Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB Carb Fuel Connector Tube and Accelerator Tube O-Rings

$15.26 USD
73-0831
Replace your carb fuel and accelerator tube O-rings with these Carburetor Fuel Connector Tube and Accelerator Tube O-Rings, 12 O-rings.Key Features• Carb fuel connector...

1979-83 Honda CB900 / CB750 Carb Pump Diaphragm ~ Replaces 16021-679-005

$27.95 USD
20-9042
Rebuild your DOHC CB750's Keihin carb accelerator pump with this Carb Pump Diaphragm, replacing OEM #16021-679-005. Kit contains 1 diaphragm with rod and 1...

Honda CB Float Bowl Drain Screw O-Rings Pk/4

$5.80 USD
48-0792
Replace your float bowl drain screw O-rings with this Float Bowl Drain Screw O-Rings 4-Pack.Key Features• Float bowl drain screw O-rings• 4 per packFitment...

Honda CB1100 / CB1000 / CB900 / CB750 DOHC Screw Set

$39.95 USD
73-0099
Refresh DOHC carb hardware top to bottom with this 71-Piece DOHC Screw Set. Includes front stay plate screws (8), CV cap screws (8), throttle...

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...

Honda CB1000 / CB900 / CB750 Carb Rubber Passage Plugs Pk/5 ~ Replaces 16010-425-671

$10.49 USD
48-5001
Replace your float bowl and cover access plugs with this Carb Rubber Passage Plugs Pack of 5. Fits in float bowl and cover access...

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...

Honda CB Float Bowl Screws Pk/2 ~ Replaces 93892-04016-00

$2.50 USD
48-9031
Replace your float bowl screws with this Float Bowl Screws Pack of 2 (with lock washers), 2 screws and 2 washers per pack. These...

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...

Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12

$32.95 USD
33-0044
Replace worn or missing felt throttle and choke shaft seals during carburetor service on compatible vintage Honda CB models. These felt seals are used...

1979 Honda CB750 / CB650 Air Cut Off Valve ~ Replaces 16048-425-671

$24.95 USD
20-4021
Replace your 1979 DOHC CB's carb air cut-off valve with this Carb Air Cutoff Valve, replacing OEM #16048-425-671 (diaphragm) and #16048-425-305 (spring + 1...

1978-79 Honda CB750 / CB400 Carb Float ~ Replaces 16013-679-005

$29.95 USD
20-6506
Replace your 1979 DOHC CB750 or CB400 carb float with this Carb Float with Pin, replacing OEM #16013-679-005.4 carb floats are used per bike,...

1979-82 Honda CB750 Carb Bolt Kit

$27.03 USD
73-1044
Restore your carburetor hardware with this Carburetor Bolt and Washer 43-Piece Kit, a complete bolt kit for all 4 carburetors.Key Features• Carburetor bolt and...

Honda CB Carburetor Cap Screw Set/8

$5.80 USD
73-0100
Refresh your DOHC carb cap screws with this Carburetor Cap Screw Set of 8 with metal washers.Key Features• Carburetor cap screw set, 8 pieces•...

Honda CB Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$18.95 USD
33-0043
Replace worn or missing felt throttle shaft seals on Keihin PD carburetors. These felt seals are used during carburetor service or restoration to help...

1979 Honda CB750F · Carb Floats & Components Buying guide

Identify the carburetor bank before choosing small parts

Float, accelerator-pump and air cut-off valve listings do not all share the same CB750F year range. Identify the fitted carburetors before ordering, then separate the pump repair from bowl-drain and interconnecting-tube seal work.

Keep the two O-ring packs tied to their locations

Pack 48-0792 supplies four float-bowl drain-screw O-rings. Set 73-0831 supplies twelve O-rings for carburetor fuel connector and accelerator tubes, with a 1979–82 CB750F application. Select by the joint being renewed; the twelve-piece count describes that tube-seal package.

Record the fitted carburetor identity

Keep the carburetor identification and replacement references with the parts list before ordering for a swapped bank. The frame year remains useful background, but it does not establish that the original carburetor components are still fitted.

Questions before ordering

What comes with the accelerator-pump diaphragm repair?

The 20-9042 kit supplies one diaphragm with rod and one bellows rubber. Check those supplied pieces before adding separate pump parts to the order; the kit’s contents can cover more than a diaphragm-only repair.

Which float and air cut-off valve options distinguish 1979 from later CB750F models?

For the CB750F, float 20-6506 and air cut-off valve 20-4021 list 1979. Later float 20-6507 replaces 16013-413-851 and lists 1980–82 F; later air cut-off valve 20-4020 lists the same later range, with diaphragm 16048-429-771 and spring/O-ring 16048-425-771. Choose from the fitted carburetor application rather than treating all DOHC F listings as one specification.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×