Pièces pour motos Honda
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.
1975 Honda CB750K · Fuel System Buying guide
The 1975 selection pairs an M20 × 1.5 replacement petcock with a 1975–76 reproduction tank. Carburetor choices range from a one-carb repair kit to four-piece holder sets and separate airbox components.
M20 × 1.5 fuel petcockM20 × 1.5 replacement petcock, reference 16950-341-671. Listed for 1975–76 CB750K tanks; check the connection on any replacement tank.Voir la pièce
Single-carburetor rebuild kitJapanese-made kit for one carburetor, including bowl and top gaskets, O-rings, float needle and seat, jets, needle and adjustment parts.Voir la pièce
Four-piece carb holder setFour carb holders. Replacement band clamps are specified separately as 46–49 mm, with eight called for when renewing them all.Voir la pièce
Pièces connexes : Stock-type air filter · 1975–76 stock-type fuel tank · Carb connector and drain seal kit
Retaining the airbox calls for the stock-type filter and the appropriate carb-to-airbox boots. The holder set is a different purchase from those boots. Identify which rubber connection needs repair before combining a four-piece set with individually ordered boots.
The 1975–76 reproduction tank arrives in primer grey. Lay out the cap, latch, petcock, emblems and mounting pieces you intend to reuse before refinishing; their condition can change the order even when the tank itself is the correct application.
One kit rebuilds one carburetor. It supplies a #110 main jet and #40 pilot jet; those are package contents, not a tuning prescription for a changed intake or exhaust.
Only use the stated M20 × 1.5 thread as a comparison with the fitted tank connection. The 1975 model year cannot identify the outlet on a substituted tank.
The reproduction tank excludes the cap, petcock, side emblems and all additional hardware. Check which of those parts you can retain before ordering replacements.
Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.
Sélectionnez le modèle exact et l’année pour affiner les résultats.
Choisissez votre modèle et l’année.