VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1982 Honda CB750SC — Flotteurs et composants de carburateur

An overflowing bowl, worn pump diaphragm and damaged shaft seals call for different parts on the 1982 CB750SC. Identify the carburetor and affected assembly before ordering. The selection separates floats with pins, an accelerator-pump diaphragm package and compatible felt throttle/choke shaft seals.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 carb fuel connector tube and accelerator tube

Honda CB Carb Fuel Connector Tube and Accelerator Tube O-Rings

$15.26 USD
73-0831
Replace your carb fuel and accelerator tube O-rings with these Carburetor Fuel Connector Tube and Accelerator Tube O-Rings, 12 O-rings.Key Features• Carb fuel connector...
Honda CB900 CB750 carb pump diaphragm 16021-679-005

1979-83 Honda CB900 / CB750 Carb Pump Diaphragm ~ Replaces 16021-679-005

$27.95 USD
20-9042
Rebuild your DOHC CB750's Keihin carb accelerator pump with this Carb Pump Diaphragm, replacing OEM #16021-679-005. Kit contains 1 diaphragm with rod and 1...
Honda CB1100 CB1000 CB900 CB750 CB650 carb float 16013-413-851

Honda CB Carb Float ~ Replaces 16013-413-851

$27.95 USD
20-6507
Replace your 1980+ DOHC CB carb float with this Carb Float with Pin, replacing OEM #16013-413-851. Broad fitment across the 1980-82 CB750 family, CB750SC...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB900 CB750 CB650 CB450 CB400 air cut off valve 16048-429-771

Honda CB Air Cut Off Valve ~ Replaces 16048-429-771

$26.95 USD
20-4020
Replace your DOHC CB's carb air cut-off valve with this Carb Air Cut-Off Valve, replacing OEM #16048-429-771 (diaphragm) and #16048-425-771 (spring + 1 O-ring).Key...
Honda CB1100 CB1000 CB900 CB750 float bowl screws pk 2 93892-04016-00

Honda CB Float Bowl Screws Pk/2 ~ Replaces 93892-04016-00

$2.50 USD
48-9031
Replace your float bowl screws with this Float Bowl Screws Pack of 2 (with lock washers), 2 screws and 2 washers per pack. These...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB1100 CB1000 CB900 carb felt throttle and choke shaft seal set 12

Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12

$32.95 USD
33-0044
Replace worn or missing felt throttle and choke shaft seals during carburetor service on compatible vintage Honda CB models. These felt seals are used...
Honda CB1100 CB1000 CB900 CB750 CB650 carburetor cap screw set 8

Honda CB Carburetor Cap Screw Set/8

$5.80 USD
73-0100
Refresh your DOHC carb cap screws with this Carburetor Cap Screw Set of 8 with metal washers.Key Features• Carburetor cap screw set, 8 pieces•...
Honda CB1100 CB1000 Keihin pd carb felt throttle shaft seal set 6

Honda CB Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$18.95 USD
33-0043
Replace worn or missing felt throttle shaft seals on Keihin PD carburetors. These felt seals are used during carburetor service or restoration to help...
Honda CB900 CB750 CB650 air cut off valve with cover 16048-429-771

Honda CB Air Cut Off Valve With Cover ~ Replaces 16048-429-771

$34.95 USD
48-9029
Replace your carb air cut-off valve with this Carb Air Cut-Off Valve with Cover. Replaces OEM #16048-429-771 (diaphragm), #16048-425-771 (spring + 1 O-ring), and...
Comparer

1982 Honda CB750SC · Carb Floats & Seals Buying guide

Match each small part to its carburetor job

The float is supplied with a pin, the accelerator-pump kit contains a diaphragm with rod and bellows rubber, and the felt-seal package contains 12 pieces. Do not combine those counts into a presumed full rebuild kit.

Parts to consider

Honda CB Carb Float ~ Replaces 16013-413-851 Carb float with pinReplacement float supplied with pin. Four floats are used per motorcycle.Voir la pièce 1979-83 Honda CB900 / CB750 Carb Pump Diaphragm ~ Replaces 16021-679-005 Accelerator pump diaphragmOne diaphragm with rod and one bellows rubber for the Keihin accelerator pump.Voir la pièce Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12 Felt shaft seal setSet of 12 throttle and choke shaft felt seals for the specified compatible carburetors.Voir la pièce

Pièces connexes : Connector tube O-rings

Check what is attached to the float

The replacement float includes its pin. Four floats are used per motorcycle, but the product does not describe a four-float package. Inspect each float and needle position, and confirm the supplied quantity when placing an order for the whole carburetor bank.

Choose the correct seal family

The featured shaft-seal set contains 12 felt pieces for the specified compatible carburetors. The 1982-specific related tube O-ring pack supplies 12 O-rings for fuel and accelerator connectors. Keep those seals distinct from each other and from parts advertised for a different carburetor family.

Carb Floats & Seals questions

Does the float come with a needle?

The product describes a float with pin. The float needle is a separate product, so inspect both components and confirm exactly which replacements are needed for each carburetor.

What does the pump diaphragm kit contain?

It contains one diaphragm with rod and one bellows rubber. This package serves the accelerator pump rather than the float bowl or air cut-off valve, which have separate components.

Are all twelve-piece carb seal sets the same?

No. The felt shaft-seal set and the fuel/accelerator tube O-ring pack serve different locations. Identify the carburetor family and the sealing position before choosing a package.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1982 Honda CB750SC

Votre panier

×