VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1984 Honda CB750SC — Électricité

Electrical work on the 1984 Honda CB750SC begins with identifying the circuit and the parts fitted to the bike. Starter brushes and the starter-circuit diode serve different faults. Performance-coil options also require a separate resistance and mounting check.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Électricité

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1000 CB900 CB750 CB700 spark plug cap SD05F

Honda CB750 Spark Plug Cap – SD05F

$10.49 USD
23-3115
Replace your spark plug caps with this Spark Plug Cap, SD05F type. Two required per CB750.Key Features• Spark plug cap, SD05F• 2 required per...
Honda CB1100 CB1000 CB900 CB750 CB450 alternator rotor puller

Honda CB Alternator Rotor Puller

$12.95 USD
35-0035
Pull your DOHC CB alternator rotor with this Alternator Rotor Puller, 18mm x M1.5 right-hand thread, for internal-thread rotors and flywheels.Key Features• Alternator rotor...
Honda CB1100 CB1000 CB900 CB750 starter clutch diode 31700-124-003

Honda CB Starter Clutch Diode ~ Replaces 31700-124-003

$12.88 USD
24-2044
Replace your starter clutch diode with this Stator Clutch Diode/Rectifier, replacing OEM #31700-124-003 / #31700-166-008. Exceptionally broad fitment across the SOHC and DOHC CB750...
Honda CB1100 CB1000 CB900 CB750 starter motor brush set 31201-292-158

Honda CB Starter Motor Brush Set ~ Replaces 31201-292-158

$29.95 USD
24-2021
Replace your Mitsuba 2-brush starter motor brushes with this Replacement Starter Brush Set of 2, 12mm x 14mm x 6mm, 1 piece with insulated...
Dynatek 3 ohm ignition coil set 2 with plug wires Honda CB

Dynatek Performance 3 Ohm Ignition Coil Set/2 with Plug Wires

$389.00 USD
07-9974
Combine Dynatek's performance coils with matching plug wires in one package using this Dynatek Performance Dual-Output 3 Ohm Ignition Coil Set of 2 with...
Honda CB1100 CB1000 CB900 CB750 replacement coil tower boots

Honda CB1100 / CB1000 / CB900 / CB750 Replacement Coil Tower Boots

$4.95 USD
17-6830
Replace the tower boots on your performance coils with this Coil Tower Boots 2-pack. Fits performance coils #17-6810, #07-9973, #07-9979, and #07-9980.Key Features• Coil...
Dynatek 3 ohm ignition coil set 2 Honda CB

Dynatek Performance 3 Ohm Ignition Coil Set/2

$289.00 USD
07-9980
Match your Dyna-style electronic ignition requirement with this Dynatek Performance Dual-Output 3 Ohm Ignition Coil Set of 2. Same Dynatek quality as the 5...
Comparer

1984 Honda CB750SC · Electrical Buying guide

Identify the circuit before choosing parts

Start with the existing starter, connector or ignition equipment. Model-listed service pieces and conditional performance-coil options share this category, but they should not be treated as one interchangeable electrical repair package.

Parts to consider

Honda CB Starter Motor Brush Set ~ Replaces 31201-292-158 Mitsuba starter brush setTwo brushes, 12 × 14 × 6mm, for Mitsuba two-brush starters: one insulated lead and one non-insulated lead.Voir la pièce Honda CB Starter Clutch Diode ~ Replaces 31700-124-003 Starter-circuit diodeReplacement diode using references 31700-124-003 and 31700-166-008; verify the fitted connector.Voir la pièce Dynatek Performance 3 Ohm Ignition Coil Set/2 Dynatek 3-ohm coil pairTwo dual-output 3-ohm coils with hardware and instructions. Confirm the ignition requirement and mounting before choosing them.Voir la pièce

Pièces connexes : Alternator rotor puller · Performance-coil tower boots

Service the starter by its actual construction

The brush set contains two differently terminated brushes for a Mitsuba two-brush starter. Compare the motor identity, brush dimensions and lead arrangement. A changed starter needs its own check even where the motorcycle’s model appears in the product application.

Coil resistance is a selection requirement

The Dynatek pair has a 3-ohm primary resistance. It is a conditional performance option, not proof that every fitted ignition can use it. Confirm the ignition manufacturer’s requirement and mounting space before ordering; never choose a lower resistance than that system permits.

Buying questions

Are both starter brushes the same?

The supplied set contains one brush with an insulated lead and one with a non-insulated lead. Both measure 12 × 14 × 6mm; compare their positions with the motor being serviced.

How do I choose the diode for a modified loom?

Compare references 31700-124-003 and 31700-166-008 with the fitted component, then verify its connector and circuit using the motorcycle’s wiring information. An altered loom needs that functional check as well as a matching housing.

Can I assume the coil pair works with my ignition?

No. The pair is rated at 3 ohms, and the product requires checking the ignition system’s resistance specification. Mounting, wiring and any previous ignition changes also need to be matched.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1984 Honda CB750SC

Votre panier

×