VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1984 Honda CB125S — Freins et embrayage

A brake or clutch parts order should start with the component being retained. The 1984 Honda CB125S selection brings together linkage hardware, control parts and friction components. The joint and adjuster below are separate choices for a brake rod connection.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB1000 CB900 handlebar clutch lever pivot bolt and nut set 90113-422-000

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90113-422-000

$7.00 USD
73-0998
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt (8mm) & Nut Set, used to fasten the clutch lever in...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Universal Honda-type front master cylinder assembly 13mm

Universal Honda-Type Front Master Cylinder Assembly ~ 13mm

$84.95 USD
08-0262
Upgrade to a universal front master cylinder assembly with this Honda-type unit. Complete with lever, banjo bolt, banjo bolt washers, and brake light switch,...
Solde
Honda CB750 CB125 CB100 rear brake light switch spring 35357-107-010

Honda CB750 / CB125 / CB100 Rear Brake Light Switch Spring ~ Replaces 35357-107-010

$7.00 $6.50 USD
You save $0.50
73-0848
Replace your rear brake stop switch spring with this Rear Brake Light Stop Switch Spring. This is the spring that attaches to the rear...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Épuisé
Honda CB750 CB650 CB550 replacement brake lever for master cylinder

Honda CB Replacement Brake Lever for Master Cylinder 08-0262

$9.95 USD
08-0430
Replace the brake lever on the #08-0262 Master Cylinder Assembly specifically with this Brake Lever. Designed for this particular master cylinder.Key Features• Replacement brake...
Honda CB125S rear friction shoe set 43120-KB9-005

1974-85 Honda CB125S Rear Friction Shoe Set ~ Replaces 43120-KB9-005

$14.95 USD
29-3101
Replace your CB125S rear brake shoes with this Rear Brake Shoe Set, replacing OEM #43120-KB9-005. Diameter 109.5mm, width 25mm.Key Features• Rear brake shoe set•...
Honda CB125 CB100 steel clutch plate 22311-107-000

Honda CB125 / CB100 Steel Clutch Plate ~ Replaces 22311-107-000

$7.00 USD
39-1421
Replace your CB100K or CB125S steel clutch plate with this Steel Clutch Plate, replacing OEM #22311-107-000 / #22311-KN4-680.4 pieces required per bike.Key Features• Steel...
Honda CB125 CB100 clutch friction plate 22201-166-000

Honda CB125 / CB100 Clutch Friction Plate ~ Replaces 22201-166-000

$9.50 USD
39-1094
Replace your CB100K or CB125S clutch friction plate with this Clutch Friction Plate #2, replacing OEM #22201-166-000.5 pieces required per bike, order the number...
Honda CB125S front friction shoe set 43120-KB9-005

1979-85 Honda CB125S Front Friction Shoe Set ~ Replaces 43120-KB9-005

$15.10 USD
29-3101
Replace your CB125S front brake shoes with this Front Brake Shoe Set of 2, replacing OEM #43120-KB9-005. Diameter 109.5mm, width 25mm.Key Features• Front brake...
Magura universal front master cylinder assembly 13mm

Magura Universal Front Master Cylinder Assembly ~ 13mm

$259.00 USD
08-0250
Build a custom front brake setup with this Magura Universal Front Brake Master Cylinder. Features a 13mm piston diameter, 12mm stroke, and a threaded...
Comparer

1984 Honda CB125S · Brake & Clutch Service Parts Buying guide

Define the repair before choosing hardware

The rod joint and adjusting nut serve different roles. A Joker Machine custom adjuster provides a knurled exterior and hex feature as an alternative to the standard nut, while retaining the same stated replacement reference.

Parts to consider

Honda CB750/CB700/CB650/CB550 Brake Rod Joint Brake rod and arm jointSeparate linkage joint offered against replacement reference 95015-32001.Voir la pièce Honda CB Brake Rod Adjusting Nut Brake rod adjusting nutThreaded adjuster offered against replacement reference 95015-42000.Voir la pièce Honda CB Brake Rod Adjuster Knob ~ Joker Machine Joker Machine brake rod adjusterCustom replacement for reference 95015-42000, with a knurled outside and hex-nut feature. Made in the USA.Voir la pièce

Identify the two linkage pieces

The rod joint uses reference 95015-32001. The standard adjusting nut and custom Joker Machine adjuster both use 95015-42000, so they are alternative adjuster purchases rather than two pieces required together. Identify the worn part and inspect its mating rod before choosing.

Check changes made by previous owners

Replacement levers, rods or brake assemblies can change the parts needed even when the motorcycle year is correct. Identify those fitted assemblies before adding control or friction parts to the order. Have the complete brake repair assessed using suitable service information rather than choosing by appearance alone.

Buying questions

How do I choose parts for a previously repaired brake linkage?

Identify the rod and arm currently installed, then confirm the joint and adjuster references against that assembly. If earlier repairs changed either component, establish the thread and mounting requirements before combining replacements.

Is the Joker Machine adjuster a separate part from the standard nut?

It is an alternative custom adjuster for the same stated replacement reference, 95015-42000. Choose the standard nut or the knurled-and-hex Joker Machine version; the rod joint is a different component with its own reference.

What should I check before replacing only the adjusting nut?

Inspect the mating rod threads and the joint condition. A fresh adjuster cannot establish that worn or altered surrounding parts are suitable to reuse in a brake repair.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1984 Honda CB125S

Votre panier

×