1969 Honda CB750K — Supports, caoutchoucs et fixations

This 1969 Honda CB750K category groups early stock-style instrument clamps, meter rubbers, internal seals and gauge restoration details. Match each item to its location: an external support rubber, an internal seal and a gauge cover address different parts of the assembly.

Préciser la sous-catégorie

Consultation en cours Supports, caoutchoucs et fixations

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

Honda CB750K speedo tachometer meter rubber 37235-300-029

1969-72 Honda CB750K Speedo/Tachometer Meter Rubber ~ Replaces 37235-300-029

$29.95 USD

Replace your speedo / tach meter rubber with this Speedometer / Tachometer Meter Rubber, replacing OEM #37235-300-029.Note: one used with the speedo and one...

Honda CB750 / CB550 / CB500 Speedometer / Tachometer Internal Rubber Seal

$11.95 USD

Replace your gauge internal seal with this Speedometer / Tachometer Internal Rubber Seal. Replaces the ripped, dried, or missing rubber internal seal.Key Features• Speedo...

1969-72 Honda CB750K Stock Type Speedo/Tach Clamp Hardware Set

$4.61 USD

Refresh the hardware on your early CB750K speedo and tach clamps with this 8-piece Speedo / Tach Clamp Hardware Set. Includes hardware for both...

Honda CB750K speedometer clamp 53231-300-000

1969-72 Honda CB750K Speedometer Clamp ~ Replaces 53231-300-000

$21.95 USD

Replace your speedometer clamp with this Stock Style Chrome Speedometer Clamp, replacing OEM #53231-300-000.Hardware not included, sold separately below as #17-6946.Key Features• Stock-style chrome...

Honda CB chrome speedometer and tachometer cover set

Honda CB Chrome Speedometer & Tachometer Cover Set

$44.95 USD

Dress up your gauge cluster with this Chrome Speedometer & Tachometer Cover Set. These chrome-plated covers fit over your stock speedo and tach to...

Honda CB750K tachometer clamp 53232-300-000

1969-72 Honda CB750K Tachometer Clamp ~ Replaces 53232-300-000

$21.95 USD

Replace your tachometer clamp with this Stock Style Chrome Tachometer Clamp, replacing OEM #53232-300-000.Hardware not included, sold separately below as #17-6946.Key Features• Stock-style chrome...

Nouveau

1969-70 Honda CB750K Sandcast Type Gauge Cover with Lens

$109.95 USD

Restore your Sandcast CB750 gauges with this Sandcast Type Gauge Cover with Lens. With this reproduction gauge cover, you can recondition your gauges so...

Honda CB750K tachometer and speedometer jewel set

1969-71 Honda CB750K Tachometer & Speedometer Jewel Set

$49.95 USD

Restore your gauge indicator jewels with this Tachometer & Speedometer Jewel Set. Includes four jewels / lenses: red (hi-beam), orange (turn signals), green (neutral),...

Honda CB750K speedometer tripmeter reset knob 37237-300-000

1969-72 Honda CB750K Speedometer Tripmeter Reset Knob ~ Replaces 37237-300-000

$26.95 USD

Replace your speedometer tripmeter knob with this Speedometer Tripmeter Reset Knob, replacing OEM #37237-300-000. These buttons are often damaged and are no longer available...

Comparer

1969 Honda CB750K · Gauge Mounts & Hardware Buying guide

Match the mounting part to the gauge and location

The early clamps have separate speedometer and tachometer listings. Support rubbers and clamp hardware are also listed separately, while covers, jewels and reset knobs require checks against the particular instrument being restored.

Parts to consider

1969-72 Honda CB750K Speedometer Clamp ~ Replaces 53231-300-000

Early speedometer clampStock-style chrome clamp for 1969–72 CB750K; mounting hardware is sold separately.Voir la pièce

1969-72 Honda CB750K Tachometer Clamp ~ Replaces 53232-300-000

Early tachometer clampStock-style chrome tachometer clamp for 1969–72 CB750K; hardware is a separate listing.Voir la pièce

1969-72 Honda CB750K Speedo/Tachometer Meter Rubber ~ Replaces 37235-300-029

Early meter rubberMeter support rubber for 1969–72 CB750K; one is used with each instrument.Voir la pièce

Pièces connexes : Eight-piece gauge clamp hardware set · Internal seal for stock-type ND gauges · Tripmeter knob for a 3mm shaft

Separate support rubbers from internal seals

The meter rubber is listed for the early gauge mounting arrangement, with one used for each instrument. The internal rubber seal instead specifies stock-type Honda CB750 ND-brand gauges. Identify which location is worn or missing and check the fitted gauge type rather than treating the two rubber products as alternatives.

Review restoration details individually

The sandcast-type cover with lens has a stated 1969–70 Sandcast Version application and contains one cover. That specific description should be checked against your instruments rather than assumed from model year. Likewise, the tripmeter reset knob specifies a 3mm shaft, making the fitted instrument another important check.

Gauge Mounts & Hardware questions

Do the early gauge clamps include hardware?

The speedometer and tachometer clamp descriptions both say the hardware is sold separately. An eight-piece set is listed for those two stock-type early clamps. Review the existing fittings before deciding whether the clamp alone is sufficient.

How many meter rubbers are used?

The meter rubber listing states that one is used with the speedometer and one with the tachometer. Order the quantity needed for the gauges being serviced; do not assume one listed item covers the complete instrument pair.

Will the internal rubber seal fit a custom gauge?

The internal seal is specified for stock-type Honda CB750 ND-brand gauges. Check the gauge maker and construction before ordering; the motorcycle’s year does not establish compatibility with a custom instrument.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 1969 Honda CB750K

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces

Magasiner par catégorie