VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1972 Honda CB500K Four — Trousses de réfection, pistons et vis de purge d’étrier

Service the 1972 CB500K front caliper by identifying its piston, hydraulic seal and adjustment hardware separately. The published piston dimensions and Honda references provide useful comparisons. Individual service parts should not be treated as a complete rebuild package just because they share an application.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Trousses de réfection, pistons et vis de purge d’étrier

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 CB750 CB650 caliper piston sealing ring 45108-300-003

Honda CB Caliper Piston Sealing Ring ~ Replaces 45108-300-003

$7.95 USD
29-0527
Replace your front caliper piston sealing ring with this Front Brake Caliper Piston Sealing Ring, replacing OEM #45108-300-003. Also fits the rear brake caliper...
Honda CB750 CB550 front brake caliper bleed screw rubber cap 45110-300-003

Honda CB Front Brake Caliper Bleed Screw Rubber Cap (Stock Type) ~ Replaces 45110-300-003

$3.95 USD
29-7018
Replace your front caliper bleed screw rubber cap with this Stock Type Front Brake Caliper Bleed Screw Rubber Cap, the same design as the...
Honda CB750 CB550 CB500 CB450 front caliper adjuster set 45117-341-700

Honda CB750 / CB550 / CB500 / CB450 Front Caliper Adjuster Set ~ Replaces 45117-341-700

$13.95 USD
29-7016
Restore your front caliper adjuster with this Front Brake Caliper Adjuster Set, including adjusting bolt, spring, washer, and nut. Replaces OEM #45117-341-700 (bolt), #45119-300-020...
Honda CB750 CB550 CB500 front brake caliper bleed screw 45224-579-013

Honda CB Front Brake Caliper Bleed Screw ~ Replaces 45224-579-013

$8.95 USD
73-0993
Replace your front caliper bleed screw with this Front Brake Caliper Bleed Screw, replacing OEM #45224-579-013.Key Features• Front brake caliper bleed screw• Replaces OEM...
Honda CB1100 CB1000 caliper bleed cap (pk 10) 45108-425-003

Honda CB Caliper Bleed Screw Rubber Cap (Pk/10) ~ Replaces 45108-425-003

$11.95 USD
29-0500
Stock up on caliper bleed screw rubber caps with this Brake Caliper Bleed Screw Rubber Cap 10-pack. Universal type for series 1, 3, 4,...
Nouveau
Honda CB550 CB500 CB450 CB400 CB360 front caliper piston 45107-323-020

Honda CB Front Caliper Piston ~ Replaces 45107-323-020

$21.78 USD
29-0058
Replace your front brake caliper piston with this Front Brake Caliper Piston, 38.15mm diameter x 34mm height, replacing OEM #45107-323-020. The side with the...
Honda CB750 CB550 front brake caliper bolt and washer set 90165-323-000

Honda CB Front Brake Caliper Bolt & Washer Set ~ Replaces 90165-323-000

$12.50 USD
73-1027
Replace your front caliper bolts and washers with this Front Brake Caliper Bolt & Washer Set. Includes 2 bolts and 2 washers. Replaces OEM...
Honda CB550 CB500 CB450 front brake caliper assembly 45100-390-405

Honda CB Front Brake Caliper Assembly ~ Replaces Honda OEM 45100-390-405

$119.95 USD
33-0039
Replace a worn, seized, damaged, or missing front brake caliper with this aftermarket full caliper assembly for Honda CB models. It is a replacement...
Comparer

1972 Honda CB500K · Caliper Rebuild Parts Buying guide

Compare the original caliper before selecting internal parts

A piston restores one component, the sealing ring is another purchase, and the adjuster set addresses external adjustment hardware. The bleed screw also has its own reference. Check each function and the actual caliper fitted before assembling the order.

Parts to consider

Honda CB Front Caliper Piston ~ Replaces 45107-323-020 38.15mm front caliper pistonReplacement for 45107-323-020, listed at 34mm high.Voir la pièce Honda CB Caliper Piston Sealing Ring ~ Replaces 45108-300-003 Separate hydraulic piston sealOne sealing ring supplied for the compatible piston, referenced to 45108-300-003.Voir la pièce Honda CB750 / CB550 / CB500 / CB450 Front Caliper Adjuster Set ~ Replaces 45117-341-700 Bolt, spring, washer and nutFour specified adjustment hardware types for the compatible front-caliper arrangement.Voir la pièce

Pièces connexes : Bleed screw referenced to 45224-579-013

Identify what the selected parts actually renew

The piston and its seal are independent listings. The adjuster set explicitly provides the adjusting bolt, spring, washer and nut, not the hydraulic piston or friction pads. Check the worn components on the caliper and compare the stated contents rather than assuming one item completes the job.

Check a replacement caliper on its own merits

A motorcycle that has a changed caliper may need different service hardware from the original application. Compare the casting, piston dimensions and applicable references first. The bleed-screw listing specifically calls for matching the caliper and seat design, so visual similarity alone is not a reliable ordering check.

Common questions

What must match before I choose the replacement caliper piston?

Compare Honda reference 45107-323-020 and the stated 38.15 mm diameter by 34 mm height with the fitted caliper. The source places the 2 mm outer lip toward the pad. Size alone does not identify a changed caliper application.

Which hydraulic seal belongs in the service order?

The separately listed piston seal references 45108-300-003 and supplies one ring for one compatible piston bore. It is the pressure seal rather than an external dust boot. Compare its reference and the retained bore when ordering alongside the piston.

Which caliper parts are covered by the adjustment package?

The package includes adjusting bolt 45117-341-700, spring 45119-300-020, washer and nut for the compatible pivoting arrangement. Match that mechanical hardware with the fitted caliper. Piston, hydraulic seal and bleed screw remain separate service items with their own references.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1972 Honda CB500K Four

Votre panier

×