VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1984 Honda CB750SC — Jantes, rayons, joints de roue et valves

The front wheel choices for the 1984 Honda CB750SC separate bearing replacement from seal replacement. Identify the fitted wheel and compare its removed parts. Keep the two-bearings-per-wheel requirement distinct from the two seals supplied in the separate seal kit.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Jantes, rayons, joints de roue et valves

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 CB900 CB750 CB650 6302-2RS front wheel bearing

Honda CB 6302-2RS Front Wheel Bearing

$14.95 USD
28-6302
Replace your front wheel bearing with this 6302-2RS Front Wheel Bearing with 2 synthetic shields. High quality, made in Japan.2 used per front, order...
Honda CB1100 CB1000 CB750 CB700 CB650 front wheel seal kit

Honda CB Front Wheel Seal Kit

$8.19 USD
27-9019
Replace your Nighthawk or big-bore DOHC front wheel seals with this Front Wheel Seal Kit of 2 pieces. Made in Japan by OEM supplier.Key...
Comparer

1984 Honda CB750SC · Front Wheel Bearings & Seals Buying guide

Build the wheel order with the right quantities

The bearing is specified as 6302-2RS with two synthetic shields, and two are used per front wheel. The seal product is a separate two-piece kit with its own listed application.

Parts to consider

Honda CB 6302-2RS Front Wheel Bearing 6302-2RS front wheel bearingJapanese-made 6302-2RS bearing with two synthetic shields. Two bearings are specified per front wheel.Voir la pièce Honda CB Front Wheel Seal Kit Front wheel seal kitTwo-piece front wheel seal kit, made in Japan, for the CB750SC application.Voir la pièce

Match the wheel as well as the motorcycle

The bearing and seal applications include this CB750SC year. A changed wheel still needs its own match, so check the wheel identity, removed bearing designation and seals. Do not carry the original application across an axle or wheel conversion without verifying those components.

Keep the package counts clear

The seal kit contains two pieces. Two bearings are used per front wheel, with the bearings ordered separately. Plan the order with those two different quantities in mind, and verify the current supply unit if buying a full set.

Buying questions

Does one seal kit include the bearings?

No combined bearing-and-seal package is described. The seal kit has two pieces, while the 6302-2RS bearings are listed separately with a two-per-front-wheel requirement.

Can I use this as a rear wheel bearing?

This product is listed as a front wheel bearing for the application. Do not infer rear-wheel suitability from the shared motorcycle model or from a visually similar bearing.

What should I check after a wheel swap?

Identify the fitted wheel and its bearing and seal specifications. The motorcycle’s model-year filter alone cannot establish compatibility with a wheel or axle assembly installed from another source.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1984 Honda CB750SC

Votre panier

×