VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB500K Four — Clignotants, supports, cabochons et réflecteurs

Turn-signal mounting repairs on a 1971 Honda CB500K need the correct position and stem dimensions. The current choices include front stays, rear stays and a left-and-right rear mount set. Compare the existing supports before ordering; similar chrome pieces can have different lengths and functions.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 front reflector rubber base 33743-341-670

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...
Honda CB750K CB550K CB500K rear turn signal stay 33607-323-670

1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Stay ~ Replaces 33607-323-670

$19.95 USD
11-2319
Fit the standard-length rear signal stay with this Rear Signal Lamp Stay in chrome, 65mm long, replacing OEM #33607-323-670. Pairs with signal lamp #11-2122....
Honda CB750K CB550K CB500K rear turn signal mount and collar set 33605-323-670

1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Mount & Collar Set ~ Replaces 33605-323-670

$42.95 USD
73-0127
Mount your rear signals with this Rear Turn Signal Mount, Collar and Rubber Set. Includes both left and right sides. Needed when installing the...
Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750K CB550K CB500K turn signal pinch bolt set

1969-74 Honda CB750K / CB550K / CB500K Turn Signal Pinch Bolt Set

$7.00 USD
73-0840
Replace your turn signal mounting hardware with this Turn Signal Pinch Bolt Set. Includes 2x chrome bolts, 2x hex nuts, and 4x flat washers,...
Honda CB750 CB550 CB500 CB350 front turn signal stay

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay

$13.95 USD
73-1106
Mount a front turn signal with this Front Signal Lamp Stay, Chrome.Body length 40mm, thread 30mm, total length 70mm.Note: we sell these in various...
Honda CB750 CB500 CB450 CB400 turn signal lamp gasket 33443-268-671

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...
Honda CB750 CB550 CB500 CB350 front turn signal stay short type

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay ~ Short Type

$13.95 USD
73-1105
Mount a front turn signal with this Front Signal Lamp Stay with nut and washer, Short Type, Chrome.Body length 26mm, thread 21mm, total length...
Honda CB750 CB550 CB500 CB360 rear turn signal stay 33441-369-000

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...
Comparer

1971 Honda CB500K · Turn Signals Buying guide

Match each signal support to its position and dimensions

A front stay, standard-length rear stay and rear mounting set are separate purchases. The listing gives body, threaded and overall measurements for the front stay, while the rear choices distinguish standard and extended lengths. Identify the installed arrangement first.

Parts to consider

Honda CB Front Turn Signal Stay 90 mm front signal stayChrome front stay with a 65 mm body and 25 mm threaded section. One stay is included; measure the existing front mounting arrangement.Voir la pièce 1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Stay ~ Replaces 33607-323-670 65 mm rear signal stayA standard-length chrome rear stay referenced to Honda 33607-323-670. It supports the signal lamp; this is not the separate longer 125 mm version.Voir la pièce 1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Mount & Collar Set ~ Replaces 33605-323-670 Rear mount, collar and rubber setSupplies left and right rear mounts with collars and rubber components. The mounts support the signals; they do not include signal lamps.Voir la pièce

Pièces connexes : Turn-signal lens gasket

Compare all three front-stay measurements

The front stay is listed with a 65 mm body, 25 mm threaded section and 90 mm overall length. Compare the corresponding points on the installed part, including the depth of its mounting. A shorter front stay is separately listed; a chrome appearance does not make those lengths interchangeable.

Separate the rear stay from its mounting set

The standard rear stay is listed at 65 mm, with a 125 mm extended version offered separately. The left-and-right mounting set supplies mounts, collars and rubber components instead. Inspect each piece of the existing assembly before ordering so you replace the damaged support rather than a different component.

Questions about turn signals

What dimensions identify the featured front stay?

Its body is 65 mm long, its threaded section is 25 mm and its overall length is 90 mm. One stay is supplied. Compare those measurement points and the existing mounting depth before choosing it.

What should I compare on the 65 mm rear stay besides length?

The standard rear stay references Honda 33607-323-670. Its listing warns that the mounting end can be larger than stock on some applications. Compare the end diameter and existing mount before ordering; mounting adaptation may be needed.

What is included in the rear mounting set?

The listing supplies left and right rear mounts with their collars and rubber components. The left replaces 33605-323-670 and the right 33606-074-010. Match those attachment pieces separately from the stay when planning a rear support repair.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB500K Four

Votre panier

×