VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB650 — Jantes, rayons, joints de roue et valves

Wheel work on the 1980 CB650 requires the actual hub and rim combination to be identified before spokes are ordered. The front and rear sets support different stock wheel diameters and have different contents. Wheel seals and bearings should be matched independently to their positions.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB900 CB750 CB650 front wheel bearing retainer 44643-300-000

Honda CB Front Wheel Bearing Retainer ~ Replaces 44643-300-000

$16.95 USD
28-4016
Replace your front wheel bearing retainer with this Front Wheel Bearing Retainer, replacing OEM #44643-300-000. Exceptionally broad fitment across the SOHC and DOHC CB750...
Nouveau
Honda CB1100 CB900 CB750 CB650 6304-2RS rear wheel bearing

Honda CB1100 / CB900 / CB750 / CB650 6304-2RS Rear Wheel Bearing

$21.95 USD
28-6304
Keep your rear wheel spinning smoothly with this Rear Wheel Bearing (6304-2RS), designed as a high-quality replacement for worn or aging factory bearings. Manufactured...
Nouveau
Honda CB750 CB650 Honda rear wheel bearing retainer 41231-300-020

Honda CB750 / CB650 Genuine Honda Rear Wheel Bearing Retainer ~ OEM 41231-300-020

$49.95 USD
99-5388
Upgrade or restore your classic Honda motorcycle with this Genuine Honda Rear Wheel Bearing Retainer — precision‑engineered and made in Japan. This authentic OEM...
Honda CB750 CB650 rear wheel damper rubber 41241-300-050

1976-82 Honda CB750 / CB650 Rear Wheel Damper Rubber ~ Replaces 41241-300-050

$19.95 USD
73-1054
Replace your rear wheel drive damper rubbers with this Rear Wheel Drive Damper Rubber, replacing OEM #41241-300-050. These fit between the rear wheel sprocket...
Honda CB1100 CB900 CB750 6305-2RS rear wheel bearing 96140-63050-10

Honda CB 6305-2RS Rear Wheel Bearing ~ Replaces 96140-63050-10

$21.95 USD
28-6305
Replace your rear wheel bearing with this 6305-2RS Rear Wheel Bearing with 2 synthetic shields, replacing OEM #96140-63050-10. High quality, made in Japan.Key Features•...
Honda CB900 CB750 CB650 front wheel seal kit

Honda CB900 / CB750 / CB650 Front Wheel Seal Kit

$7.95 USD
27-9018
Replace your DOHC CB front wheel seals with this Front Wheel Seal Kit of 2 pieces. Made in Japan by OEM supplier.Key Features• Front...
Honda CB650 CB550 CB500 CB450 rear wheel seal 34 x 55 x 9

Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9

$5.95 USD
27-9042
Replace your CB650, CB500T/CB550, or CB450K rear wheel seal with this Rear Wheel Seal, 1 piece, 34 x 55 x 9mm. Made in Japan...
Honda CB750K CB650 front wheel spoke set

1979-82 Honda CB750K / CB650 Front Wheel Spoke Set

$54.95 USD
73-0176
Re-spoke your 19" front wheel with this Front Spoke Set with Nipples and O-Rings, 40 spokes with 40 nipples and 40 metal O-rings. Both...
Honda CB750K CB650 rear wheel spoke set

1980-82 Honda CB750K / CB650 Rear Wheel Spoke Set

$54.95 USD
73-0177
Re-spoke your 17" rear wheel with this Rear Spoke Set with Nipples, 40 spokes with 40 nipples. Both spokes and nipples are silver.Key Features•...
Comparer

1980 Honda CB650 · Wheel Spokes & Seals Buying guide

Match each spoke package to its wheel assembly

The front set supports the listed stock 19-inch wheel; the rear supports the stock 17-inch wheel. Both have forty spokes and nipples, with metal O-rings additionally listed in the front package.

Parts to consider

1979-82 Honda CB750K / CB650 Front Wheel Spoke Set Front 19-inch spoke setForty spokes, forty nipples and forty metal O-rings for the listed stock 19-inch wheel.Voir la pièce 1980-82 Honda CB750K / CB650 Rear Wheel Spoke Set Rear 17-inch spoke setForty spokes with forty nipples for the listed stock 17-inch rear wheel.Voir la pièce Honda CB650 / CB550 / CB500 / CB450 Rear Wheel Seal ~ 34 x 55 x 9 Rear wheel sealIndividual 34 × 55 × 9mm seal for the listed CB650 rear wheel.Voir la pièce

Pièces connexes : Front wheel seal kit · 6304-2RS rear wheel bearing · 6305-2RS rear assembly bearing

Keep front and rear spoke packages distinct

The front listing includes forty metal O-rings in addition to spokes and nipples. The rear lists forty spokes and forty nipples. Match the wheel, hub and lacing requirements before purchasing; a wheel of the same diameter from another application is not automatically equivalent.

Plan seals and bearings by location

The individual rear seal measures 34 × 55 × 9mm. A two-piece front seal kit and individual bearing products serve other positions. Compare the removed bearing numbers and seal sizes with the wheel diagram instead of treating all rear-hub parts as one package.

Ordering questions

What should be recorded before cutting out the old spokes?

The spoke guidance calls for photographing the inner-and-outer lacing pattern and measuring wheel offset before disassembly. Check that the hub and rim remain serviceable. Correct spoke count alone does not preserve the original wheel geometry; the rebuild still needs proper lacing, tensioning and truing.

Will the spoke sets fit any 19-inch front and 17-inch rear rims?

They are specified for the listed stock wheels. Verify hub, rim drilling and spoke requirements before using them with aftermarket rims or a different hub combination.

Is the rear seal sold individually?

Yes. The rear seal is one 34 × 55 × 9mm piece. Match the exact location and old seal dimensions before entering the repair quantity.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB650

Votre panier

×