Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1984 Honda CB700SC · Workshop Tools & Accessories Buying guide
A tool’s size and function matter more than a general Honda label. Identify the plug hex, filter design or fork size, then select the appropriate tool for that planned service job.
Thin-wall 18 mm plug wrench160 mm overall length with a handle that tucks into the socket; intended for 18 mm spark-plug hexes.Voir la pièce
Tripod oil-filter wrench3/8-inch drive tripod wrench for the specified aftermarket spin-on filters.Voir la pièce
Split 39 mm fork-seal driverCarbon-steel split driver for 39 mm fork-seal installation; listed for CB700SC forks.Voir la pièce
The 18 mm plug wrench is 160 mm long with a tuck-away handle. The tripod oil-filter wrench uses a 3/8-inch drive and is intended for the specified aftermarket spin-on filters. Inspect working clearance so the correct-size tool can also reach the fitted component.
The split 39 mm fork driver is separate from the oil-seal and dust-seal pairs. The original CB700SC forks are air-assisted and have different right/left filling requirements, so gather the correct manual and service parts along with the tool. The spark-plug and filter wrenches likewise do not supply replacement plugs or filters.
No. It addresses seal installation. Honda’s air-assisted fork preparation, spring-loaded cap precautions and separate left/right filling requirements still apply; plan those steps and the replacement seals before starting.
Its stated use is the specified aftermarket spin-on filters. Compare the installed filter and available clearance; a general Honda application does not establish every filter arrangement.
Its handle is not calibrated. The 18 mm measurement describes the spark-plug hex, and the tool is 160 mm overall. Use the correct plug specification and an appropriate torque tool when tightening to Honda’s specified value.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.