VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB175K5 Super Sport — pièces de moto

Start suspension and wheel work with the assembly needing attention: shock mounting hardware, swingarm pivot, fork seals or rear-hub dampers. The 1971 Honda CB175K1 range offers separate service pieces and packages, so identify the fitted components before building the order.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Suspension et roues

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB1100 CB900 CB750 type shock absorber nut 90309-315-000

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000

$3.95 USD
49-0779
Replace your shock absorber nuts with this Shock Absorber Nut, a replica of the OEM type used when installing shocks. Replaces OEM #90309-315-000.Note: 2...
Universal chrome shrouded 290mm shock absorber set side detail

Universal Motorcycle Shorty Shock Absorber Set ~ Chrome Shrouded 290mm

$119.95 USD
06-3591
Drop the back end with a clean all-chrome look using this Custom Shorty Shock Absorber Set. Chrome body and shroud with chrome progressive-wound springs,...
Honda CB750 CB550 CB500 CB450 swingarm grease fitting nipple (pk 2) 96201-30001

Honda CB Swingarm Grease Fitting Nipple (Pk/2)

$7.95 USD
73-0941
Replace your swingarm grease fittings with this Grease Fitting Nipple A .45 Pk/2. These fittings are used with the swingarm. Replaces OEM #96201-30001.Key Features•...
Universal black shrouded 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Shrouded 290mm

$129.95 USD
06-3590
Get the shortened look with a bit more coverage using this Custom Shorty Shock Absorber Set featuring a black body and shroud with black...
Honda CB1100 CB1000 CB900 CB750 16mm clutch oil filter rotor lock nut 90231-KCS-651

Honda CB 16mm Clutch / Oil Filter Rotor Lock Nut ~ Genuine Honda 90231-KCS-651 ~ Replaces 90231-KCS-651

$10.95 USD
99-5383
This genuine Honda 16mm lock nut is used on compatible Honda CB clutch basket and oil filter rotor assemblies. It is a small hardware...
Épuisé
Universal black 290mm eye-to-eye shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black Eye-to-Eye 290mm

$139.95 USD
06-3592
Go shorter with a different mounting configuration using this Custom Shorty Shock Absorber Set. Black body and shroud with black progressive-wound springs, 290mm (11...
Honda CB450 CB400 CB350 CB200 swingarm dust seal cap 52144-356-005

Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005

$24.95 USD
99-5170
This genuine Honda swingarm dust seal cap fits at the swingarm pivot / rear fork area on select Honda CB models. It helps cover...
Nouveau
Honda CB200 CB175 rear wheel damper bushing set 4 41241-307-010

1971-76 Honda CB200 / CB175 Rear Wheel Damper Bushing Set/4 ~ Replaces Honda OEM 41241-307-010

$14.95 USD
28-6917
This aftermarket rear wheel damper bushing set replaces Honda OEM #41241-307-010 for select vintage Honda CB models. These rubber damper bushings fit into the...
Honda CB200TK CB175K fork seals

1969-76 Honda CB200TK / CB175K Fork Seals

$18.76 USD
27-1001
Replace your CB175 or CB200T fork seals with this Fork Seal Set, 31 x 43 x 10mm. Made in Japan by OEM supplier.Key Features•...
Épuisé
Universal black 290mm shorty motorcycle shock absorber set

Universal Motorcycle Shorty Shock Absorber Set ~ Black 290mm

$139.95 USD
06-3589
Slam the back end with this Custom Shorty Shock Absorber Set, measuring 290mm (11 3/8") eye-to-clevis, noticeably shorter than stock for custom café, bobber,...
Comparer

1971 Honda CB175K1 · Suspension & Wheel Buying guide

Plan the repair one assembly at a time

Shock mounting nuts, grease fittings and dust caps address different locations. The fork seals and rear-hub bushings linked below have their own dimensions and package information to check against the installed assemblies.

Parts to consider

Honda CB OEM Type Shock Absorber Nut ~ Replaces 90309-315-000 Replica Shock Mounting NutOEM-type replica shock mounting nut with replacement reference 90309-315-000.Voir la pièce Honda CB Swingarm Grease Fitting Nipple (Pk/2) Swingarm Grease FittingsPack of two swingarm grease fittings; replacement reference 96201-30001.Voir la pièce Honda CB Swingarm Dust Seal Cap ~ Genuine Honda 52144-356-005 ~ Replaces 52144-356-005 Swingarm Dust Seal CapGenuine Honda dust seal cap, sold individually; reference 52144-356-005 with CB175K 1971–73 application.Voir la pièce

Pièces connexes : Fork Seal Set · Rear Hub Damper Set

Match the shock hardware to the repair

The mounting nut is an OEM-type replica replacing 90309-315-000, with explicit CB175K 1970–73 coverage. Two nuts are required per motorcycle according to its application notes. Compare the retained shock hardware and mounting arrangement before replacing missing or damaged nuts.

Keep pivot and hub quantities separate

The grease-fitting pack contains two pieces, while the genuine Honda swingarm dust cap is sold individually. The linked rear-hub set contains four bushings. Count the parts needed at each assembly and confirm the fork-seal package quantity before ordering for both fork legs.

Common ordering questions

Are the shock mounting nuts genuine Honda parts?

They are OEM-type replicas with replacement reference 90309-315-000. The separately featured swingarm dust seal cap is genuine Honda. Choose each item by its own description and the mounting position being repaired.

What should I check when the motorcycle has a replacement fork?

Identify the fork assembly and compare its required seal with 31 × 43 × 10 mm. The listed CB175K application applies to the intended assembly; a swapped front end needs seals chosen for that fork.

What should I check before buying rear-hub damper bushings?

Compare the fitted hub layout, existing bushings and reference 41241-307-010. The four-piece package is useful ordering information, but a replaced wheel or market difference still needs an application check.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB175K1

Votre panier

×