VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB750K — Câbles d’accélérateur et de starter, poignées et tubes

This 1971 Honda CB750K throttle section lists separate pull and push cables, a nylon sleeve and small adjusting parts. Compare the throttle housing and routing on the motorcycle before choosing replacements. The selection covers throttle components; a choke cable is not currently listed here.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Câbles d’accélérateur et de starter, poignées et tubes

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 throttle cable pull 17910-341-000

Honda CB750 / CB550 / CB500 Throttle Cable ~ Pull ~ Replaces 17910-341-000

$25.95 USD
51-2505
Replace your CB750 throttle pull cable with this Throttle Cable "Pull Type", replacing OEM #17910-341-000. End-to-end length 40". Made in Japan.Key Features• Throttle cable,...
Honda CB750F CB750K throttle cable push 17920-341-000

1971-76 Honda CB750F / CB750K Throttle Cable ~ Push ~ Replaces 17920-341-000

$26.23 USD
51-2506
Replace your CB750 throttle push cable with this Throttle Cable "Push Type", replacing OEM #17920-341-000. Made in Japan.Key Features• Throttle cable, push type• Replaces...
Épuisé
Honda CB throttle sleeve 53141-300-010

Honda CB Throttle Sleeve ~ Replaces 53141-300-010

$9.95 USD
02-2462
Refresh the throttle feel on your Honda with this Nylon Throttle Sleeve, a replacement for OEM Ref. #53141-300-010 with exceptionally broad fitment across the...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000Fitment / Compatibility• Honda CB750K...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000Fitment / Compatibility• Honda CB750K...
Comparer

1971 Honda CB750K · Throttle/Choke Cables, Throttles & Sleeves Buying guide

Match both cable functions to the fitted controls

The K1 uses separate opening and closing throttle cables. Keep those functions distinct when identifying replacements: a changed housing or carburetor bank needs its own cable-end and routing check.

Parts to consider

Honda CB750 / CB550 / CB500 Throttle Cable ~ Pull ~ Replaces 17910-341-000 Pull throttle cableJapanese-made cable listed for 1971–76 CB750K, with a stated 40-inch end-to-end length.Voir la pièce 1971-76 Honda CB750F / CB750K Throttle Cable ~ Push ~ Replaces 17920-341-000 Push throttle cableJapanese-made cable listed for 1971–76 CB750K; replaces reference 17920-341-000.Voir la pièce Honda CB Throttle Sleeve ~ Replaces 53141-300-010 Nylon throttle sleeveListed for the 1971–78 CB750K application and replaces reference 53141-300-010. Compare the fitted housing.Voir la pièce

Pièces connexes : Throttle adjusting bolt · Throttle adjusting spring

Compare both ends when replacing the cables

When replacing both cables, compare their housing and carburetor-end fittings before ordering. A changed throttle housing or carburetor bank may need a different combination even though the motorcycle retains its K1 frame.

Check modified handlebars and throttle assemblies

The catalog’s model application describes the replacement cable, but a changed handlebar or throttle housing can alter what your build requires. Compare the installed ends and routing before ordering. The sleeve and small adjusting parts are separate products, so review them individually rather than assuming they come with a cable.

Choosing parts for your 1971 CB750K

Are the pull and push cables sold together?

They have separate product listings, each identified by its own function and reference. Order the required cable or both as appropriate after checking the fitted controls. The nylon throttle sleeve is another separate item.

Does the push cable also measure 40 inches?

The pull listing expressly gives a 40-inch end-to-end length. The push listing does not provide that same dimension, so it should not be copied across. Confirm the needed length if the bike has modified handlebars or routing.

How do Honda references identify the two throttle cables?

Honda identifies 17910-341-000 as cable A for opening the throttle and 17920-341-000 as cable B for closing it. Match each function and end fitting when checking replacement cables.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB750K

Votre panier

×