VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB500K Four — Trousses de réfection, pistons et vis de purge d’étrier

For the 1971 CB500K front caliper, compare the existing piston, sealing ring and hardware before ordering. This category contains individual service pieces as well as an assembly listing; a piston or seal alone is not a complete caliper rebuild kit.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Trousses de réfection, pistons et vis de purge d’étrier

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 CB750 CB650 caliper piston sealing ring 45108-300-003

Honda CB Caliper Piston Sealing Ring ~ Replaces 45108-300-003

$7.95 USD
29-0527
Replace your front caliper piston sealing ring with this Front Brake Caliper Piston Sealing Ring, replacing OEM #45108-300-003. Also fits the rear brake caliper...
Honda CB750 CB550 front brake caliper bleed screw rubber cap 45110-300-003

Honda CB Front Brake Caliper Bleed Screw Rubber Cap (Stock Type) ~ Replaces 45110-300-003

$3.95 USD
29-7018
Replace your front caliper bleed screw rubber cap with this Stock Type Front Brake Caliper Bleed Screw Rubber Cap, the same design as the...
Honda CB750 CB550 CB500 CB450 front caliper adjuster set 45117-341-700

Honda CB750 / CB550 / CB500 / CB450 Front Caliper Adjuster Set ~ Replaces 45117-341-700

$13.95 USD
29-7016
Restore your front caliper adjuster with this Front Brake Caliper Adjuster Set, including adjusting bolt, spring, washer, and nut. Replaces OEM #45117-341-700 (bolt), #45119-300-020...
Honda CB750 CB550 CB500 front brake caliper bleed screw 45224-579-013

Honda CB Front Brake Caliper Bleed Screw ~ Replaces 45224-579-013

$8.95 USD
73-0993
Replace your front caliper bleed screw with this Front Brake Caliper Bleed Screw, replacing OEM #45224-579-013.Key Features• Front brake caliper bleed screw• Replaces OEM...
Honda CB1100 CB1000 caliper bleed cap (pk 10) 45108-425-003

Honda CB Caliper Bleed Screw Rubber Cap (Pk/10) ~ Replaces 45108-425-003

$11.95 USD
29-0500
Stock up on caliper bleed screw rubber caps with this Brake Caliper Bleed Screw Rubber Cap 10-pack. Universal type for series 1, 3, 4,...
Nouveau
Honda CB550 CB500 CB450 CB400 CB360 front caliper piston 45107-323-020

Honda CB Front Caliper Piston ~ Replaces 45107-323-020

$21.78 USD
29-0058
Replace your front brake caliper piston with this Front Brake Caliper Piston, 38.15mm diameter x 34mm height, replacing OEM #45107-323-020. The side with the...
Honda CB750 CB550 front brake caliper bolt and washer set 90165-323-000

Honda CB Front Brake Caliper Bolt & Washer Set ~ Replaces 90165-323-000

$12.50 USD
73-1027
Replace your front caliper bolts and washers with this Front Brake Caliper Bolt & Washer Set. Includes 2 bolts and 2 washers. Replaces OEM...
Honda CB550 CB500 CB450 front brake caliper assembly 45100-390-405

Honda CB Front Brake Caliper Assembly ~ Replaces Honda OEM 45100-390-405

$119.95 USD
33-0039
Replace a worn, seized, damaged, or missing front brake caliper with this aftermarket full caliper assembly for Honda CB models. It is a replacement...
Comparer

1971 Honda CB500K · Caliper Service Parts Buying guide

Identify the caliper component that needs replacement

The piston, hydraulic sealing ring, caliper adjuster and bleed screw perform separate jobs. Use their descriptions and references to plan the repair, with special attention to damaged original hardware or a replacement caliper already installed.

Parts to consider

Honda CB Front Caliper Piston ~ Replaces 45107-323-020 Front caliper pistonListed 38.15mm diameter × 34mm height; replaces Honda reference 45107-323-020.Voir la pièce Honda CB Caliper Piston Sealing Ring ~ Replaces 45108-300-003 Caliper piston sealing ringSeparate front-caliper seal replacing Honda reference 45108-300-003.Voir la pièce Honda CB750 / CB550 / CB500 / CB450 Front Caliper Adjuster Set ~ Replaces 45117-341-700 Caliper adjuster hardware setContains the adjusting bolt, spring, washer and nut for the listed application.Voir la pièce

Pièces connexes : Front caliper bleed screw

A piston and a seal are separate purchases

The piston listing specifies the piston dimensions and replacement reference; the sealing ring is a separate product. Do not count a photograph as proof that another part is supplied. Check the individual contents and the existing caliper’s condition before deciding which pieces to replace.

Keep adjustment hardware distinct

The adjuster set includes a bolt, spring, washer and nut. It does not replace the hydraulic piston or its sealing ring. If the caliper has already been changed, verify the installed assembly and the appropriate references before buying service hardware for the original arrangement.

Common questions

Which piston dimensions and reference must match my caliper?

The piston references Honda 45107-323-020 and measures 38.15 mm diameter by 34 mm height. Compare the fitted caliper and reference, especially after modifications. The source also identifies the 2 mm outer-lip side as facing the brake pad.

What is included in the adjuster set?

The package contains an adjusting bolt, spring, washer and nut, referencing 45117-341-700, 45119-300-020, 94101-06800 and 94001-06200. Match the compatible pivoting-caliper arrangement; piston, hydraulic seal and bleed screw are separately listed service parts.

Which sealing parts should I compare for a piston replacement?

The hydraulic piston ring separately references 45108-300-003 and supplies one seal per compatible piston bore. It is not a dust boot. Compare the piston surface, bore and seal groove alongside the 45107-323-020 piston before choosing the service parts.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB500K Four

Votre panier

×