VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB175K5 Super Sport — pièces de moto

Tank-side repairs on the 1971 Honda CB175K1 range from replacing a cap rubber to renewing emblem hardware or rear support. Choose the part that matches the problem, with special attention to the longer replacement petcock if the valve also needs work.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Réservoirs, bouchons, robinets et pièces

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB450 CB400 CB350 gas cap rubber seal 17631-329-003

Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003

$7.95 USD
20-0097
Replace the broad-fitment gas cap rubber seal on many classic Hondas with this Gas Cap Rubber Seal, replacing OEM #17631-329-003. Exceptionally wide fitment covering...
Nouveau
Épuisé
Honda CB1000 CB900 CB750 fuel tank emblem clamp nut 87311-634-600

Honda CB Fuel Tank Emblem Clamp Nut ~ Replaces 87311-634-600

$6.25 USD
99-5267
Secure your fuel tank emblem properly with this Fuel Tank Emblem Clamp Nut, designed as a direct replacement for the original Honda hardware. This...
Nouveau
Honda CB450 CL450 CB350 CB72 gas tank filler cap 17620-402-000

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000

$7.95 USD
07-4647
Restore an early-era Honda with this Chrome Gas Tank Filler Cap (with gasket installed), replacing OEM #17620-402-000 / #17620-402-010. Fits the oldest models in...
Nouveau
Honda CB175K CB200K fuel petcock 16950-336-005

1972-74 Honda CB175K / CB200K Fuel Petcock ~ Replaces 16950-336-005

$42.95 USD
07-4649
Replace a leaking or stuck fuel petcock with this Fuel Petcock, a direct replacement for OEM #16950-336-005. Stock fit for the 1972-73 CB175K and...
Honda CB175K rear fuel tank rubber holder 17613-246-000

Rear Fuel Tank Rubber Holder ~ Replaces Honda OEM 17613-246-000

$15.95 USD
33-0021
This aftermarket rear fuel tank rubber holder replaces Honda OEM 17613-246-000 on the listed Honda CB175K applications. It supports the rear of the fuel...
Comparer

1971 Honda CB175K1 · Tank Caps & Hardware Buying guide

Choose the right scope for a tank-side repair

A separate seal keeps a serviceable cap in use, while the chrome cap includes a gasket. Small mounting pieces have their own sold-each quantities and should be counted at the affected locations.

Parts to consider

Honda Gas Tank Filler Cap ~ Replaces 17620-402-000 Chrome Fuel CapChrome filler cap supplied with its gasket installed; replacement references 17620-402-000 and 17620-402-010.Voir la pièce Honda CB Gas Cap Rubber Seal ~ Replaces 17631-329-003 Fuel Cap Rubber SealSeparate replacement cap seal with reference 17631-329-003 for a seal-only repair.Voir la pièce Honda CB Fuel Tank Emblem Clamp Nut ~ Replaces 87311-634-600 Tank Emblem Clamp NutSold individually; replacement references 87311-634-600 and 87311-516-000.Voir la pièce

Pièces connexes : Rear Tank Support Rubber

Avoid ordering the same seal twice

The chrome filler cap arrives with its gasket installed. Choose the separate cap rubber for a seal-only repair after checking that the retained cap remains suitable. If the tank has been replaced, compare its filler arrangement with the cap references rather than relying only on the bike year.

Check support and valve clearance separately

The linked rear tank holder replaces 17613-246-000 and is sold each, with one normally required. Check the retained mounting arrangement after any tank changes. If replacing the petcock too, allow for the replacement being longer than the original 1969–71 CB175K valve and compare its clearance.

Common ordering questions

Do I need a separate gasket for the complete chrome cap?

The complete cap includes a gasket already installed. A separately sold cap rubber is useful for a different job: renewing the seal while retaining a suitable existing cap.

Are the tank emblem clamp nuts sold as a pair?

They are sold individually. Count the fixings needed for the emblems you are repairing and compare references 87311-634-600 and 87311-516-000 with the retained hardware.

What changes if the motorcycle has a replacement tank?

Check the actual filler, petcock attachment and rear support arrangement. A tank swap can change those requirements, and the available petcock already has a longer-than-original qualification for the early CB175K application.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB175K1

Votre panier

×