Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Leviers de frein et d’embrayage, câbles d’embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Clutch Cable Adjuster ~ 8 x 23mm

$3.58 USD
08-0067
Dial in your clutch cable with this Gold-Anodized Cable Adjuster, 8 x 23mm, for the clutch cable at the lever. Fits an exceptionally broad...

1979-83 Honda CB900 / CB750 Clutch Cable ~ Replaces 22870-425-010

$24.95 USD
51-2209
Replace your DOHC CB clutch cable with this Clutch Cable, replacing OEM #22870-425-010 / #22870-ME1-670.Key Features• Clutch cable• Replaces OEM #22870-425-010 / #22870-ME1-670• Honda...
Épuisé
Honda CB750 CB900 CB1100 CB650 black hand lever 53175-MA5-671

Honda CB Black Hand Lever ~ Replaces 53175-MA5-671

$9.95 USD
08-0085
Choose a blacked-out alternative to the chrome 07-9995 brake lever with this Black Brake Lever. Replaces OEM #53175-MA5-671 / #53175-MA6-016 with the same broad...

Honda CB Clutch Lever Brake Light Switch ~ Replaces 35330-413-003

$15.95 USD
29-7029
Replace your front clutch lever safety stop switch with this Clutch Lever Stop Switch, replacing OEM #35330-413-003. This is the switch that allows the...
Épuisé
Honda CB1100 CB1000 handlebar brake lever pivot bolt and nut set 90114-MA5-671

Honda CB Handlebar Brake Lever Pivot Bolt & Nut Set ~ Replaces 90114-MA5-671

$9.95 USD
73-1031
Replace your brake lever pivot hardware with this Handlebar Brake Lever Pivot Bolt & Nut Set, used to fasten the brake lever in place....
Nouveau
Honda CB1000 CB900 CB750 CB650 clutch adjuster bolt 22841-425-000

Honda CB1000 / CB900 / CB750 / CB650 Clutch Adjuster Bolt ~ Replaces 22841-425-000

$8.35 USD
29-7033
Replace your clutch adjuster bolt with this Clutch Adjuster Bolt, replacing OEM #22841-425-000.Key Features• Clutch adjuster bolt• Replaces OEM #22841-425-000• Honda part name: Bolt,...
Épuisé
Honda CB750SC CB1100F CB650SC black clutch lever 53178-MA6-000

Honda CB Black Clutch Lever ~ Replaces 53178-MA6-000

$9.95 USD
08-0165
Fit your Nighthawk, CB1100F, or CB650SC with this Black Clutch Lever, replacing OEM #53178-MA6-000. Features a 10mm bolt hole for correct mounting on these...

Honda CB Chrome Brake Lever ~ Replaces 53175-MA5-671

$18.95 USD
07-9995
Run a chrome brake lever on your later-model CB with this Chrome Brake Lever, a direct replacement for OEM #53175-MA5-671 / #53175-MA6-016. Fits a...

1983 Honda CB750SC · Levers & Clutch Cable Buying guide

Match the controls on the motorcycle today

The left lever and clutch cable should fit their existing perch and route. The brake lever must be selected for the fitted master cylinder, not simply because it is black or shares the motorcycle’s year.

Inspect the left control as one assembly

The black clutch lever specifies a 10mm mounting hole and reference 53178-MA6-000. Check the perch and pivot as well as the cable attachment. A lever that resembles the old part may still have different dimensions if mixed controls were fitted during previous repairs.

Keep cable and brake-lever checks separate

The clutch cable replaces the early Nighthawk references, including 22870-ME1-670. Verify its route for any bar changes. On the right side, select the brake lever for the actual master cylinder; an aftermarket unit can require its own dedicated lever.

Levers & Clutch Cable questions

What dimension is specified for the clutch lever?

The mounting hole is 10mm. Compare the perch, pivot and cable end attachment before choosing it, especially if the left control assembly is no longer original.

Does the clutch cable suit a relocated handlebar?

Confirm the new routing and required reach first. The original motorcycle application cannot establish suitable cable bends or clearance after changing bars, risers or controls.

Are original and aftermarket brake levers interchangeable?

Identify the fitted master-cylinder assembly and select its specified lever. A dedicated aftermarket lever may differ from the original-type replacement, so compare the actual control before placing the order.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×