VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1981 Honda CB125S — Freins et embrayage

A brake rod joint, adjusting nut and clutch lever pivot solve different wear problems on a 1981 Honda CB125S. Identify the worn connection before ordering hardware, then check whether the surrounding rod, lever or bracket has also been changed.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Freins et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 handlebar clutch lever pivot bolt and nut set 90114-310-000

Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000

$6.95 USD
73-0996
Replace your clutch lever pivot hardware with this Handlebar Clutch Lever Pivot Bolt & Nut Set, used to fasten the clutch lever in place....
Honda CB750 CB650 CB550 CB500 brake rod spring 95014-73100

Honda CB750/CB650/CB550/CB500 Brake Rod Spring

$2.95 USD
29-7006
Replace your brake rod spring with this Brake Rod Spring, replacing OEM #95014-73100. Exceptionally broad fitment across the SOHC and DOHC CB750 lineup, CB650...
Honda CB750 CB700 CB650 CB550 brake rod joint 95015-32001

Honda CB750/CB700/CB650/CB550 Brake Rod Joint

$3.50 USD
73-0843
Replace your brake rod joint with this Brake Rod / Arm Joint, replacing OEM #95015-32001.Key Features• Brake rod / arm joint• Replaces OEM #95015-32001•...
Honda CB750 CB400 CB125S clutch lever 53178-401-651

Honda CB Clutch Lever ~ Replaces 53178-401-651

$9.95 USD
08-0057
Replace a silver-finish clutch lever with this Clutch Lever, a direct replacement for OEM #53178-401-651. Fits the late-'70s CB750K/F Supersport plus the CB400TI/TII and...
Honda CB750 CB700 CB650 CB550 CB500 brake rod adjusting nut 95015-42000

Honda CB Brake Rod Adjusting Nut

$4.50 USD
73-0845
Replace your brake rod adjusting nut with this Brake Rod Adjusting Nut, replacing OEM #95015-42000.Key Features• Brake rod adjusting nut• Replaces OEM #95015-42000• Honda...
Universal Honda-type front master cylinder assembly 13mm

Universal Honda-Type Front Master Cylinder Assembly ~ 13mm

$84.95 USD
08-0262
Upgrade to a universal front master cylinder assembly with this Honda-type unit. Complete with lever, banjo bolt, banjo bolt washers, and brake light switch,...
Épuisé
Honda CB750 CB700 CB650 CB550 brake rod adjuster knob joker machine

Honda CB Brake Rod Adjuster Knob ~ Joker Machine

$29.95 USD
73-1072
Upgrade your brake rod adjuster knob with this Joker Machine Brand Custom Brake Rod Adjuster Knob, replacing OEM #95015-42000.Gives your bike a great custom...
Épuisé
Honda CB750 CB650 CB550 replacement brake lever for master cylinder

Honda CB Replacement Brake Lever for Master Cylinder 08-0262

$9.95 USD
08-0430
Replace the brake lever on the #08-0262 Master Cylinder Assembly specifically with this Brake Lever. Designed for this particular master cylinder.Key Features• Replacement brake...
Nouveau
Honda CB125S clutch cable

1981-82 Honda CB125S Clutch Cable

$21.46 USD
99-4877
Upgrade or restore your classic Honda motorcycle’s clutch system with this high‑quality Clutch Cable — designed to replace a wide range of OEM part...
Honda CB125S rear friction shoe set 43120-KB9-005

1974-85 Honda CB125S Rear Friction Shoe Set ~ Replaces 43120-KB9-005

$14.95 USD
29-3101
Replace your CB125S rear brake shoes with this Rear Brake Shoe Set, replacing OEM #43120-KB9-005. Diameter 109.5mm, width 25mm.Key Features• Rear brake shoe set•...
Honda CB125 CB100 steel clutch plate 22311-107-000

Honda CB125 / CB100 Steel Clutch Plate ~ Replaces 22311-107-000

$7.00 USD
39-1421
Replace your CB100K or CB125S steel clutch plate with this Steel Clutch Plate, replacing OEM #22311-107-000 / #22311-KN4-680.4 pieces required per bike.Key Features• Steel...
Honda CB125 CB100 clutch friction plate 22201-166-000

Honda CB125 / CB100 Clutch Friction Plate ~ Replaces 22201-166-000

$9.50 USD
39-1094
Replace your CB100K or CB125S clutch friction plate with this Clutch Friction Plate #2, replacing OEM #22201-166-000.5 pieces required per bike, order the number...
Honda CB125S front friction shoe set 43120-KB9-005

1979-85 Honda CB125S Front Friction Shoe Set ~ Replaces 43120-KB9-005

$15.10 USD
29-3101
Replace your CB125S front brake shoes with this Front Brake Shoe Set of 2, replacing OEM #43120-KB9-005. Diameter 109.5mm, width 25mm.Key Features• Front brake...
Magura universal front master cylinder assembly 13mm

Magura Universal Front Master Cylinder Assembly ~ 13mm

$259.00 USD
08-0250
Build a custom front brake setup with this Magura Universal Front Brake Master Cylinder. Features a 13mm piston diameter, 12mm stroke, and a threaded...
Épuisé
Honda CB400 CB450 CB350 CB125S black hand lever 53175-467-000

Honda CB Black Hand Lever ~ Replaces 53175-467-000

$9.95 USD
08-0084
Replace a black-finish brake lever on your small-bore classic with this Brake Lever, replacing a range of OEMs (#53175-467-000, #53170-413-670, #53175-402-700, #53175-360-700, #53175-399-700). Fits...
Comparer

1981 Honda CB125S · Brake & Clutch Buying guide

Start with the worn connection

The brake rod uses a separate joint and adjusting nut, while the clutch pivot comes as a bolt-and-nut set. The linked black brake lever and custom adjuster offer further choices when the repair extends beyond these featured pieces.

Parts to consider

Honda CB750/CB700/CB650/CB550 Brake Rod Joint Brake rod jointRod-to-arm joint, replacement reference 95015-32001.Voir la pièce Honda CB Brake Rod Adjusting Nut Brake rod adjusting nutReplacement adjusting nut for reference 95015-42000.Voir la pièce Honda CB Handlebar Clutch Lever Pivot Bolt & Nut Set ~ Replaces 90114-310-000 Clutch lever pivot bolt and nutOne pivot bolt and one nut; replacement references 90114-310-000 and 94001-06200-0S.Voir la pièce

Pièces connexes : Black brake lever · Joker Machine adjuster knob

Keep the brake linkage parts distinct

The joint uses reference 95015-32001; the standard adjusting nut uses 95015-42000. The linked Joker Machine knob replaces the same adjusting-nut reference and adds a knurled surface with a hex-nut feature. Choose the adjuster style separately from deciding whether the joint needs renewal.

Separate a damaged lever from missing pivot hardware

The featured clutch pivot set supplies one bolt and one nut. The linked black brake lever is a separate control-side choice, with a 1980–81 CB125S application. Identify which part is worn before combining a lever purchase with a fastener repair.

Buying questions

What matters if the clutch perch has been replaced?

Compare the fitted perch and lever pivot before selecting hardware. Obtain the required shoulder, thread and bracket dimensions when the original bolt is missing; the motorcycle model cannot identify the fastener used by an aftermarket control.

Can I order the brake joint and nut as one item?

They are separate product choices. The joint carries reference 95015-32001 and the adjusting nut 95015-42000; inspect both locations and select the parts your repair actually requires.

What changes when I choose the custom adjusting knob?

The linked Joker Machine knob uses adjusting-nut reference 95015-42000 and provides a knurled rim plus a hex-nut feature. Compare access around the linkage when choosing its shape. The separate rod joint remains a different repair item.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1981 Honda CB125S

Votre panier

×