack of exhaust port gasketsPack of ten gaskets with the same listed Honda references as the individual port gasket. The package does not include studs, clamps or connecting rubbers.Voir la pièce

Pièces connexes : Single exhaust port gasket · Honda muffler joint connecting tube

Inspect the flange arrangement before ordering

The 14-fin clamp listing gives 55mm mounting-hole spacing and three Honda replacement numbers. Match the fitted flange arrangement, not just the chrome appearance. An aftermarket header can change the retaining pieces required, so compare its hardware before combining it with an original-application clamp.

Keep package quantity and repair quantity separate

The gasket pack contains ten port gaskets; the individual listing supplies one. Both reference 18291-216-000 / 18291-MN5-650. Choose according to the repair and any spares you want, while keeping the separate stud-set contents and the muffler-joint connector out of the gasket count.

Header Gaskets & Retaining Hardware questions

Which Honda numbers identify the chrome clamp?

The listing names 18231-323-000, 18231-323-010 and 18231-333-010. Its stated 55mm hole spacing and 14-fin design are useful ordering checks, alongside the actual header flange and retaining arrangement on the motorcycle.

Is the ten-pack different from the single port gasket?

The listed Honda reference numbers are the same. The difference in these listings is supplied quantity: ten in the pack versus one individually. Neither is described as a set of clamps or a complete exhaust mounting kit.

How much of the four-cylinder mounting hardware does the stud set supply?

It provides eight studs, eight washers and eight nuts, totaling 24 components and two studs per exhaust port. Assess the finned clamps, collars and port gaskets separately; those pieces are not named among the stud-set contents.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB500K Four

Votre panier

×