2002 Honda CB900F 919 — Tubes, ressorts, joints et soufflets de fourche

The verified selection in this 2002 919 fork category is a 43 mm seal driver. Check the fork actually fitted before ordering the tool, particularly after a front-end conversion, and prepare a separate list of the seals and other service parts needed.

Préciser la sous-catégorie

Consultation en cours Tubes, ressorts, joints et soufflets de fourche

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

1994-07 Honda CB1000 / CB900F Fork Seal Driver ~ 43mm

$34.95 USD

Fork Seal Driver - 43mm for custom or restoration work on classic Honda CB motorcycles with 43mm forks. Fitment / Compatibility CB900F2 (2002) 919CB900F3...

Comparer

2002 Honda CB900F 919 · Fork Seal Tools Buying guide

Choose seals and instructions for the fitted fork

Honda lists the 2002–03 fork separately from the revised 2004 assembly. Use the early fork parts listing and service information; the shared 43 mm tool size does not make the later seals or internal parts interchangeable.

Parts to consider

1994-07 Honda CB1000 / CB900F Fork Seal Driver ~ 43mm

43 mm fork-seal driverInstallation tool listed for the 2002 919; oil seals and dust seals are not included.Voir la pièce

The driver does one job

The 43 mm driver is an installation tool intended to seat the seal squarely without striking its sealing lip directly. It does not include oil seals or dust seals. Clean, undamaged sealing surfaces and the correct service procedure still matter.

The early and revised forks need separate parts checks

Honda lists the 2002–03 fork separately from the revised 2004 assembly. Use the early fork parts listing and service information; the shared 43 mm tool size does not make the later seals or internal parts interchangeable. Obtain oil type, fill quantity and level from service information for the exact fork. A 43 mm tube diameter alone does not supply those specifications.

Practical questions

Are seals included, or is this just the driver?

It is the driver only. The product listing explicitly excludes oil seals and dust seals; select those parts separately for the original or replacement fork assembly.

Can I buy any 43 mm seal listed for a later 919?

No. Honda's catalogue separates the 2002–03 fork from the revised 2004 assembly and lists different seal sets. Match the exact fork application; the driver's 43 mm size is not proof that all 43 mm seals interchange.

Does a 43 mm driver tell me how much fork oil to add?

No. Oil quantity and level are separate service specifications. Use the correct manual for the fitted fork and follow its measuring conditions; do not copy a fill amount merely because another fork uses the same driver.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 2002 Honda CB900F 919

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces

Magasiner par catégorie

Pièces pour motos Honda

1994-07 Honda CB1000 / CB900F Fork Seal Driver ~ 43mm

Choose seals and instructions for the fitted fork

Parts to consider

The driver does one job

The early and revised forks need separate parts checks

Practical questions

Trouvez des pièces pour votre Honda

Votre panier

Connexion

2002 Honda CB900F 919 — Tubes, ressorts, joints et soufflets de fourche

~ Magasiner par catégorie~

Pièces pour motos Honda

1994-07 Honda CB1000 / CB900F Fork Seal Driver ~ 43mm

Parts to consider

The driver does one job

The early and revised forks need separate parts checks

Practical questions

Trouvez des pièces pour votre Honda

Votre panier

Magasiner par catégorie