VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1983 Honda CB750SC — Flotteurs et composants de carburateur

Choose a small carburetor component by its location on the 1983 CB750SC rack. Floats, pump diaphragms and shaft seals do different jobs. Confirm the carburetor identification and inspect the affected assembly before choosing a package or counting replacement pieces for all four carburetors.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 CB750 carb pump diaphragm 16021-679-005

1979-83 Honda CB900 / CB750 Carb Pump Diaphragm ~ Replaces 16021-679-005

$27.95 USD
20-9042
Rebuild your DOHC CB750's Keihin carb accelerator pump with this Carb Pump Diaphragm, replacing OEM #16021-679-005. Kit contains 1 diaphragm with rod and 1...
Honda CB1100 CB1000 CB900 CB750 CB650 carb float 16013-413-851

Honda CB Carb Float ~ Replaces 16013-413-851

$27.95 USD
20-6507
Replace your 1980+ DOHC CB carb float with this Carb Float with Pin, replacing OEM #16013-413-851. Broad fitment across the 1980-82 CB750 family, CB750SC...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB900 CB750 CB650 CB450 CB400 air cut off valve 16048-429-771

Honda CB Air Cut Off Valve ~ Replaces 16048-429-771

$26.95 USD
20-4020
Replace your DOHC CB's carb air cut-off valve with this Carb Air Cut-Off Valve, replacing OEM #16048-429-771 (diaphragm) and #16048-425-771 (spring + 1 O-ring).Key...
Honda CB1100 CB1000 CB900 CB750 float bowl screws pk 2 93892-04016-00

Honda CB Float Bowl Screws Pk/2 ~ Replaces 93892-04016-00

$2.50 USD
48-9031
Replace your float bowl screws with this Float Bowl Screws Pack of 2 (with lock washers), 2 screws and 2 washers per pack. These...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB1100 CB1000 CB900 carb felt throttle and choke shaft seal set 12

Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12

$32.95 USD
33-0044
Replace worn or missing felt throttle and choke shaft seals during carburetor service on compatible vintage Honda CB models. These felt seals are used...
Honda CB1100 CB1000 CB900 CB750 CB650 carburetor cap screw set 8

Honda CB Carburetor Cap Screw Set/8

$5.80 USD
73-0100
Refresh your DOHC carb cap screws with this Carburetor Cap Screw Set of 8 with metal washers.Key Features• Carburetor cap screw set, 8 pieces•...
Honda CB1100 CB1000 Keihin pd carb felt throttle shaft seal set 6

Honda CB Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$18.95 USD
33-0043
Replace worn or missing felt throttle shaft seals on Keihin PD carburetors. These felt seals are used during carburetor service or restoration to help...
Honda CB900 CB750 CB650 air cut off valve with cover 16048-429-771

Honda CB Air Cut Off Valve With Cover ~ Replaces 16048-429-771

$34.95 USD
48-9029
Replace your carb air cut-off valve with this Carb Air Cut-Off Valve with Cover. Replaces OEM #16048-429-771 (diaphragm), #16048-425-771 (spring + 1 O-ring), and...
Comparer

1983 Honda CB750SC · Carb Floats & Diaphragms Buying guide

Locate the component before comparing package counts

The float includes its pin. The accelerator-pump package supplies a diaphragm with rod and bellows rubber. The separate felt set contains 12 shaft seals; it should not be confused with rubber O-rings for other joints.

Parts to consider

1979-83 Honda CB900 / CB750 Carb Pump Diaphragm ~ Replaces 16021-679-005 Accelerator pump diaphragmOne diaphragm with rod and one bellows rubber for the Keihin accelerator pump.Voir la pièce Honda CB Carb Float ~ Replaces 16013-413-851 Carb float with pinReplacement float supplied with pin. Four floats are used per motorcycle.Voir la pièce Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12 Felt shaft seal setSet of 12 throttle and choke shaft felt seals for the specified compatible carburetors.Voir la pièce

Check the float system one position at a time

Four floats are used per motorcycle, and the replacement float includes its pin. Inspect each float and needle rather than ordering a whole rack’s parts by assumption. Confirm the product’s supplied quantity when planning several replacements, and use the correct carburetor service procedure.

Match diaphragm and shaft-seal repairs

The accelerator-pump package has one diaphragm with rod and one bellows rubber. The felt seal set is a different 12-piece product for compatible throttle and choke shaft locations. Select by the actual assembly and seal function before comparing package quantities.

Carb Floats & Diaphragms questions

Is the float needle included with the float?

The stated float contents include a pin. A float needle is a separate item, so inspect both components and check the exact contents before ordering parts for that carburetor.

What comes with the pump diaphragm?

One diaphragm with rod and one bellows rubber are supplied for the accelerator pump. Identify that assembly and inspect the retained parts before selecting the package.

What should I identify before ordering shaft seals?

Confirm the carburetor family and the actual shaft-seal locations. The featured felt set contains twelve pieces for its specified application, so compare that scope with the rack being serviced.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1983 Honda CB750SC

Votre panier

×