Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 / CB750 / CB650 Turn Signal Relay ~ Replaces 38301-415-671

$11.69 USD
73-1104
Replace your turn signal flasher relay with this Turn Signal (Flasher) Relay, 12V/23W, 3-prong, with rubber mount attached. For the series 2 and later...

Honda CB Stock Type Reflector ~ Replaces 33741-340-670

$21.46 USD
11-2303
Restore your mid-'70s Honda's stock reflectors with this Stock-Type Screw-On Reflector with a 6mm thread, replacing OEM #33741-340-670. Broad fitment covering the 1972-78 CB750...

Honda CB Stock Type Front Reflector Rubber Base ~ Replaces 33743-341-670

$8.95 USD
11-2304
Fit the rubber base beneath your stock front reflector with this Stock-Type Front Reflector Rubber Base, replacing OEM #33743-341-670.Key Features• Stock-type front reflector rubber...

1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Stay ~ Replaces 33607-323-670

$19.95 USD
11-2319
Fit the standard-length rear signal stay with this Rear Signal Lamp Stay in chrome, 65mm long, replacing OEM #33607-323-670. Pairs with signal lamp #11-2122....

1971-74 Honda CB750K / CB550K / CB500K Rear Turn Signal Mount & Collar Set ~ Replaces 33605-323-670

$42.95 USD
73-0127
Mount your rear signals with this Rear Turn Signal Mount, Collar and Rubber Set. Includes both left and right sides. Needed when installing the...

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...

1969-74 Honda CB750K / CB550K / CB500K Turn Signal Pinch Bolt Set

$7.00 USD
73-0840
Replace your turn signal mounting hardware with this Turn Signal Pinch Bolt Set. Includes 2x chrome bolts, 2x hex nuts, and 4x flat washers,...
Épuisé
Honda CB750K rear turn signal stay screw set 2

1972-74 Honda CB750K Rear Turn Signal Stay Screw Set/2

$8.95 USD
49-0001
Replace your rear turn signal stay screws with this Rear Signal Lamp Stay Screw Set of 2. Includes the screws that fasten the rear...

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay

$13.95 USD
73-1106
Mount a front turn signal with this Front Signal Lamp Stay, Chrome.Body length 40mm, thread 30mm, total length 70mm.Note: we sell these in various...

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay ~ Short Type

$13.95 USD
73-1105
Mount a front turn signal with this Front Signal Lamp Stay with nut and washer, Short Type, Chrome.Body length 26mm, thread 21mm, total length...

Honda CB Turn Signal Lamp Gasket ~ Replaces 33443-268-671

$4.61 USD
11-2085
Service your early CB750 or classic twin turn signal with this Turn Signal Lamp Gasket, replacing OEM #33443-268-671. Pairs with our signal lens #11-2110...

Honda CB Rear Turn Signal Stay ~ Replaces 33441-369-000

$18.95 USD
11-2318
Fit an extended-length rear signal stay with this Rear Signal Lamp Stay in chrome, 125mm long, replacing OEM #33441-369-000. This is longer than the...

1973 Honda CB750K · Turn Signal Lamps, Stems, Lenses & Reflectors Buying guide

Compare the signal stays and mounting hardware

The front stay listings separate body length, thread length and overall length. The pinch-bolt set supplies hardware for two signals. Match those descriptions to the parts fitted rather than treating every stem or fastener package alike.

Compare the whole stay measurement

The longer stay is 65 mm at the body, 25 mm at the thread and 90 mm overall. The short stay is 26 mm at the body, 21 mm at the thread and 47 mm overall. Compare corresponding dimensions; neither body length nor total length alone identifies every aspect of the mounting.

Count the signals covered by the hardware

The pinch-bolt pack covers two signals with two bolts, two nuts and four flat washers. Two packs are specified for all four signals. These fasteners clamp the lamp to the stem, a separate connection from attaching the stem itself.

Common questions

Should I compare stay body length or total length?

Compare both, plus thread length. The longer stay is 65 / 25 / 90 mm and the short version 26 / 21 / 47 mm for body / thread / total respectively. Use the same measurement points on the installed stay.

Does the short front stay include its nut and washer?

Yes. The short stay includes a nut and washer. Its description also pairs it with the specified replacement signal lamp, so check the lamp-to-stem connection when using a different lamp.

Will one pinch-bolt set cover all four turn signals?

No. One pack covers two signals with two bolts, two nuts and four washers. Order two packs only when all four mounts need that hardware.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Votre panier

×