VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1975 Honda CB750K — Flotteurs et composants de carburateur

Small carburetor parts deserve a precise parts list. This 1975 CB750K category includes a float with pin, connector and drain seals, an individual drain screw and a float-setting gauge. Identify the part or sealing point before ordering a general carb repair package.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 carb fuel line o-ring kit

Honda CB750 / CB550 / CB500 Carb Fuel Line O-Ring Kit

$11.69 USD
48-0791
Refresh all your carb fuel-line and float-bowl seals with this Carb Fuel Line O-Ring Kit, 12 pieces. Includes 8 carb fuel connector tube O-rings...
Honda CB750F CB750K carb float setting tool (1969-76 models)

1969-76 Honda CB750F / CB750K Carb Float Setting Tool (1969-76 Models)

$21.95 USD
20-6510
Set your floats with ease using this Carb Float Setting Tool. This pre-set float-setting gauge is sized for the 1969-76 CB750K and 1975-76 CB750F...
Honda CB750F CB750K carb float 16013-300-004

1969-76 Honda CB750F / CB750K Carb Float ~ Replaces 16013-300-004

$29.95 USD
20-6505
Replace your SOHC CB750 carb float with this Carb Float with Pin, replacing OEM #16013-300-004.4 carb floats are used per bike, order the quantity...
Honda CB750 CB550 CB500 float bowl drain screw o-rings pk 4

Honda CB750 / CB550 / CB500 Float Bowl Drain Screw O-Rings Pk/4

$5.95 USD
48-0793
Replace your float bowl drain screw with O-ring on these earlier models with this Float Bowl Drain Screw with O-Ring 4-Pack.Key Features• Float bowl...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB750F CB750K carb overflow guide 11355-300-000

1971-78 Honda CB750F / CB750K Carb Overflow Guide ~ Replaces 11355-300-000

$7.50 USD
73-0951
Replace your carb overflow guide with this Carb Overflow Guide, replacing OEM #11355-300-000.Key Features• Carb overflow guide• Replaces OEM #11355-300-000• Honda part name: Guide,...
Comparer

1975 Honda CB750K · Carb Floats & Other Carb Components Buying guide

Choose a float, drain-screw repair or connector seals

A replacement float includes its pin. For sealing work, distinguish the bowl drain screw from the connector tubes between carburetors: the twelve-piece seal kit covers both locations, while the separate drain screw includes its own O-ring.

Parts to consider

1969-76 Honda CB750F / CB750K Carb Float ~ Replaces 16013-300-004 Carb float with pinReplacement float with pin, reference 16013-300-004. Order the required number; this is not described as a four-float pack.Voir la pièce Honda CB750 / CB550 / CB500 Carb Fuel Line O-Ring Kit Twelve-piece connector and drain seal kitTwelve seals: eight fuel connector tube O-rings and four float bowl drain seals.Voir la pièce 1969-76 Honda CB750F / CB750K Carb Float Setting Tool (1969-76 Models) Pre-set carb float-setting gaugePre-set gauge for the listed 1969–76 CB750K carburetors. No numerical float-height setting is supplied in its description.Voir la pièce

Pièces connexes : Individual drain screw with O-ring · Carb overflow guide

Separate the leaking joint from the moving parts

The seal kit supplies connector O-rings and drain seals. A float, float needle and drain screw are different components; identify the actual repair point before choosing a broader package. Retain the connector tubes only after their condition has been assessed.

Identify a changed carburetor bank before choosing the gauge

The pre-set gauge is listed for 1969–76 CB750K carburetors. That application does not establish a setting for another carburetor bank installed later. Use the fitted carburetor’s service information for the measurement procedure.

Common questions

Do I need to buy a pin with the replacement float?

The float includes its pin. Check how many floats you are replacing before ordering; the product asks you to order the quantity required.

Does the separate drain screw need an extra O-ring?

The stock-type drain screw is sold individually with an O-ring. Avoid adding a duplicate drain seal unless you need one elsewhere in the repair.

Which seals are supplied for the carburetor connector tubes?

The twelve-piece kit contains eight connector-tube O-rings, plus four bowl drain seals. It supplies seals for the retained tubes rather than new connector tubes.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1975 Honda CB750K

Votre panier

×