VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1980 Honda CB750C — Flotteurs et composants de carburateur

A float, accelerator-pump diaphragm and fuel-connector O-rings address different parts of the 1980 CB750C carburetor assembly. Identify the worn component before ordering a larger kit. Also compare the carbs actually installed, because replacement carburetor racks can change these applications.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB1000 carb fuel connector tube and accelerator tube

Honda CB Carb Fuel Connector Tube and Accelerator Tube O-Rings

$15.26 USD
73-0831
Replace your carb fuel and accelerator tube O-rings with these Carburetor Fuel Connector Tube and Accelerator Tube O-Rings, 12 O-rings.Key Features• Carb fuel connector...
Honda CB900 CB750 carb pump diaphragm 16021-679-005

1979-83 Honda CB900 / CB750 Carb Pump Diaphragm ~ Replaces 16021-679-005

$27.95 USD
20-9042
Rebuild your DOHC CB750's Keihin carb accelerator pump with this Carb Pump Diaphragm, replacing OEM #16021-679-005. Kit contains 1 diaphragm with rod and 1...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw o-rings pk 4

Honda CB Float Bowl Drain Screw O-Rings Pk/4

$5.80 USD
48-0792
Replace your float bowl drain screw O-rings with this Float Bowl Drain Screw O-Rings 4-Pack.Key Features• Float bowl drain screw O-rings• 4 per packFitment...
Honda CB1100 CB1000 CB900 CB750 DOHC screw set

Honda CB1100 / CB1000 / CB900 / CB750 DOHC Screw Set

$39.95 USD
73-0099
Refresh DOHC carb hardware top to bottom with this 71-Piece DOHC Screw Set. Includes front stay plate screws (8), CV cap screws (8), throttle...
Honda CB1100 CB1000 CB900 CB750 CB650 carb float 16013-413-851

Honda CB Carb Float ~ Replaces 16013-413-851

$27.95 USD
20-6507
Replace your 1980+ DOHC CB carb float with this Carb Float with Pin, replacing OEM #16013-413-851. Broad fitment across the 1980-82 CB750 family, CB750SC...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB1000 CB900 CB750 carb rubber passage plugs pk 5 16010-425-671

Honda CB1000 / CB900 / CB750 Carb Rubber Passage Plugs Pk/5 ~ Replaces 16010-425-671

$10.49 USD
48-5001
Replace your float bowl and cover access plugs with this Carb Rubber Passage Plugs Pack of 5. Fits in float bowl and cover access...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Honda CB900 CB750 CB650 CB450 CB400 air cut off valve 16048-429-771

Honda CB Air Cut Off Valve ~ Replaces 16048-429-771

$26.95 USD
20-4020
Replace your DOHC CB's carb air cut-off valve with this Carb Air Cut-Off Valve, replacing OEM #16048-429-771 (diaphragm) and #16048-425-771 (spring + 1 O-ring).Key...
Honda CB1100 CB1000 CB900 CB750 float bowl screws pk 2 93892-04016-00

Honda CB Float Bowl Screws Pk/2 ~ Replaces 93892-04016-00

$2.50 USD
48-9031
Replace your float bowl screws with this Float Bowl Screws Pack of 2 (with lock washers), 2 screws and 2 washers per pack. These...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB1100 CB1000 CB900 carb felt throttle and choke shaft seal set 12

Honda CB Carburetor Felt Throttle & Choke Shaft Seal Set/12

$32.95 USD
33-0044
Replace worn or missing felt throttle and choke shaft seals during carburetor service on compatible vintage Honda CB models. These felt seals are used...
Honda CB750C CB750F CB750K CB750L carb bolt kit

1979-82 Honda CB750 Carb Bolt Kit

$27.03 USD
73-1044
Restore your carburetor hardware with this Carburetor Bolt and Washer 43-Piece Kit, a complete bolt kit for all 4 carburetors.Key Features• Carburetor bolt and...
Honda CB1100 CB1000 CB900 CB750 CB650 carburetor cap screw set 8

Honda CB Carburetor Cap Screw Set/8

$5.80 USD
73-0100
Refresh your DOHC carb cap screws with this Carburetor Cap Screw Set of 8 with metal washers.Key Features• Carburetor cap screw set, 8 pieces•...
Honda CB1100 CB1000 Keihin pd carb felt throttle shaft seal set 6

Honda CB Keihin PD Carburetor Felt Throttle Shaft Seal Set/6

$18.95 USD
33-0043
Replace worn or missing felt throttle shaft seals on Keihin PD carburetors. These felt seals are used during carburetor service or restoration to help...
Honda CB900 CB750 CB650 air cut off valve with cover 16048-429-771

Honda CB Air Cut Off Valve With Cover ~ Replaces 16048-429-771

$34.95 USD
48-9029
Replace your carb air cut-off valve with this Carb Air Cut-Off Valve with Cover. Replaces OEM #16048-429-771 (diaphragm), #16048-425-771 (spring + 1 O-ring), and...
Comparer

1980 Honda CB750C · Carb Floats & Components Buying guide

Identify the float, pump or connector-tube repair

The float includes its pin, the accelerator-pump kit includes a diaphragm with rod and bellows rubber, and the connector O-ring pack contains twelve seals.

Parts to consider

Honda CB Carb Float ~ Replaces 16013-413-851 Carb float with pinFloat with pin; four floats are used across the carburetors on one motorcycle.Voir la pièce 1979-83 Honda CB900 / CB750 Carb Pump Diaphragm ~ Replaces 16021-679-005 Accelerator-pump diaphragmOne diaphragm with rod and one bellows rubber for the Keihin accelerator pump.Voir la pièce Honda CB Carb Fuel Connector Tube and Accelerator Tube O-Rings Carb connector O-ringsTwelve O-rings for the fuel connector and accelerator tubes.Voir la pièce

Float service and pump service differ

The float replaces 16013-413-851 and includes its pin. The accelerator-pump kit replaces 16021-679-005 and supplies a diaphragm with rod and a bellows rubber. Keep those component references with the parts removed from the fitted carburetors.

Inter-carb seals have their own pack

The twelve O-rings are for fuel connector and accelerator tubes. Keep their locations distinct from bowl gaskets and drain-screw O-rings. Compare the old parts and the service instructions before disassembling the rack or selecting quantities.

Carb Floats & Components questions

Is the float needle supplied with the float?

The float package specifies its pin. Float needle 48-5011 is offered separately, while rebuild kit 48-1402 includes a float needle with sealing parts. Choose the needle separately when needed rather than assuming it comes with the float.

What if the original carburetor's float level is outside specification?

For the U.S./Canadian 1980 CB750C's VB42A carburetors, Honda directs replacement of the float when the correctly measured level is outside specification. Have the measurement confirmed using the model's procedure before choosing the replacement.

What should be checked before ordering the accelerator-pump kit?

Honda calls for checking the pump diaphragm for cracks or brittleness and making sure the pump rod is not bent. These checks help identify whether the diaphragm-and-rod assembly needs replacement before ordering a broader carburetor kit.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1980 Honda CB750C

Votre panier

×