VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB900C — Poignées

Choose the grip end treatment after checking the bar ends on your 1981 CB900C Custom. Both black replica styles are 130mm long for 7/8-inch handlebars. Open ends come with plugs, while closed ends use a different finish, so compare any existing weights or other bar-end equipment.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Poignées

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB type closed-end grips 53165-390-780

Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780

$16.95 USD
02-2422
Keep your classic Honda looking factory-correct with these Honda OEM-Type Rubber Grips. Faithful replicas of the original grips fitted at the factory, in black...
Honda CB type open-end grips 53165-390-780

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780

$19.95 USD
02-2481
Get factory-correct grip fit with the option to finish the bars your way, these Honda OEM-Type Rubber Grips are open-end replicas of the original...
Comparer

1981 Honda CB900C Custom · Open & Closed-End Grips Buying guide

Choose end treatment after measuring the grip space

The basic length and bar fit are shared by both choices. The difference is how the ends are finished, which matters when checking throttle clearance and the equipment fitted beyond the grips.

Parts to consider

Honda OEM Type Open-End Grips ~ Replaces 53165-390-780 Open-end replica gripsBlack 130mm grips for 7/8-inch handlebars; end plugs included.Voir la pièce Honda OEM Type Closed-End Grips ~ Replaces 53165-390-780 Closed-end replica gripsBlack 130mm rubber grips for 7/8-inch handlebars; closed-end design.Voir la pièce

Compare length and sleeve fit before fitting

The 130mm specification describes grip length, while 7/8-inch identifies the stated handlebar application. Compare the fitted bars and throttle sleeve before purchase. A changed control housing can affect the space available, even when the bar diameter is unchanged.

Retain appropriate clearance at the end

The open-end product supplies separate plugs; the closed-end style does not use that same end arrangement. Check the accessories and sleeve movement before installation. Follow the chosen grip’s fitting method rather than forcing a conflicting combination of grip end and bar hardware.

Buying questions

Will choosing an open end cure a binding throttle?

It may change outer-end clearance, but binding can also come from the throttle sleeve, housing or cable routing. Both grip styles are 130 mm long. Inspect those parts and verify free throttle return through the steering range after fitting.

Are the supplied end plugs mounting hardware for accessories?

The open-end grip set includes plugs for the grip ends. It does not include a verified mounting system for bar-end mirrors or weights. Select those accessories by their own fittings and check that they cannot obstruct the throttle.

Will an original-style look establish fit on custom controls?

No. Match the stated dimensions and check the actual throttle sleeve and housing. Changed controls need their own clearance and fit assessment before selecting the grips.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB900C

Votre panier

×