VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1962 Honda CB72 — Flotteurs et composants de carburateur

For a 1962 Honda CB72 bowl-drain repair, keep the removed screw and bowl identified together. The replacement covers CB72 1961–66 and is supplied individually with an O-ring. If the bowl has changed, compare its required thread and sealing arrangement separately.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Comparer

1962 Honda CB72 · Bowl Drain Screws Buying guide

Match the bowl connection and supplied seal

The screw and O-ring are supplied together. Use the fitted bowl to establish the required connection, rather than relying on head shape or on the carburetor body’s identification alone.

Parts to consider

Honda CB Stock Type Float Bowl Drain Screw Individual Drain Screw and O-RingOne stock-type bowl-drain screw with its O-ring. The specified application includes CB72 1961–66; numeric screw dimensions are not published.Voir la pièce

Compare the connection beyond the screw head

A similar slotted head does not establish the thread pitch, screw length or seal dimensions. Those measurements are absent from the description. When the original screw is missing or damaged beyond comparison, request the replacement specifications and identify the bowl before placing the order.

Keep a replacement bowl’s identity with the order

A bowl fitted during an earlier repair may need a different screw or sealing arrangement from the assembly suggested by the carburetor body. Record any bowl identification and the location of its seal. Use the appropriate service information for refitting rather than borrowing another carburetor’s tightening specification.

Buying questions

Can I buy just the O-ring from this product?

This product supplies the screw and O-ring together, with no separate seal option in its current variant. If only a seal is needed, confirm a suitable separate part and its dimensions before ordering an alternative.

What information helps when the old screw is missing?

Provide the carburetor and bowl identification and clear details of the drain opening and seal location. Ask for the replacement’s complete thread and length specifications; the product description does not give numeric dimensions to compare.

Can I rely on the carburetor body marking if its bowl was replaced?

Identify the bowl separately as well. Its drain connection and sealing arrangement determine the screw required. Compare the replacement bowl’s documented requirements with the screw rather than assuming the body marking identifies every fitted component.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×