VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1971 Honda CB750K — Flotteurs et composants de carburateur

Choose 1971 Honda CB750K carb floats and small components by their exact location and package contents. This section includes floats with pins, fuel connector seals, drain screws and a setting gauge. Keep a replacement part order separate from the tools needed to check the completed work.

Fermer ×
Votre moto enregistrée Choisissez votre modèle Honda CB

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Flotteurs et composants de carburateur

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB750 CB550 CB500 carb fuel line o-ring kit

Honda CB750 / CB550 / CB500 Carb Fuel Line O-Ring Kit

$11.69 USD
48-0791
Refresh all your carb fuel-line and float-bowl seals with this Carb Fuel Line O-Ring Kit, 12 pieces. Includes 8 carb fuel connector tube O-rings...
Honda CB750F CB750K carb float setting tool (1969-76 models)

1969-76 Honda CB750F / CB750K Carb Float Setting Tool (1969-76 Models)

$21.95 USD
20-6510
Set your floats with ease using this Carb Float Setting Tool. This pre-set float-setting gauge is sized for the 1969-76 CB750K and 1975-76 CB750F...
Honda CB750F CB750K carb float 16013-300-004

1969-76 Honda CB750F / CB750K Carb Float ~ Replaces 16013-300-004

$29.95 USD
20-6505
Replace your SOHC CB750 carb float with this Carb Float with Pin, replacing OEM #16013-300-004.4 carb floats are used per bike, order the quantity...
Honda CB750 CB550 CB500 float bowl drain screw o-rings pk 4

Honda CB750 / CB550 / CB500 Float Bowl Drain Screw O-Rings Pk/4

$5.95 USD
48-0793
Replace your float bowl drain screw with O-ring on these earlier models with this Float Bowl Drain Screw with O-Ring 4-Pack.Key Features• Float bowl...
Honda CB1100 CB1000 CB900 CB750 CB550 air screw needle o-ring

Honda CB Air Screw Needle O-Ring

$1.95 USD
48-5043
Replace your air screw needle O-ring with this Air Screw Needle O-Ring, 2.8mm x 1.2mm.Note: sold each, order the quantity you require.Key Features• Air...
Honda CB750 CB550 CB500 CB450 CB400 float bowl drain screw

Honda CB Stock Type Float Bowl Drain Screw

$7.50 USD
48-5041
Replace your stock-type float bowl drain screw with this Float Bowl Drain Screw with O-Ring.Note: sold each, order the quantity you require.Key Features• Stock-type...
Honda CB750F CB750K carb overflow guide 11355-300-000

1971-78 Honda CB750F / CB750K Carb Overflow Guide ~ Replaces 11355-300-000

$7.50 USD
73-0951
Replace your carb overflow guide with this Carb Overflow Guide, replacing OEM #11355-300-000.Key Features• Carb overflow guide• Replaces OEM #11355-300-000Fitment / Compatibility• Honda CB750K...
Honda CB750 CB550 CB500 CB360 throttle adjusting bolt 53190-300-000

Honda CB Throttle Adjusting Bolt ~ Replaces 53190-300-000

$9.95 USD
73-0846
Replace your throttle adjusting bolt with this Throttle Adjusting Bolt, replacing OEM #53190-300-000.Key Features• Throttle adjusting bolt• Replaces OEM #53190-300-000Fitment / Compatibility• Honda CB750K...
Honda CB750 CB550 CB500 CB360 throttle adjusting spring 53191-300-000

Honda CB Throttle Adjusting Spring ~ Replaces 53191-300-000

$9.50 USD
73-0847
Replace your throttle adjusting spring with this Throttle Adjusting Spring, replacing OEM #53191-300-000.Key Features• Throttle adjusting spring• Replaces OEM #53191-300-000Fitment / Compatibility• Honda CB750K...
Comparer

1971 Honda CB750K · Carb Floats & Other Carb Components Buying guide

Identify the small component before replacing the assembly

Float bowl drain screws, connector tube O-rings and air screw seals are different pieces. Compare the location being serviced, the old component and the quantity in the chosen package to avoid buying a similar-looking part.

Parts to consider

1969-76 Honda CB750F / CB750K Carb Float ~ Replaces 16013-300-004 Carb float with pinReplacement float supplied with its pin; the listing notes four floats on the motorcycle. Order the quantity required.Voir la pièce Honda CB750 / CB550 / CB500 Carb Fuel Line O-Ring Kit Twelve-piece connector seal kitEight carb fuel connector tube O-rings and four float bowl drain seals, as specified in the listing.Voir la pièce Honda CB750 / CB550 / CB500 Float Bowl Drain Screw O-Rings Pk/4 Four drain screws with O-ringsPack containing four float bowl drain screws with their O-rings; compare with the fitted bowls.Voir la pièce

Pièces connexes : Individual stock-type drain screw · Individual air screw O-ring · Float-setting gauge

Check what a seal package actually covers

The 12-piece connector kit lists eight connector tube O-rings and four bowl drain seals. It is not described as a complete set of every carburetor seal. The air screw O-ring and bowl drain screws have separate listings, so compare your repair list with the stated contents before adding more parts.

Choose the float and float valve separately

A replacement float is supplied with its pin. The float valve is a separate service choice; identify which component needs replacement before combining it with a float or drain-hardware order.

Choosing parts for your 1971 CB750K

Does the carb float come with a pin?

Yes. The product is described as a carb float with pin and replaces reference 16013-300-004. The listing notes four floats per motorcycle, but order only the quantity required for the carburetors you are servicing.

Are drain screws available individually?

Yes. This category includes an individual stock-type drain screw with O-ring and a four-pack of drain screws with O-rings. Compare the fitted bowl and choose the package that matches the number being replaced.

Will the connector seal kit duplicate seals supplied with new drain screws?

The connector kit includes four bowl drain seals, and the drain-screw packs include their own O-rings. Compare the contents before ordering both when the repair concerns only the bowl drains.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1971 Honda CB750K

Votre panier

×