VintageCB750, au service des motocyclistes CB depuis 2010

À propos Pourquoi nous choisir? Avis clients Livraison Retours Nous joindre
Favoris
0 Panier

Votre panier est vide.

Parcourir toutes les pièces
Total (USD): $0.00
Voir le panier
Menu
Rechercher
Favoris
Panier 0
Ma moto Choisissez votre modèle Honda CB

Rechercher des pièces

Recherche dans toutes les pièces Honda CB

Exemple : oil filter (filtre à huile) ou une référence OEM.

1969 Honda CB750K — Clignotants, supports, cabochons et réflecteurs

This 1969 CB750K selection focuses on turn signal mounting stays, fastening hardware, rear ground cables and a flasher relay. Measure the existing stems and compare the rear mounting arrangement before ordering, particularly when your motorcycle carries replacement lamps or altered wiring.

Fermer ×
1969 Honda CB750K

Magasiner par catégorie

La plupart des commandes sont expédiées le jour ouvrable même ou le suivant Garantie de compatibilité Pièce répertoriée pour votre modèle et votre année? Si elle ne convient pas comme indiqué, nous trouverons une solution. Soutien technique Demandez à notre équipe de vous aider à choisir la bonne pièce Honda CB.
Consultation en cours Clignotants, supports, cabochons et réflecteurs

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Honda CB900 CB750 CB650 turn signal relay 38301-415-671

Honda CB900 / CB750 / CB650 Turn Signal Relay ~ Replaces 38301-415-671

$11.69 USD
73-1104
Replace your turn signal flasher relay with this Turn Signal (Flasher) Relay, 12V/23W, 3-prong, with rubber mount attached. For the series 2 and later...
Honda CB750 CB550 CB500 CB400 CB360 front turn signal stay

Honda CB Front Turn Signal Stay

$12.95 USD
11-2167
Replace a damaged front signal stay with this Front Signal Lamp Stay in chrome. Body length 65mm, thread 25mm, total length 90mm. Pairs with...
Honda CB750K CB550K CB500K turn signal pinch bolt set

1969-74 Honda CB750K / CB550K / CB500K Turn Signal Pinch Bolt Set

$7.00 USD
73-0840
Replace your turn signal mounting hardware with this Turn Signal Pinch Bolt Set. Includes 2x chrome bolts, 2x hex nuts, and 4x flat washers,...
Honda CB750 CB550 CB500 CB350 front turn signal stay

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay

$13.95 USD
73-1106
Mount a front turn signal with this Front Signal Lamp Stay, Chrome.Body length 40mm, thread 30mm, total length 70mm.Note: we sell these in various...
Honda CB750 CB550 CB500 CB350 front turn signal stay short type

Honda CB750 / CB550 / CB500 / CB350 Front Turn Signal Stay ~ Short Type

$13.95 USD
73-1105
Mount a front turn signal with this Front Signal Lamp Stay with nut and washer, Short Type, Chrome.Body length 26mm, thread 21mm, total length...
Honda CB750K rear turn signal ground cables set 2 33620-300-000

1969-71 Honda CB750K Rear Turn Signal Ground Cables Set/2 ~ Replaces 33620-300-000

$7.95 USD
73-1117
Restore proper rear turn signal function with this pair of high-quality ground cables, designed to match OEM# 33620-300-000. These cables ensure a solid electrical...
Épuisé
Honda CB750K front turn signal stay nut and washer set

1969-72 Honda CB750K Front Turn Signal Stay Nut & Washer Set

$9.95 USD
49-0002
Replace your front turn signal stay nuts and washers with this Front Signal Lamp Stay Nut & Washer Set. These are the nuts and...
Nouveau
Honda CB750 CB450 CL450K1 CL450K2 rear turn signal stay 33607-292-000

Honda CB Rear Turn Signal Stay ~ Genuine Honda 33607-292-000 ~ Replaces 33607-292-000

$59.95 USD
99-5164
This genuine Honda rear turn signal stay mounts the rear turn signal to the motorcycle frame and helps keep the signal straight, secure, and...
Comparer

1969 Honda CB750K · Turn Signal Parts Buying guide

Get the signal position and mounting details right

Front stays are offered in several lengths, and the early rear setup has its own bracket and ground cable listings. Compare the location being repaired before choosing mounting parts for your signal lamps.

Parts worth comparing

Honda CB Front Turn Signal Stay Chrome front signal stayListed dimensions: 65mm body, 25mm thread and 90mm overall length. Compare all three with your fitted stay.Voir la pièce Honda CB Rear Turn Signal Stay ~ Genuine Honda 33607-292-000 ~ Replaces 33607-292-000 Genuine Honda rear signal staySold individually and listed for the 1969–71 CB750K. Confirm bracket shape and mounting details.Voir la pièce 1969-71 Honda CB750K Rear Turn Signal Ground Cables Set/2 ~ Replaces 33620-300-000 Early rear signal ground cable pairTwo rear signal ground cables, each listed at 550mm overall length, for the 1969–71 CB750K.Voir la pièce

Pièces connexes : Turn signal pinch bolt set · Short front signal stay · Front stay nut and washer set

Choose a stay by its complete dimensions

The front listings include 90mm, 70mm and 47mm overall stays, with different body and threaded lengths. A shorter overall stem is not the only distinction. Compare your lamp attachment, mounting position and required dimensions before choosing the appearance you want.

Plan the rear mounting and wiring together

The genuine rear stay and the rear ground cable pair both list 1969–71 CB750K applications, but they perform different jobs. Check whether the bracket, ground connection or fastening hardware needs attention. Inspect altered wiring separately instead of assuming a mounting part resolves an electrical fault.

Useful answers before ordering

Does the front stay length include the threaded section?

The descriptions give body, thread and total lengths separately. For example, the 90mm stay lists a 65mm body and 25mm thread. Compare the same measurements on your fitted part to avoid choosing by the chrome section alone.

How much hardware is in the pinch bolt set?

The set includes two chrome bolts, two hex nuts and four flat washers, described as hardware for two signals. The listing calls for two sets if you need enough of this hardware for all four signals.

Is the listed flasher suitable for custom LED indicators?

The flasher description explicitly says it is not for custom LED lights. It lists a three-prong, 12V/23W arrangement. Compare the existing connectors and follow the chosen lamps’ flasher requirements rather than assuming compatibility from the category.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité
Catégories de pièces pour 1969 Honda CB750K

Votre panier

×