VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1979 Honda CB125S — Alimentation en carburant

Carburetor work on a 1979 Honda CB125S can involve a float needle or the separate bowl drain screw. Identify the repair location before ordering. The needle is supplied on its own, while the pictured drain screw includes its O-ring.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Alimentation en carburant

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Nouveau
Honda CB750 CB650 CB125 press in pilot jet set size #40 (pk 4)

Honda CB750 / CB650 / CB125 Press In Pilot Jet Set ~ Size #40 (Pk/4)

$24.64 USD
48-9034
#40 pilot jet set for applications that use press-in style jets. These control fuel flow at idle and low throttle, making them important for...
Épuisé
Honda CB750 CB650 CB550 CB400 CB125 float needle 16011-382-004

Honda CB Float Needle ~ Replaces 16011-382-004

$8.95 USD
48-5010
Replace your float needle (only) with this Float Needle, replacing OEM #16011-382-004.Key Features• Float needle (only)• Replaces OEM #16011-382-004• Honda part name: Valve Set,...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw -a

Honda CB Stock Type Float Bowl Drain Screw ~-A

$6.50 USD
48-5042
Small part, but an important one. This float bowl drain screw with included O-ring allows you to properly drain the carburetor bowl without leaks,...
Nouveau
Épuisé
Honda CB750 CB650 CB125 press in pilot jet set size #38 (pk 4)

Honda CB750 / CB650 / CB125 Press In Pilot Jet Set ~ Size #38 (Pk/4)

$24.64 USD
48-9033
Press In Pilot Jet Set/4 ~ #38 Size Please Double Check you Require the #38 Size Before Ordering Fits: Honda CB750K (1977-78), CB750F (1977-78)...
Nouveau
Honda CB750 CB650 CB125 press in pilot jet set size #42 (pk 4)

Honda CB750 / CB650 / CB125 Press In Pilot Jet Set ~ Size #42 (Pk/4)

$24.64 USD
48-9035
Pilot jet set sized at #42, designed for applications that use press-in style jets. A key component in fuel delivery at idle and low...
Nouveau
Honda CB750 CB650 CB125 press in pilot jet set size #35 (pk 4)

Honda CB750 / CB650 / CB125 Press In Pilot Jet Set ~ Size #35 (Pk/4)

$24.64 USD
48-9028
Replace your press-in pilot jets with this Press In Pilot Jet Set of 4, size #35. Please double-check that you require the stock #35...
Honda CB1100 CB1000 CB900 CB750 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$6.50 USD
48-5042
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring for the later DOHC and Nighthawk lineup.Note: sold each,...
Honda CB400F CB125S fuel petcock 16950-GF6-015

1975-81 Honda CB400F / CB125S Fuel Petcock ~ Replaces 16950-GF6-015

$13.51 USD
12-0078
Fit a petcock to our CB400F aftermarket gas tank or replace the stock one on your CB125S with this Fuel Petcock. An M14 x...
Comparer

1979 Honda CB125S · Carburetor Service Parts Buying guide

Distinguish the fuel-control part from the drain fitting

The needle replaces 16011-382-004; the drain screw is a separate sold-each product with an O-ring. Match each part to the fitted carburetor rather than treating them as a rebuild kit.

Parts to consider

Honda CB Float Needle ~ Replaces 16011-382-004 Float needleNeedle only, replacing 16011-382-004.Voir la pièce Honda CB Stock Type Float Bowl Drain Screw ~-A Bowl drain screw with O-ringIndividually supplied drain screw with its O-ring included.Voir la pièce

Establish the affected part before choosing the order

A float needle and bowl drain screw serve different locations. Inspect the fitted carburetor and identify the source of the problem before selecting either. Use the correct service information for diagnosis; ordering both parts is not a substitute for finding the repair point.

Make a separate list of retained components

The float needle product is expressly needle only. The drain screw is supplied individually with an O-ring. Inspect the surrounding seat and bowl connection separately, then identify any additional parts needed rather than assuming those two purchases complete a carburetor rebuild.

Buying questions

Does the float needle include a replacement seat?

No. It is specified as the float needle only, replacing 16011-382-004. Inspect the retained seat separately and resolve any additional repair need before assuming a needle-only order covers it.

Do I need an O-ring for the pictured drain screw?

The O-ring is included with that drain screw. Compare the existing screw and bowl connection before ordering; an included seal does not establish the condition of the bowl or its receiving thread.

Will these parts suit a replacement carburetor?

Identify that carburetor first and compare the required needle and drain fitting. A replacement carburetor may use different components even when installed on the same 1979 motorcycle. Its own specification should guide the comparison.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1979 Honda CB125S

Votre panier

×