1969 Honda CB750K — Outils pour moteur, direction et embrayage

The 1969 Honda CB750K workshop selection includes clutch nut tools, an alternator rotor puller, fork tools and an engine stand. Start with the actual service job and fitted component dimensions; a tool listed for the model may still address a different assembly or conversion.

Préciser la sous-catégorie

Consultation en cours Outils pour moteur, direction et embrayage

Pièces pour motos Honda

Choisissez votre modèle et l’année pour voir les pièces répertoriées pour votre moto.

Trier par

Honda CB1100 CB1000 CB900 CB750 CB450 clutch center nut removal tool

Honda CB Clutch Center Nut Removal Tool

$15.10 USD

Remove your clutch center nut without damage with this Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without damaging...

Honda CB1100 CB1000 CB900 CB750 clutch center nut removal tool premium

Honda CB Clutch Center Nut Removal Tool ~ Premium

$26.95 USD

Remove clutch center nuts on different bikes with this Premium Clutch Center Nut Removal Tool, the perfect tool for easier removal and fitting without...

1969-78 Honda CB750 SOHC Alternator Rotor Puller

$12.95 USD

Pull your SOHC CB750 alternator rotor with this Alternator Rotor Puller, 20mm x M1.5 right-hand thread, for internal-thread rotors.Key Features• Alternator rotor puller• 20mm...

Honda CB1100/CB1000/CB900/CB750 Oil Filter Wrench

$14.95 USD

Remove and install spin-on oil filters with this 3/8" Drive Tripod Oil Filter Wrench. Designed for our aftermarket spin-on cartridge oil filters.Key Features• 3/8"...

Honda CB750 / CB650 / CB550 / CB500 35/36mm Fork Seal Driver

$49.95 USD

Install 35mm or 36mm fork seals cleanly with this 35/36mm Fork Seal Driver. High-quality carbon steel with split design. Use for easy installation of...

Épuisé

1969-78 Honda CB750 Engine Rebuild Stand ~ For Honda CB750 SOHC

$144.95 USD

Streamline your engine rebuild with this high-quality CB750 SOHC Engine Rebuild Stand. Built to handle the weight and shape of the Honda CB750 SOHC...

Honda CB750 / CB550 Fork Cap Wrench ~ 24mm

$7.00 USD

Remove 24mm fork caps without damage with this 24mm Non-Marring Fork Cap Wrench. Fits all motorcycles with 24mm fork caps. Lets you remove fork...

Universal Motorcycle Fork Cap Wrench ~ 35mm

$7.00 USD

Fork Cap Wrench ~ 35MM Size for custom or restoration work on classic Honda CB motorcycles. Key Features Aftermarket part Sold as: Each Fitment...

Comparer

1969 Honda CB750K · Engine & Fork Tools Buying guide

Choose the tool by its working size and component

The listed tools use different drive sizes, threads and working dimensions. Compare those details with the part being serviced, and keep aftermarket spin-on filter tools distinct from the original filter arrangement on your motorcycle.

Parts to consider

Clutch center nut tool24mm inside diameter, for use with a 3/8-inch driver, and listed for the early CB750K.Voir la pièce

1969-78 Honda CB750 SOHC Alternator Rotor Puller

SOHC alternator rotor puller20mm × M1.5 right-hand thread for internal-thread CB750 SOHC alternator rotors.Voir la pièce

24mm non-marring fork cap wrenchListed for stock 24mm CB750 fork caps; check the cap size if the forks have been changed.Voir la pièce

Pièces connexes : CB750 SOHC rebuild stand · 35/36mm split fork seal driver · Wrench for aftermarket spin-on filters

Distinguish the clutch tool options

The standard clutch center nut tool has a 24mm inside diameter and uses a 3/8-inch driver. The premium tool provides 20mm and 24mm ends for a 1/2-inch drive extension. Compare those descriptions with the nut and equipment for the job rather than choosing solely by the premium label.

Check fork and filter changes explicitly

The 24mm wrench specifies stock fork caps, and the split seal driver lists 35/36mm fork applications. Measure the relevant fitted components if the fork assembly has changed. The oil filter wrench is specifically described for aftermarket spin-on cartridge filters, which is a separate suitability check from the motorcycle year.

Engine & Fork Tools questions

What thread does the alternator rotor puller use?

The listed puller has a 20mm × M1.5 right-hand thread and is intended for internal-thread CB750 SOHC alternator rotors. Compare that specification with the fitted rotor before selecting it, especially if the engine or charging assembly has changed.

Does the 35mm cap wrench fit a stock 24mm cap?

The cap wrench choices have different stated sizes. The stock-cap listing identifies 24mm, while another wrench is labelled 35mm. Choose by the actual cap size rather than assuming a 35mm fork tube requires a 35mm cap wrench.

Is the oil filter wrench for every CB750 filter?

The description specifies aftermarket spin-on cartridge oil filters. Confirm the filter system installed on the engine before choosing that tool; it should not be treated as a general wrench for every original or modified CB750 oil-filter arrangement.

Vous ne savez pas quelle pièce choisir ?

Envoyez-nous le modèle et l’année de votre moto, des photos de la pièce actuelle et les détails de toute modification par rapport au montage d’origine.

Poser une question sur la compatibilité

Catégories de pièces pour 1969 Honda CB750K

Aide et renseignements

Sélectionnez votre moto

Rechercher des pièces

Magasiner par catégorie