VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1977 Honda CB750K — Commutateurs de guidon

The two listed 1977–78 CB750K handlebar controls have different wire-routing arrangements. The right-hand assembly routes its wiring outside the bar; the left-hand assembly requires internal routing and has a locator pin. Check both the existing control and the handlebars before choosing a replacement.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Commutateurs de guidon

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB400 bar switch assembly right (brake) side 35130-404-671

Honda CB750 / CB550 / CB400 Bar Switch Assembly ~ Right (Brake) Side ~ Replaces 35130-404-671

$74.95 USD
12-0302
Fit the right-side handlebar controls on late-'70s SOHC CBs with this Bar Switch Assembly for the Brake Side in black, replacing OEM #35130-404-671. Wiring...
Honda CB750K CB550K bar switch assembly left (clutch) side 35200-404-671

1977-78 Honda CB750K / CB550K Bar Switch Assembly ~ Left (Clutch) Side ~ Replaces 35200-404-671

$79.95 USD
12-0308
Fit late-'70s CB750K or CB550K left-side controls with this Bar Switch Assembly for the Clutch Side in black, replacing OEM #35200-404-671. Wiring runs inside...
Comparer

1977 Honda CB750K · Handlebar Switches Buying guide

Check each control’s routing against the handlebars

Choose the brake-side or clutch-side control by its application and wire route. This matters particularly on replacement handlebars, where an externally wired right switch does not establish that the left switch will install the same way.

Parts to consider

Honda CB750 / CB550 / CB400 Bar Switch Assembly ~ Right (Brake) Side ~ Replaces 35130-404-671 Right control with external wiringBlack brake-side assembly listed for the 1977–78 CB750K; references 35130-404-671.Voir la pièce 1977-78 Honda CB750K / CB550K Bar Switch Assembly ~ Left (Clutch) Side ~ Replaces 35200-404-671 Left control with internal wiringBlack clutch-side assembly for the 1977–78 CB750K, with a built-in locator pin and internal wiring requirement.Voir la pièce

Check replacement bars before buying the left control

The left assembly’s description requires the wires to run inside the handlebar and notes a built-in locator pin. It also discusses bar preparation for installation. Compare your bars with those requirements and follow the product instructions rather than assuming a control will clamp onto any custom bar unchanged.

Keep other-bike installation notes in context

The right control’s listing also covers other Honda models with their own connector instructions. Its CB400F notes should not be treated as a requirement for the CB750K. Use the 1977–78 CB750K application and compare your existing plugs before planning wiring changes.

Questions about handlebar switches

Do the left and right assemblies both have external wiring?

The right-hand listing describes external wiring. The left-hand listing requires internal wiring and includes a locator pin. These differences are stated for the two featured assemblies, so compare both sides before ordering a pair for replacement handlebars.

Are these controls listed for the 1977 CB750K?

Both featured controls list the 1977–78 CB750K. The right assembly references 35130-404-671, while the left references 35200-404-671. Confirm the fitted controls and wiring if the motorcycle has been modified since manufacture.

Does the right switch require the CB400F connector modification on my CB750K?

The right assembly’s plug-removal and bullet-connector note is specifically for its CB400F application. The CB750K is a separate listed application. Compare the actual connectors and follow the instructions for your motorcycle before making any wiring alteration.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1977 Honda CB750K

Votre panier

×