VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1994 Honda CB1000 — Freins et embrayage

The 1994 Honda CB1000 uses a hydraulic clutch, and most listings here serve it: a clutch master cylinder rebuild kit, a pushrod kit, a slave cylinder piston and the lever switch. A front brake master cylinder kit, pivot hardware and clutch plates complete it.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1000 CB900 master cylinder reservoir cap plastic o-ring 45521-MJ6-006

Honda CB Master Cylinder Reservoir Cap Plastic O-Ring ~ Replaces 45521-MJ6-006

$4.95 USD
29-0062
Replace your master cylinder cap O-ring with this Master Cylinder Reservoir Cap Plastic O-Ring, replacing OEM #45521-MJ6-006.Key Features• Master cylinder reservoir cap O-ring• Plastic•...
Épuisé
Honda CB1100 CB1000 handlebar brake lever pivot bolt and nut set 90114-MA5-671

Honda CB Handlebar Brake Lever Pivot Bolt & Nut Set ~ Replaces 90114-MA5-671

$9.95 USD
73-1031
Replace your brake lever pivot hardware with this Handlebar Brake Lever Pivot Bolt & Nut Set, used to fasten the brake lever in place....
Honda CB750SC CB700SC CB650SC clutch master cylinder kit 22886-MB0-305

Honda Clutch Master Cylinder Rebuild Kit ~ Replaces 22886-MB0-305

$29.95 USD
08-0207
Rebuild your Nighthawk's clutch master cylinder with this Clutch Master Cylinder Rebuild Kit, replacing OEM #22886-MB0-305. Fits the mid-'80s CB750SC and CB700SC Nighthawks, CB1000...
Honda CB750K CB1000 CB650 front master cylinder kit 45530-MA4-671

Honda CB Front Master Cylinder Rebuild Kit ~ Replaces 45530-MA4-671

$29.95 USD
08-0201
Rebuild your later-model CB's front master cylinder with this Front Master Cylinder Rebuild Kit, replacing OEM #45530-MA4-671. Fits the CB750K (1981-82), CB1000, CB900F (2002-07),...
Magura universal front master cylinder assembly 16mm

Magura Universal Front Master Cylinder Assembly ~ 16mm

$259.00 USD
08-0251
Step up to dual-disk compatibility with this Magura Universal Front Brake Master Cylinder, featuring a 16mm piston diameter recommended for dual-disk brake systems. Threaded...
Nouveau
Honda CB1000 clutch slave cylinder piston 22863-MJ8-003

1994-95 Honda CB1000 Clutch Slave Cylinder Piston ~ Replaces 22863-MJ8-003

$28.22 USD
29-0078
Restore smooth clutch operation with this Clutch Slave Cylinder Piston, designed as a direct replacement for worn or damaged original components. This piston replaces...
Honda CB1000 CB650 CB550 CB77 CB72 steel clutch plate 22321-MT3-000

Honda CB Steel Clutch Plate ~ Replaces 22321-MT3-000

$10.95 USD
39-1241
Replace your CB1000, CB650SC, CB550, or CB72/CB77 steel clutch plate with this Steel Clutch Drive Plate, replacing OEM #22321-MT3-000.Order the number of pieces required...
Honda CB1000 CB500 CB450 CL450K0 clutch friction plate 22201-MA7-000

Honda CB Clutch Friction Plate ~ Replaces 22201-MA7-000

$8.95 USD
39-1046
Replace your clutch friction plates with this Clutch Friction Plate, replacing OEM #22201-MA7-000 / #22201-283-000.Order the number of pieces required for your model.Key Features•...
Nouveau
Honda CB1000 CB700 CB650 CB550 clutch lever switch 35330-MB0-003

Honda CB1000 / CB700 / CB650 / CB550 Clutch Lever Switch ~ Replaces 35330-MB0-003

$16.38 USD
29-0085
Replace your clutch lever switch with this Clutch Lever Switch, replacing OEM #35330-MB0-003.Key Features• Clutch lever switch• Replaces OEM #35330-MB0-003• Honda part name: Switch...
Honda CB750SC CB700SC CB650SC clutch master cylinder pushrod kit 22884-MB0-006

Honda Nighthawk Clutch Master Cylinder Pushrod Kit

$13.95 USD
08-0301
Rebuild your Nighthawk's clutch master cylinder pushrod with this Clutch Master Cylinder Pushrod Kit. Includes the pushrod (OEM #22884-MB0-006) and bushing (OEM #22885-MB0-006), two...
Comparer

1994 Honda CB1000 · Brake & Clutch Buying guide

Two hydraulic systems up front

Both handlebar levers on this bike push fluid rather than pull a cable. Seals in either master cylinder age the same way, so a soft lever on either side calls for a rebuild.

Brake and clutch parts to consider

Honda Clutch Master Cylinder Rebuild Kit ~ Replaces 22886-MB0-305 Clutch master cylinder kitRebuilds the clutch master cylinder; fitment covers the 1994-95 CB1000 and several Nighthawks.Voir la pièce 1994-95 Honda CB1000 Clutch Slave Cylinder Piston ~ Replaces 22863-MJ8-003 Clutch slave cylinder pistonTitled for the 1994-95 CB1000 and sold as a direct replacement for the original.Voir la pièce Honda CB Front Master Cylinder Rebuild Kit ~ Replaces 45530-MA4-671 Front brake master cylinder kitRebuilds the handlebar brake master cylinder on later CB models, this one included.Voir la pièce

Pièces connexes : Clutch pushrod and bushing kit · Steel clutch plate · Brake lever pivot bolt and nut

Service the whole clutch circuit

A slave piston that sticks or a master cylinder seal that leaks both show up as drag or a low engagement point. The master kit, pushrod kit and slave piston are all listed, so the full hydraulic path can be refreshed in one weekend.

Plates and fluid

Hydraulic clutches hide plate wear behind self-adjustment, so slipping under load usually means worn plates rather than poor adjustment. Steel plates and one friction plate are listed. Bleed with fresh fluid of the grade marked on the reservoir cap.

Brake and clutch questions

Is the clutch cable operated?

No. The listings describe a hydraulic clutch, with a master cylinder kit, a pushrod kit and a slave cylinder piston all tagged to the 1994-95 CB1000. There is no clutch cable to adjust.

Are brake pads or caliper kits listed?

Not at the moment. Pads, caliper seals and pistons are not published for this model, so the front master cylinder kit is the only brake hydraulic part listed.

Does the Magura master cylinder list this bike?

No. The 16mm Magura unit is universal and its listing carries no CB1000 fitment. It also needs its banjo bolt, washers and brake switch bought separately, so it is not featured.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1994 Honda CB1000

Votre panier

×