VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1984 Honda CB700SC — Disques et ressorts d’embrayage

Internal clutch work on the 1984 CB700SC uses distinct friction plates, steel plates and springs. The requirements are six friction plates and five steel plates per motorcycle. Compare the parts removed from the engine, then select replacements for the actual wear found.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Disques et ressorts d’embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB700 CB500 CB450 CL450K0 steel clutch plate 22321-MG8-000

Honda CB Steel Clutch Plate ~ Replaces 22321-MG8-000

$11.95 USD
39-1409
Replace your SOHC CB750, CB700SC Nighthawk, CB500T, or CB450/CL450 steel clutch plate with this Steel Clutch Drive Plate, replacing OEM #22321-MG8-000 / #22321-283-000.Order the...
Honda CB900C CB900F CB700SC performance clutch spring kit

1980-86 Honda CB900C / CB900F / CB700SC Performance Clutch Spring Kit

$34.95 USD
39-1502
Upgrade your CB700SC or CB900 clutch springs with this High Performance Clutch Spring Kit of 6 springs. Made in Japan.Key Features• High-performance clutch spring...
Honda CB700SC clutch friction plate 22201-MM5-000

1984-86 Honda CB700SC Clutch Friction Plate ~ Replaces 22201-MM5-000

$12.95 USD
39-1124
Replace your CB700SC Nighthawk clutch friction plate with this Clutch Friction Plate for double-overhead-cam models, replacing OEM #22201-MM5-000.6 pieces required per bike.Key Features• Clutch...
Comparer

1984 Honda CB700SC · Clutch Plates & Springs Buying guide

Count the clutch stack before placing the order

For the 1984 CB700SC, the listed stack uses six friction plates and five steel plates, each sold singly. The spring kit contains six pieces, while Honda’s CB700SC assembly shows five spring positions. Keep those three counts separate when planning the job.

Parts to consider

1984-86 Honda CB700SC Clutch Friction Plate ~ Replaces 22201-MM5-000 CB700SC friction plateOne friction plate replacing 22201-MM5-000; six are required for the listed CB700SC stack.Voir la pièce Honda CB Steel Clutch Plate ~ Replaces 22321-MG8-000 Steel clutch plateOne steel plate per purchase; five are required for the CB700SC stack.Voir la pièce 1980-86 Honda CB900C / CB900F / CB700SC Performance Clutch Spring Kit Six-spring clutch kitSix springs supplied, made in Japan. Honda’s CB700SC assembly has five installed spring positions.Voir la pièce

Match the plate type, count and condition

The friction and steel products are individual plates, not complete clutch packs. Honda’s assembly alternates six friction discs with five steel plates. Inspect the existing stack and basket before ordering, and preserve the manual’s plate sequence. A matching OEM reference alone does not establish a different-market CB750SC application.

Diagnose release problems before buying springs

Honda lists hydraulic air, low fluid, leaks, sticking parts and warped plates as causes of poor release or creeping. Stronger-spring claims do not establish the cause of those symptoms. The kit has no published spring-rate value in the reviewed record; use the correct CB700SC assembly layout and service checks.

Buying questions

Does a complete plate replacement mean ordering one of each product?

No. Each friction plate and each steel plate is sold singly. The listed CB700SC requirement is six friction plates and five steel plates, so order those quantities only when replacing the full stack.

Why are six springs supplied if the CB700SC clutch uses five?

Six is the product’s package quantity. Honda’s CB700SC disassembly and assembly drawings show five spring positions. Do not add a sixth spring or transfer another model’s spring count; follow the CB700SC layout.

Will a spring kit fix a clutch that will not release fully?

Not necessarily. On this hydraulic-clutch model, Honda’s checks include air, low fluid, leaks and sticking hydraulics as well as warped plates. Establish the cause before ordering an internal spring or plate repair.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1984 Honda CB700SC

Votre panier

×