VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1962 Honda CB72 — Alimentation en carburant

A 1962 Honda CB72 fuel-system order should start with the component that needs attention. This bowl-drain screw is specified for CB72 1961–66 and comes with an O-ring. Identify the fitted carburetor and bowl before choosing parts for the repair.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Universal motorcycle carburetor synchronizer vacuum gauge 2 carb synchronizer

Universal Motorcycle Carburetor Synchronizer Vacuum Gauge ~ 2 Carb Synchronizer

$54.95 USD
37-0003
Carburetor and throttle body synchronizer kit for bikes with 2 Carbs. Makes synching your carburetor setup fast and easy! For use with Honda, Kawasaki,...
Voir les détails
Comparer

1962 Honda CB72 · Fuel System Buying guide

Identify the repair before ordering fuel-system parts

The featured screw serves the float-bowl drain and includes its seal. Establish whether that is the repair needed, then check the fitted assembly, especially if the carburetors have been replaced.

Parts to consider

Honda CB Stock Type Float Bowl Drain Screw Bowl-Drain Screw with O-RingSold individually with an O-ring. Specified for CB72 1961–66; check a replacement carburetor or bowl against its own requirements.Voir la pièce

Keep the diagnosis separate from the order

Fuel around a bowl does not by itself identify a faulty drain screw. Have the leak traced and the affected component identified before ordering. If a different seal or internal part needs attention, select it from the fitted carburetor’s information rather than this screw’s application range.

Account for changed carburetors

The specified CB72 1961–66 range covers this model year. A replacement carburetor or bowl still needs its own match. Retain the removed screw and obtain the replacement’s thread, length and seal-position details where necessary; those measurements are not published in the product description.

Buying questions

What should I check if a previous owner changed the carburetors?

Identify the carburetor and bowl actually fitted, then compare their required screw and seal with the replacement. The motorcycle’s year does not establish compatibility with a changed assembly. Keep the removed screw available for comparison where possible.

Should I replace every drain screw during a repair?

Order for the positions that inspection identifies as needing replacement. Each unit contains one screw and its O-ring; there is no complete-motorcycle quantity specified. Check the remaining components before deciding whether the work needs additional parts.

Can this screw’s application guide my choice of other carburetor parts?

Select other components separately using the fitted carburetor’s identity and the part being repaired. The drain screw’s application does not establish which floats, valves or gaskets are required, particularly when a bowl or complete carburetor has changed.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×